That was the best instruction I've ever seen for stenciling. Thank you so much! I've had a project idea for many years that I may now actually try to accomplish without such fear of failure.
Very clear instructions. I've watched a number of the instructional videos for stenciling and this was, by far, the clearest and easiest to follow. Thank you
Nice video! Great tips. Love the toothpick idea. Even small brushes tent to fray, spread a bit. Also, cutting board as canvas = genius! Thanks from ABQ
I was getting ready to try my hand and stenciling a pattern on a piece of flea market furniture I was using to experiment with - something I wouldn't mind "ruining" if it went badly. So I watched several UA-cam videos about stenciling, how to avoid the paint leaking under the stencil, etc., but yours was the ONLY one I saw that mentioned using the makeup sponges (which amazingly enough I happened to have on hand!). Oh. My. God. That worked SO well!! I'd experimented on a piece of scrap wood with one of the those little sponge daubers and didn't care for that, but didn't really want to invest in a stenciling brush just yet either. So glad I didn't because the makeup sponges worked amazingly well. Thank you so much for sharing your tricks!
I just want to say thank you SO MUCH for the tip on using the makeup sponges! It was a total game changer!! When I first started stenciling I bought the special stenciling brushes, the sponge stampers....I just couldn't get it to work. Even with the spray adhesive...which is another game changer in itself! The makeup sponges are in a league of their own! They worked amazing and so much cheaper than the other brushes. Thank you so much for the tips!
The make-up sponge idea... SUPERB. I've struggled with the painting (even with mod podge) bleeding. I used my cricut and stencil vinyl... So much better with the sponge. THANK YOU
Thank you for this. I have a kid's bathroom stool with stenciled letters that were faded and chipped and I was struggling with how to preserve or restore them. I started carved and Dremeling thinking I'd fill the letters with colored epoxy. It's a beast to get clean lines. I have to hunt down some 1/2 inch and 3/8 inch stencils, tracing paper to make a guide on letter placement, them follow your method and redo the letters.
I'm so glad you found my tutorial. Yes, it can definitely be tough get clean lines. I have been using this process for years and have been very happy with the results.
Great tip for the makeup sponges. I bought some for my regular painting at the dollar store. I also heard that if you stencil first with the same color as your background, in this case the wood, the bleed through would match the wood and not be as noticeable. Thanks!
It has to be repositionable. That means it stays tacky for awhile so you can remove the stencil without it leaving a reside or peeling off the finish of whatever you are stenciling. You can usually find a couple of options at stores like Michaels as well as one Amazon. Two I like are Stencil Ease Spray Adhesive - amzn.to/3voF2Py and Aleene's repositionable spray adhesive - amzn.to/3peCjqT
Do you spray or brush on a clear coat sealer after stencil is dry? And to be clear: you apply the Mod Podge onto the wood before you apply the stencil that has been spayed with the contact adhesive?
After you finished your project. What top coat did you use? I have been using Delta Satin Finish and Hello Hobby Varnishes Matte. I’ve noticed when I’m applying the top coat on wood I get air bubbles and white streaks. Using Chalk paint and/or cheap acrylic 2oz. bottles. How can you prevent this for happening? Do have a tutorial on how to apply a top coat? Thank you.
Thank you so much. I am very crafty but could not do a stencil without paint seepage for nothing. Like the make up sponge and the spray adhesive. Heard about the mod podge but have not used that yet. Really thanks for this tutorial.
Can you use the adhesive spray if you are planning to stencil on a surface that is already painted? I have a small dining table that is painted black, I would like to add a charcoal gray stencil design to the top. I feel the adhesive spray would be the best for coverage and minimize/eliminate bleed. Thank you!
Spray the adhesive on the stencil and then it is ready to use immediately. Put it in place on your wood slices and stencil. As soon as you are done stenciling remove the stencil. There will be adhesive residue on your stencil that you can clean off when you are done but there shouldn't be residue on the wood. Good luck!
I am stencing on sanded wood that has been painted background color. Can I still use the spray adhesive on my stencil and if so will it leave adhesive on the background paint when I remove the stencil??
Thanks! Personally I probably wouldn't because most paints don't stick to wax well. But if you want to wax first and then stencil with a good chalk paint, it would probably work.
Where and when do you use the mod podge? Is it over the stencil? Is it in place of the repositioning spray? Is it on the wood when done and completely dry? Thanks. I tried stenciling this morning, and it was a mess.
Great question. When using the mod podge, put the stencil in place, paint over the stencil with mod podge to seal in the edges. Then keep the stencil in place and go over it with paint. I hope that makes it clearer!
Thanks! If there is glue residue on your sign, I would let the paint fully dry for several days first and then test goo gone in a small section to make sure it doesn't disturb the paint. Goo gone works great for removing any adhesive from the stencil too. And make sure the spray adhesive you use is repositionable because it shouldn't leave much residue on the sign.
Thanks! If you use repositionable spray adhesive, it doesn't stick the stencil down permanently. It just gets tacky enough to stay in place and then as long as you remove it before too much time has passed, it pulls away easily.
Question: I just sponge painted stencils on my stained wood. This will be going outside, so what can I put over the paint to keep the letters from peeling? Mod podge, maybe?
You definitely want to put a clear sealer or topcoat. I put together this article with the best topcoats and sealers. www.lovelyetc.com/the-best-and-worst-sealers-for-painted-furniture/
How long can you leave the stencil on project without doing any damage. IE: if you have a multicolored intricate pattern that will take a lot of time. Thanks
You don't have to stain the wood. You can stencil over bare wood or wood that is already finished. But if you want to stain it first, Minwax's oil-penetrating stains work well. You can buy small cans to use for small projects. My favorite medium brown shade is special walnut. Make sure the stain has fully dried before stenciling over it. You may also want to use a polyurethane sealer to seal the stain before stenciling but for small decor items you can probably get away with skipping the sealer.
It's more about the paint that you use. You don't have to use wood stencils. Just follow the steps shown so you don't have any issues with the finish. Good luck!
Where can I get the reusable stencil to make a porch sign? and what size should I use for my sign? I bought a sheet of wood and had them cut it into four 5ft.5" tall and 11" wide. this my first time and I want to stop just admiring everyone beautiful sign and try making me one. Thanks for sharing your tips and creations.
Yes, you can definitely do it! I found this set of stencils on Amazon that make two different vertical porch stencils - amzn.to/3GyyDGC. And I bet you can find more just by googling 'porch stencil' Good luck!
So, just to understand, if we put the mod podge on first, then we would be painting over the mod podge instead of the wood, correct? I'm not sure I quite understand. Thank you!
Hi. After putting your stencil in place, but before stenciling, you can paint a thin layer of Mod Podge over the top of the stencil. This helps keep the stencil in place and eliminate any leaking. Then you go ahead and paint. Hope this helps!
@@LovelyEtc Thanks! Sorry, but just one more clarification, please . . . When you paint the thin layer of Mod Podge over the top of the stencil, it's as though you are just outlining the letters on the top edge, right? You don't want any of the Mod Podge to actually touch the wood that you are eventually going to be stenciling with paint, right? I guess my question is, if you're just painting a thin layer of Mod Podge over the top of the stencil, I don't see how it makes a difference with the stenciling that is going to be coming up, or what happens underneath the stencil. Thanks!
Great tutorial. I have used a spray-on adhesive that I bought at a craft store for some of my plastic stencils. But had issues because the adhesive also stuck to the wood which was partially painted. So when I removed the stencil the paint came too. I had to sand and redo the whole wood round, very frustrating. Do you recommend the spray adhesive that you used in this video? Any suggestions from anyone would be helpful. Thanks ahead of time. :)
Yes, the one I used is Alene's repositionable spray adhesive and I haven't had problems with it. Make sure any spray adhesive you use is repositionable - meaning the glue stays tacky so you can move the stencil around once you've attached it. Another thing to keep in mind is it can take fresh paint a few weeks to fully cure or harden so I wouldn't use spray adhesive if you are stenciling something that has just been painted.
Thanks for the video. This may be a dumb question, but does acrylic paint wash off the wood once it's dry? Does it have to be sealed? I'd like to make an outdoor sign. TIA
Not a dumb question! Acrylic paint won't wash off once it is dry. But if you are planning to use this outside, using a sealer might be a good idea to make it last longer. The sealer will help protect the paint from fading over time from sun and rain.
Do you have to wait for the mod podge to dry or do you paint on it while it's still wet? Also, do you put the stencil down and then put the MP over the stencil or the other way around? Thanks!
Thank you! If you use modpodge, just put your stencil in place and then brush a thin layer of mod podge over the stencil. You want to be sure to brush the mod podge over everywhere you will be painting. That seals the tiny gaps between the stencil and then wood. Let the mod podge dry, leaving the stencil in place, and then paint as usual.
Mod podge is non-toxic and water-based and can be used on toys, but they say on their website not to use it on things teething babies will put in their mouths.
I've never had tacky stuff left behind on the wood. Make sure you are using repositionable adhesive and try to keep it on the wood for only a few minutes. That should keep it from leaving behind a residue. But if for some reason, there is a bit of residue, try very lightly wiping it with alcohol or an adhesive remover. Just be careful if your wood is finished because it could remove the finish.
I put matte Mod Podge down first, but it ended up pulling up the paint when I lifted the stencil up. I don't know how people make it work! I'm going to try to fix up the issues with your toothpick trick! Thanks!
Oh no! Hopefully the toothpick fixes it up well! In the future, another trick you can try if you are stenciling a painted surface is to paint over the stencil with the same paint color as your base, let it dry, and then paint your actual stencil color. It does the same thing as the mod podge. I hope that helps for next time!
Thank you so much, you are so sweet! You don't have to use mod podge - I skipped it. But if you are going to use it, paint it over the stencil. It will seal the stencil to the wood to keep paint from slipping under the stencil. Then when you are finished, the stencil should peel away easily without messing up the paint.
@@dropndeal You are right, I feel the same way about Xmas and Christmas. I’m 73 and I’m constantly looking for shortcuts, so that would be my excuse if I needed one. Tell ur friend I’m sorry.
It's mostly just preference. I like the look of actual paint better than vinyl letters; I feel like I can always tell when a sign is made from vinyl. Although you can also use vinyl letters as a stencil by painting the letter color, adding the vinyl, painting the background color, and removing the vinyl. That method looks good tool I just find stenciling easier.
Hi! Great video. Now I see why I had so much paint bleeding for my first project. Could you recommend another temporary adhesive spray? The one you are showing in your video is $42 on Amazon…. A bit too expensive 😅😅
Yikes, $42 is definitely too much! I just checked and it looks like the price is down now, but another great option is Stencil Ease Spray Adhesive - amzn.to/3voF2Py
If you use mod podge, just put your stencil in place on the wood and brush a coat of mod podge over the stencil - you want to add the mod podge over the entire design. The mod podge will help seal the edges of the stencil to the surface you are stenciling. And since it is clear, it won't show. Once the mod podge dries, paint your stencil as normal. Then remove the stencil and that's it!
Hi! Good question. As long as your painted surface is completely dry the spray adhesive will not cause any damage. Of course, you don't want to overuse it, but as long as you are spraying it as recommended on instructions you are good to go!
Love this video I'm a beginner it helps allot one question what if you wanted to use another stencil design on the same board lol if I added a little flower design with the saying is it safe to spray it again or would it mess the other stencil design up
You can definitely add a second stencil. Just do your first stencil and make sure the paint has fully dried. You can do the spray again, but I would wait a few days in between to give the first design time to cure. (It takes time for the paint to fully harden even when it is dry to the touch). Or you could just try to arrange it so the adhesive is not sticking directly to what you just painted. Good luck!
LOVE videos that cut to the chase no silly music or slow intros. You’re the BEST!
I'm so glad you found it helpful!!
That was the best instruction I've ever seen for stenciling. Thank you so much! I've had a project idea for many years that I may now actually try to accomplish without such fear of failure.
Thank you! I hope your project turns out just like you've imagined!
@@LovelyEtc 11
This is the best most easiest video I have watched for stenciling and I cant wait to try it out
Thank you so much and wish me luck!
So glad to hear that!
Very clear instructions. I've watched a number of the instructional videos for stenciling and this was, by far, the clearest and easiest to follow. Thank you
I love hearing that. Thank you!
Nice video! Great tips. Love the toothpick idea. Even small brushes tent to fray, spread a bit. Also, cutting board as canvas = genius! Thanks from ABQ
Thank you!
I have had so much trouble with stenciling, until I saw your video. The makeup wedge has made all of the difference. Thank you so much.
Thank you so much. This was a great help.
I was getting ready to try my hand and stenciling a pattern on a piece of flea market furniture I was using to experiment with - something I wouldn't mind "ruining" if it went badly. So I watched several UA-cam videos about stenciling, how to avoid the paint leaking under the stencil, etc., but yours was the ONLY one I saw that mentioned using the makeup sponges (which amazingly enough I happened to have on hand!). Oh. My. God. That worked SO well!! I'd experimented on a piece of scrap wood with one of the those little sponge daubers and didn't care for that, but didn't really want to invest in a stenciling brush just yet either. So glad I didn't because the makeup sponges worked amazingly well. Thank you so much for sharing your tricks!
Great advice! I especially like what you told us about how to make a stencil not look like a stencil! Thank you.
So glad you found it helpful.
Definitely picked up a handful of tips. Thank you for setting me up for success on this coffee table I'm gifting!
So glad it helped!
I just want to say thank you SO MUCH for the tip on using the makeup sponges! It was a total game changer!! When I first started stenciling I bought the special stenciling brushes, the sponge stampers....I just couldn't get it to work. Even with the spray adhesive...which is another game changer in itself! The makeup sponges are in a league of their own! They worked amazing and so much cheaper than the other brushes. Thank you so much for the tips!
First timer here. Thank you, thank you, thank you!!☺️
You're so welcome!
What wonderful, detailed instructions! Thank you. I learned a lot!❤️
I'm so glad it helped!
Thank you for this video. How do you remove the stickiness from the wood afterwards since you're using the adhesive spray?
This has made my life so much easier. Your instructions were so easy to follow
I'm so glad it helped!
The makeup sponge technique is genious! Who woulda thunk? AND the Mod Podge idea, fabulous! Thanks for posting! 🥰
The make-up sponge idea... SUPERB. I've struggled with the painting (even with mod podge) bleeding. I used my cricut and stencil vinyl... So much better with the sponge. THANK YOU
I am so glad it helped! The makeup sponge really does make a huge difference.
Thank you. My first time stenciling.
Good luck! Stenciling is such a quick way to make great stuff!
I have looked at many but you have helped me the best that is inexpensive and that works the best. /thanks!
Glad to help!
Awesome video with valuable tips &tricks! That was beautiful stenciling 😊
Thanks so much! 😊
Love the video. If I wanted to use vinyl, what kind of vinyl and do I spray the vinyl?
Thank you for this. I have a kid's bathroom stool with stenciled letters that were faded and chipped and I was struggling with how to preserve or restore them. I started carved and Dremeling thinking I'd fill the letters with colored epoxy. It's a beast to get clean lines. I have to hunt down some 1/2 inch and 3/8 inch stencils, tracing paper to make a guide on letter placement, them follow your method and redo the letters.
I'm so glad you found my tutorial. Yes, it can definitely be tough get clean lines. I have been using this process for years and have been very happy with the results.
Thank you! New to stenciling here and this makes it so much clearer for me!
I'm so glad it helped!
The toothpick trick was great. I honestly never would have thought to close the gaps on a stencil lol. Looks awesome!
The sticky spray doesn't leave the wood sticky?
Thank you! And no, as long as you use repositionable spray adhesive, I haven't had any problems with it making the wood sticky.
Great tip for the makeup sponges. I bought some for my regular painting at the dollar store. I also heard that if you stencil first with the same color as your background, in this case the wood, the bleed through would match the wood and not be as noticeable. Thanks!
Yes, that is a great tip too! I don't usually use it on bare wood because it can be hard to match the color, but do it on painted surfaces a lot!
Best instructions ever!!! Question though can i use any multipurpose spray adhesive. I have lots of the Elmer's multipurpose spay adhesive
It has to be repositionable. That means it stays tacky for awhile so you can remove the stencil without it leaving a reside or peeling off the finish of whatever you are stenciling. You can usually find a couple of options at stores like Michaels as well as one Amazon. Two I like are Stencil Ease Spray Adhesive - amzn.to/3voF2Py and Aleene's repositionable spray adhesive - amzn.to/3peCjqT
Do you spray or brush on a clear coat sealer after stencil is dry? And to be clear: you apply the Mod Podge onto the wood before you apply the stencil that has been spayed with the contact adhesive?
Thank youfor your video! It was awesome
Glad you enjoyed it!
Good instruction. Do you spray after stenciling with a sealer?
Great video, thanks for the tips. Do you need to let the paint dry before removing the stencil?
I wondered that too do you peel as soon as your done or do you let paint dry
Great video Carey! Thanks for the tips !😃
You're welcome. I am glad it was helpful.
Such a clear explanation, thank you
Glad it was helpful!
Great video and loved the make-up sponges tip! I just splashed out £10 on a stippling brush - wished I'd seen your video first!
Yes, the sponges work so well! But hopefully your brush will work well for you too.
After you finished your project. What top coat did you use? I have been using Delta Satin Finish and Hello Hobby Varnishes Matte. I’ve noticed when I’m applying the top coat on wood I get air bubbles and white streaks. Using Chalk paint and/or cheap acrylic 2oz. bottles. How can you prevent this for happening? Do have a tutorial on how to apply a top coat? Thank you.
What a great tutorial! Now I’m prepared to start stenciling.
Have fun!
I'm so grateful for this video
Thank you! That is great to hear!
This video was so helpful. Thank you so much😊
Great tutorial. Wow who knew about using a toothpick to fill in the spaces👍🏽.
Glad it was helpful!
Great tutorial. I'm getting ready to do my first stencil and this is so helpful!
Glad it was helpful! Have fun!!
Thank you so much. I am very crafty but could not do a stencil without paint seepage for nothing. Like the make up sponge and the spray adhesive. Heard about the mod podge but have not used that yet. Really thanks for this tutorial.
I'm so glad I could help!
Can you use the adhesive spray if you are planning to stencil on a surface that is already painted? I have a small dining table that is painted black, I would like to add a charcoal gray stencil design to the top. I feel the adhesive spray would be the best for coverage and minimize/eliminate bleed. Thank you!
The adhesive spray should still work fine, but always read the instructions for your specific type of paint.
Thank u this is the best video I've watched for stenciling!I'm also a perfection-ist! I'm a new subscriber so I am happy I found your channel!
Hi. I am new to crafting. This helps. I bought the spray. I have wood slice ornaments. Do I just let the adhesive dry? Does it stay sticky?
Spray the adhesive on the stencil and then it is ready to use immediately. Put it in place on your wood slices and stencil. As soon as you are done stenciling remove the stencil. There will be adhesive residue on your stencil that you can clean off when you are done but there shouldn't be residue on the wood. Good luck!
Thanks for your tips. Love the sponge idea!!!
I am stencing on sanded wood that has been painted background color. Can I still use the spray adhesive on my stencil and if so will it leave adhesive on the background paint when I remove the stencil??
Want to try this, only one question, do you let the paint dry before taking off the stencil?
You can remove the stencil right away, just carefully remove it so you aren't smudging the paint. Hope that helps!
Good job! Very informative. I’ve heard some wax the surface before applying paint is this ok to do?
Thanks! Personally I probably wouldn't because most paints don't stick to wax well. But if you want to wax first and then stencil with a good chalk paint, it would probably work.
That toothbrush and modpodge trick is awesome! 👏
Yes, it helps so much!
Where and when do you use the mod podge?
Is it over the stencil?
Is it in place of the repositioning spray?
Is it on the wood when done and completely dry?
Thanks.
I tried stenciling this morning, and it was a mess.
You want to cover the piece with mod podge as a sealer. It will protect it. Hope that helps.
Great tips! Thank you!
Can I ask a question? When do you use the Mod Podge, before or after you use the paint. Sorry, it wasn't clear to me!
Thanks for the tips! Would you wait for the mod podge to dry before putting the stencil down?
Great question. When using the mod podge, put the stencil in place, paint over the stencil with mod podge to seal in the edges. Then keep the stencil in place and go over it with paint. I hope that makes it clearer!
Yes let it dry first
Great video. I have a question if my wood is painted is that spray adhesive going to bring my paint up with it when removing the stencil?
It could, especially if the wood was painted pretty recently. It might be safer to use painter's tape in that situation.
Thank you so much for the tips! Can’t wait to try this again and see the results!
Good luck!!
How can I clean the glue residue from my painted sign? Your video is excellent! Thank you!
Thanks! If there is glue residue on your sign, I would let the paint fully dry for several days first and then test goo gone in a small section to make sure it doesn't disturb the paint. Goo gone works great for removing any adhesive from the stencil too. And make sure the spray adhesive you use is repositionable because it shouldn't leave much residue on the sign.
Thank you so much! I’m trying to fix an error.. this is definitely going to help, for the next project to come out better
I'm glad I could help - good luck on your next project!
Very nice tips Thank You For Sharing❤️❤️
I'm so glad they helped!
Very cool...silly question 🤔 so if you used adhesive spray how did stencil come off so nicely?.....great video
Thanks! If you use repositionable spray adhesive, it doesn't stick the stencil down permanently. It just gets tacky enough to stay in place and then as long as you remove it before too much time has passed, it pulls away easily.
Great video!!! Excellent instructions and easy to follow!! 5 STARS!!
I'm so glad it was helpful!
Question: I just sponge painted stencils on my stained wood. This will be going outside, so what can I put over the paint to keep the letters from peeling? Mod podge, maybe?
You definitely want to put a clear sealer or topcoat. I put together this article with the best topcoats and sealers. www.lovelyetc.com/the-best-and-worst-sealers-for-painted-furniture/
How long can you leave the stencil on project without doing any damage. IE: if you have a multicolored intricate pattern that will take a lot of time. Thanks
Thank you for your time and tips!
My pleasure!
Thank you, great tips!! 😊
My pleasure!
Hi, great video! Do I have to stain the wood first before doing the stencils? If yes, what do you recommend? TIA
You don't have to stain the wood. You can stencil over bare wood or wood that is already finished. But if you want to stain it first, Minwax's oil-penetrating stains work well. You can buy small cans to use for small projects. My favorite medium brown shade is special walnut. Make sure the stain has fully dried before stenciling over it. You may also want to use a polyurethane sealer to seal the stain before stenciling but for small decor items you can probably get away with skipping the sealer.
@@LovelyEtc great thanks😊
@@LovelyEtc do you use oil base paints to stencil?
Do you have to use specific wood stencils the stencil a wood dresser or can you use a regular stencil
It's more about the paint that you use. You don't have to use wood stencils. Just follow the steps shown so you don't have any issues with the finish. Good luck!
What brand of repositional adhesive do you recommend
Where can I get the reusable stencil to make a porch sign? and what size should I use for my sign? I bought a sheet of wood and had them cut it into four 5ft.5" tall and 11" wide. this my first time and I want to stop just admiring everyone beautiful sign and try making me one. Thanks for sharing your tips and creations.
Yes, you can definitely do it! I found this set of stencils on Amazon that make two different vertical porch stencils - amzn.to/3GyyDGC. And I bet you can find more just by googling 'porch stencil' Good luck!
Thank You great instructions!
So, just to understand, if we put the mod podge on first, then we would be painting over the mod podge instead of the wood, correct? I'm not sure I quite understand. Thank you!
Hi. After putting your stencil in place, but before stenciling, you can paint a thin layer of Mod Podge over the top of the stencil. This helps keep the stencil in place and eliminate any leaking. Then you go ahead and paint. Hope this helps!
@@LovelyEtc Thanks! Sorry, but just one more clarification, please . . . When you paint the thin layer of Mod Podge over the top of the stencil, it's as though you are just outlining the letters on the top edge, right? You don't want any of the Mod Podge to actually touch the wood that you are eventually going to be stenciling with paint, right? I guess my question is, if you're just painting a thin layer of Mod Podge over the top of the stencil, I don't see how it makes a difference with the stenciling that is going to be coming up, or what happens underneath the stencil. Thanks!
Wonderful tutorial!! ❤
Thank you! 😊
Great tutorial. I have used a spray-on adhesive that I bought at a craft store for some of my plastic stencils. But had issues because the adhesive also stuck to the wood which was partially painted. So when I removed the stencil the paint came too. I had to sand and redo the whole wood round, very frustrating. Do you recommend the spray adhesive that you used in this video? Any suggestions from anyone would be helpful. Thanks ahead of time. :)
Yes, the one I used is Alene's repositionable spray adhesive and I haven't had problems with it. Make sure any spray adhesive you use is repositionable - meaning the glue stays tacky so you can move the stencil around once you've attached it. Another thing to keep in mind is it can take fresh paint a few weeks to fully cure or harden so I wouldn't use spray adhesive if you are stenciling something that has just been painted.
Thanks for the video. This may be a dumb question, but does acrylic paint wash off the wood once it's dry? Does it have to be sealed? I'd like to make an outdoor sign. TIA
Not a dumb question! Acrylic paint won't wash off once it is dry. But if you are planning to use this outside, using a sealer might be a good idea to make it last longer. The sealer will help protect the paint from fading over time from sun and rain.
Great video..thanks so much. I’m planning to use stencil on gold leaf...would you think I can use the same techniques..thx
I haven't ever tried it with gold leaf so I can't say for sure, but it's worth a shot!
HALLELUJAH!! I finally now know what I've been doing wrong THANK YOU!!!
Glad I could help!
Do you have to wait for the mod podge to dry or do you paint on it while it's still wet? Also, do you put the stencil down and then put the MP over the stencil or the other way around? Thanks!
Put the stencil down and mod podge over it. Let it dry and then paint!
@@LovelyEtc can you use glossy modge podge?
I LOVE THE TOOTHPIC IDEA
I loved your video. How do you apply the mod podge when you use it?
Thank you! If you use modpodge, just put your stencil in place and then brush a thin layer of mod podge over the stencil. You want to be sure to brush the mod podge over everywhere you will be painting. That seals the tiny gaps between the stencil and then wood. Let the mod podge dry, leaving the stencil in place, and then paint as usual.
These tips have really helped me. Thank you so much.
I'm so glad!
Thank you for sharing.
You're welcome!
Thanks for this video! Do you know if mod podge is safe to use for baby furniture? X
Mod podge is non-toxic and water-based and can be used on toys, but they say on their website not to use it on things teething babies will put in their mouths.
Great tips. How do you get the tacky stuff that is on the wood when you lift the stencil?
I've never had tacky stuff left behind on the wood. Make sure you are using repositionable adhesive and try to keep it on the wood for only a few minutes. That should keep it from leaving behind a residue. But if for some reason, there is a bit of residue, try very lightly wiping it with alcohol or an adhesive remover. Just be careful if your wood is finished because it could remove the finish.
Awesome video! Leaned some new tips! Absolutely beautiful and the stencil wasn't bad either!😉
Haha, thanks. Glad it helped!
@@LovelyEtc You're welcome my dear. 🥰
I put matte Mod Podge down first, but it ended up pulling up the paint when I lifted the stencil up. I don't know how people make it work! I'm going to try to fix up the issues with your toothpick trick! Thanks!
Oh no! Hopefully the toothpick fixes it up well! In the future, another trick you can try if you are stenciling a painted surface is to paint over the stencil with the same paint color as your base, let it dry, and then paint your actual stencil color. It does the same thing as the mod podge. I hope that helps for next time!
Love ur soothing voice and u are beautiful. Thanks u for ur tips. Did u day paint modpodge over ur stencil or under?
Thank you so much, you are so sweet! You don't have to use mod podge - I skipped it. But if you are going to use it, paint it over the stencil. It will seal the stencil to the wood to keep paint from slipping under the stencil. Then when you are finished, the stencil should peel away easily without messing up the paint.
@@dropndeal You are right, I feel the same way about Xmas and Christmas. I’m 73 and I’m constantly looking for shortcuts, so that would be my excuse if I needed one. Tell ur friend I’m sorry.
Thank you. This is exactly what I needed. :)
Glad it was helpful!
Question... what are the advantages of using stencils method rather than just use the vinyl letters? Or is it just a preference? Thanks
It's mostly just preference. I like the look of actual paint better than vinyl letters; I feel like I can always tell when a sign is made from vinyl. Although you can also use vinyl letters as a stencil by painting the letter color, adding the vinyl, painting the background color, and removing the vinyl. That method looks good tool I just find stenciling easier.
Hi! Great video. Now I see why I had so much paint bleeding for my first project.
Could you recommend another temporary adhesive spray? The one you are showing in your video is $42 on Amazon…. A bit too expensive 😅😅
Yikes, $42 is definitely too much! I just checked and it looks like the price is down now, but another great option is Stencil Ease Spray Adhesive - amzn.to/3voF2Py
@@LovelyEtc thank you, but this one even more . It is $54 😂 maybe because I am in Canada? 😢😔
Great tutorial. I learned alot of neat tricks👏
I'm so glad!
Ty so much! Perfect tips.
Glad it was helpful!
How can I clean the adhesive from the back without using harsh chemicals such as goo gone, etc. thanks in advance! Love the tut
I've had good luck using dawn dish soap and hot water, but it does take a bit of elbow grease.
Nice job
Thanks!
Thank you!!
My pleasure!
You mention about using the mod podge, but I'm not clear on how you said apply the mod podge on the stencil. And thanks again for mant great tips
If you use mod podge, just put your stencil in place on the wood and brush a coat of mod podge over the stencil - you want to add the mod podge over the entire design. The mod podge will help seal the edges of the stencil to the surface you are stenciling. And since it is clear, it won't show. Once the mod podge dries, paint your stencil as normal. Then remove the stencil and that's it!
Love the toothpick trick.... thanks
It makes such a big difference!
Great instructional video!
Thank you!
if you are stenciling over a painted surface that is already finely finished won't the spray adhesive kinda ruin the painted surface?
Hi! Good question. As long as your painted surface is completely dry the spray adhesive will not cause any damage. Of course, you don't want to overuse it, but as long as you are spraying it as recommended on instructions you are good to go!
Love this video I'm a beginner it helps allot one question what if you wanted to use another stencil design on the same board lol if I added a little flower design with the saying is it safe to spray it again or would it mess the other stencil design up
You can definitely add a second stencil. Just do your first stencil and make sure the paint has fully dried. You can do the spray again, but I would wait a few days in between to give the first design time to cure. (It takes time for the paint to fully harden even when it is dry to the touch). Or you could just try to arrange it so the adhesive is not sticking directly to what you just painted. Good luck!
will acrylic paint stick to finished wood?
Yes, acrylic paint sticks well to most surfaces. But if it is a super shiny finished wood, you may need to lightly sand it first.
Did you put the spray adhesive on back and front of stencil?
Spray it on the back of the stencil - it will hold it in place on the wood.
love the toothpick!
It is definitely a help!