Rogue Fab & Motorhead Garage Interview and Demo on Motor Trend - Portable hydraulic tube bender DIY
Вставка
- Опубліковано 30 лип 2024
- We went to Johnson City, TN to meet the crew at Motorhead Garage (Motor Trend). We taught them how to use the M600 bender and Tube Notcher, and shot a short piece to air on the Motor Trend Tv channel!
Dave Dobson loved the deeper hole saws we came up with and he couldn't believe how easy the M600 was to use with the joystick operated electric/hydraulic setup. He said they have never seen a more portable machine that does this well bending tube! They plan to use their M600 on future projects in their own shop.
Comparing the RogueFab bender vs JD2 tube benders or any other brand, the first thing you notice is the vertical layout (vs JD2 or Baileigh being horizontal). The space savings and portability are second to none. The easy to use clamping system is a breeze to bend with. The ability to set coplanar bends closer than any other machine on the market is a feature that not even JMR or Pro Tools can challenge Rogue Fab with. Our bender works better than any DIY or homebrew setup for nearly the same price. And you get factory support and a warranty that are the best in the business. Trust your chassis fabrication tool needs to Rogue Fabrication. Made in the USA for the entire Rogue World. - Авто та транспорт
That's my boy, right there! Wish I could say he's a chip of the ole block, but the fact is, I have to call HIM for technical advice! Kudos, Dude!
Thx Dad!
Impressive at first glance.
Thank you Pierre! We're always coming out with new tools, too. Be sure to check back often or subscribe!
That’s incredible. This is perfect for my upcoming project with my son. This upcoming year is His senior year homeschooling; we’re planning his math course to be 100% practical application.
That sounds amazing! Here is a link to our bending 101 page. This goes in depth about the math behind our bender. also in our tech section we have tube design calculators. www.roguefab.com/bending-101/
Here is also a video of Joe giving a rundown on some of the math also
ua-cam.com/video/pV5TcAQAc1s/v-deo.html
If there is anything I can help with just give us a call I am Josh in customer service
@@RogueFabrication Thanks so much. Will do
This looks like one awesome bender! I would love to have one in my shop for building roll cages and whatever I can dream up. Definitely be one in my future. thanks for the videos.
Thx Mark. They are very easy to use, you're going to love it!
Very smooth flow in describing.
Great feedback thank you!!
Great video! Joe you are a natural at demoing your bender and explaining it.
Nice work man 👍
Thx Mike!
Great job! It is awesome to see the company networking, growing and being recognized! Congratulations!
Thanks so much!
This is a awesome bender. Would love to have one in my shop for roll cages and whatever else I can think of to use it for.
We've found all kinds of uses for bent tube... hand rails, trailer protection, racks, people/fall protection, repair work, making tools, etc
Dang joe, awesome to see you out there networking! Can’t wait to watch this one!
Thank you, Craig! -Joe
Great video very informative!
Glad you enjoyed it!
Yes!!! That was badass! 🔥👍🏼🔥
Thanks Big Chop!
I always enjoy your videos. I can't wait until my XHD is in my hands so I can produce this level of quality for my customers.
Great how is it working for you?
@@RogueFabrication The bender far exceeds my expectations. I had a Pro Tools bender, previously. The speed and repeatable results the ( now a 625 ) produces make it one of the smartest decisions I have ever made.
Awesome video
Thanks Matt!
Nice work brotha!
Appreciate it!
Way to go guys!! Oregon made!!
YESSIR!
Nice demo Joe! Your a natural in front of the camera. Do you offer a buy out, say if some fool bought a bender from the other guys and has purchased several of the dies but is having buyers remorse, wishing he would have purchased yours? Asking for a friend 🙄🙄
Send me a email at sales@roguefab.com so we can chat there. -Josh in customer service
Nice!
Thx JAmes! Can't wait to watch the premiere with you and the rest of our 11 fans! :)
@@RogueFabrication Great job. I've been on the fence between this bender and the JD2 model 54 and the more I see this bender the more I'm leaning towards it.
@@RogueFabrication Are you Designing a rotary indexer with table bend stops or do you feel the clamp blocks can achieve the same results when repeating the same bends in production mode
Anyone else getting hit up by motorhead garage since this video went live? I know myself and another fabricator have been hit up by them.
Buying one in july!!!! saving all year for that bad boy, just hope I can afford the cost of metal by then! haha do better government! Jokes aside... congrats on the success your machine has earned it.
Thank you very much. We hope metal comes down in price sometime too :/
Do you offer a bending class?
Not yet, just videos and a lot of articles on our web oage so far. We might in the future. -Joe
Cuánto cuesta esa makina
Costo 925 dolares hasta mas (con opciones). ¡Este precio incluje un die! Hydrolicos costo mas o menos 100-200 dolares. Todos precios en nuestro sitio de web por www.roguefab.com.
“Shipped to your house with die under $1000”
That didn’t age well
Yeah, nobody could have predicted material prices doubling. Good call!