Beautiful my brother this video was exactly what I needed. I’m swapping out the lame 99-02 console for this one. I like this one better. Excellent video and well done.
I am about to do this swap and all i could find were videos of doing the center console to jump seat swap. im not sure why everyone wants the jump seat. i prefer the console look and i never use the jump seat. Thank you for the great tutorial!!!
People like the jump seat because for people like me who are 6’ 7” tall the console hits our knees. I like this video though, very helpful to reverse engineer, as I can’t find a good jump seat install video.
I like the center console, I have two 2000 1500 one is bottom line with crank windows the jump seat to me was a waist of time. The other is a lt fully loaded with center console and it looks so much better. Did a good job. Cheers
Thanks man and yeah it has an alarm along with a couple of different kill switches steering wheel lock and it also stays behind a locked gate with cameras and all LOL. And when I do take it out I make sure I’m always close to it lol. Sounds like overkill but u have to take care of you’re investment.
@@differentgarageprojects5656 I went and got the parts and they ended up being light grey tan. My whole interior is dark charcoal grey. The headliner is tan. So I went with the bottom half of my dash light grey tan. And it made it pop 100$ fuck the jump seat haha
Looks very nice! I have a 2000 gmc sierra if I buy a console do I have to also get the knee panel and a glovebox or will the one that’s already in will work? Thanks!
Viejon una pregunta esa consola también se puede poner en una single cab sierrra 2002 claro con sus respectivos plásticos del vehículo donante le comentó porq tengo una y se la quite a una turbo diésel Silverado 2005 y se la quiero poner a mi sierra single cab ya conseguí todos esos plásticos pero me dicen q si otros q no
I bought one with the 2 trim pieces on each side for 100 bucks. Also has a sub in it. How would I configure the wires to use that sub when I replace it from the Jump seat
That’s not bad at all you can always look up at wiring diagram online or you can install your own speaker and just run the wires off it. Or you can get the whole harness off the truck you got that part from and try to do it that way
2005 gmc denali. But they come in many models from 2003 through 2007 classic body style Silverado, sierra, denali, tahoe, yukon, avalanche and suburban
Crimps taps are always 100% a BAD idea and will be a future problem to deal with if not an electrical hazard. I cut out Every crimp taps I find and do it the correct way.
You’re absolutely right I ran into a few problems already with the crimp taps. Sometimes my lights would work. Sometimes they would flicker. So I got rid of the crimp taps and fix my problem!
@@Aries-us9cy yea i know it sucks man lol. I’m sure you can find a part on eBay as long as its for the full length center console. Like the one on the video. Make sure you compare pictures lol
I'm trying to do the exact opposite I want to get rid of my console and it looks like I'll be needing those pieces you took off of your - These still have them are they for sale
we are made in HIS image A good prayer: I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS. Romans 10:5/10 ct...❤️k JESUSisLord!Amen... Amen.. If you'd like to call someone who cares 83 For Truth. bc you don't know when you'll die? .y r u hesitant.......... ...... .. ........
Helpful information I’m thinking the opposite 😅 i would like to remove the center console on my Escalade 2005 to just have space and replace it with refrigerator any thoughts ?
Do you happen to know what that trim that bolts up to the dash is call or the part number??
15118821
You had my respect at “I’m a horder I collect things”!!
Best swap video I’ve seen yet! Thanks for showing all the little details
I used this vid as a reverse tutorial and it worked. Turned a bucket into a bench. Nice video 👍👍👍
Beautiful my brother this video was exactly what I needed. I’m swapping out the lame 99-02 console for this one. I like this one better. Excellent video and well done.
Thanks And glad it helped out 🤙🏼
You still have the lame one your swapping for ?
I would be highly suspect of any GM truck interior panel that WASN'T covered in dog hair. Honestly, I swear they came that way from the factory.
I know right literally every Chevy I’ve owned has had dog hairs 😂
the best detailed console sway on here - thank you so much!
Glad the video was able to help you out!
I am about to do this swap and all i could find were videos of doing the center console to jump seat swap. im not sure why everyone wants the jump seat. i prefer the console look and i never use the jump seat. Thank you for the great tutorial!!!
Yea I’m not a big fan of the jumpseat either but a lot of people seem to choose that over the center console. No problem glad it helped
People like the jump seat because for people like me who are 6’ 7” tall the console hits our knees. I like this video though, very helpful to reverse engineer, as I can’t find a good jump seat install video.
Cool Video, and informative. I wish to do the opposite. take out the console and put in the 40/20/40 jump seat.
I like the center console, I have two 2000 1500 one is bottom line with crank windows the jump seat to me was a waist of time. The other is a lt fully loaded with center console and it looks so much better. Did a good job. Cheers
I agree I probably only used the jump seat a few times if that. Full console for the win 💯
Definitely love the look of the center console better than the jump seat I probably only used it like once keep up the great work brotha 🤘🔥💯👌
Thats what im saying lol. Thanks brotha
Man that looks sweet with the two tone, my dash is the dark gray also, so I'll be looking for the color you installed when I do mine.
Thanks brotha im not a big fan of the 2tone but looking at it now guess it’s not to bad.😄
This is what ive been looking for... now searching for the brackets and glove box parts, thank you so very much great job !
Glad I was able to help
Currently in the process of doing this in my LBZ. Great vid! Much appreciated!
Been wanting to swap out the cup holders/console on my 99 for a while. Hoping I can do the same thing and everything matches up correctly.
Exactly what I want to do to my 05 Tahoe. Thanks for the video
Glad you liked it
Best tutorial video i found
looks way cleaner ... before after like night and day
I like the two-tone dash! Nice work!
That's looks good! Make sure to put an alarm on the truck too
Thanks man and yeah it has an alarm along with a couple of different kill switches steering wheel lock and it also stays behind a locked gate with cameras and all LOL. And when I do take it out I make sure I’m always close to it lol. Sounds like overkill but u have to take care of you’re investment.
@@differentgarageprojects5656 yeah me too wherever I go I park where I can see it and I never take it to Walmart lol.
The two tone looks great 👍 nice job
Nicely done amigo looks great 👍
Bro that two tone is so sexy I did the same in my duramax just now thank you so much
Apriciate it brotha! Glad the vid helped 🤙🏼
@@differentgarageprojects5656 I went and got the parts and they ended up being light grey tan. My whole interior is dark charcoal grey. The headliner is tan. So I went with the bottom half of my dash light grey tan. And it made it pop 100$ fuck the jump seat haha
Best vid just got the center console and this video helped a lot👍🏼
Very helpful video exaclty what i was looking for thank you
Great video. You explained everthing thanks
Glad it helped out 💯
Thanks, needed to know how to get that console out.
Lol main way I can work on my truck is having my little girl in my truck too. Looks good man!
Looks good bro, the light and dark flows 👍🏾
Thanks Brotha! 🤙🏼
Thank you for this video. I've been wanting to do this swap!
Thanks for posting this! Looks great!
Glad it helped 👍🏼
man ive been looking for a video like this for a while thanks helped a lot.
Glad i was able to help brotha.💯🤙🏼
Thanks for posting this video man super helpful!
No problem glad it helped
looks good my gmc is to tone
Looks great!
Do you know what center console will fit 07-13 Silverado , Tahoe , Denali , suburban
Great job my friend
thanks, that is exactly what I'm doing to mine.
Very good job bro
Great video!!
Looks very nice! I have a 2000 gmc sierra if I buy a console do I have to also get the knee panel and a glovebox or will the one that’s already in will work? Thanks!
Where did you buy the center console that you had? And also do you think it will fit on a single cab?
Viejon una pregunta esa consola también se puede poner en una single cab sierrra 2002 claro con sus respectivos plásticos del vehículo donante le comentó porq tengo una y se la quite a una turbo diésel Silverado 2005 y se la quiero poner a mi sierra single cab ya conseguí todos esos plásticos pero me dicen q si otros q no
Si se puede fue lo k yo ise en este video.
I bought one with the 2 trim pieces on each side for 100 bucks. Also has a sub in it. How would I configure the wires to use that sub when I replace it from the Jump seat
That’s not bad at all you can always look up at wiring diagram online or you can install your own speaker and just run the wires off it. Or you can get the whole harness off the truck you got that part from and try to do it that way
@@differentgarageprojects5656 cool! Thanks for the reply !
Very good video man 👍
Clean install!
Do the steering wheel buttons so I can see how you do it
I’m pretty sure you gotta get the gauge cluster that worked with the steering wheel buttons.
Clean job
Will this swap work with a 4 wd shifter in the floor? I see it being in the way. Great job by the way...
So I can do it to my 2003 gmc single cab
Yes
Dope video 🔥🔥
good shit man!
Thanks brotha
Great video I just subscribed to your channel
Thanks for the support brotha
@@differentgarageprojects5656
Your welcome 👍🏽👍🏽👍🏽
Dope
Where can I get the trim pieces?!
Junkyard
Can you do the 04 electric pilot seat i think it will complete the truck
I want to do the opposite with my Suburban. I want to swap my console for a jump seat. I hate the console because it takes up to much room in the cab.
Ok gotcha pretty much just the reverse order of this then.
Awesome video where did you get the bracket from?
Thanks bud. And i got everything from the junkyard
What’s the name of the piece that bolts up to dash from center console and where could I get it?? Amazon?
If you look through the comments i have a comment pinned with the part number.
I bought mine at the junkyard
👍🏽very nice
For the swap do you need change out the bolster? Or can I use the one I have
03-07 you can use the same one
What model and year did this console and all come out of
2005 gmc denali. But they come in many models from 2003 through 2007 classic body style Silverado, sierra, denali, tahoe, yukon, avalanche and suburban
Were you able to power up the radio controls on the center console in the back seat?
I didn’t try to hook them up. I just wanted the full length console.But I’m sure you can get them to work if you get the harness that comes with it.
Will it work without the glove box?
Just bought a 2006 Silverado crew cab , would this be the same process ? Really hate that lil seat lol
Yea I didn’t like it either 😂 and yea same process
does anyone if this works for extended cabs?
Works on single cabs - extended cabs and crewcabs
My 2005 silverado 1500 crew cab has the console your installing. Way better. Mind has a sub in it.
How did you wire up the sub if Yk lmk
Where did you buy all the stuffs ?
I have an 02 and was wondering if u might know if I can upgrade the center console from 03 and up on to it ?
I’m assuming you didn’t watch the video because I mention what parts you need for 99-02
And what you need to modify lol
@@differentgarageprojects5656 I wanted to upgrade the center console from my 02 to an 03 and up
If so how did you wire it up ?
Whats the part number on the black plastic bracket?
Im sure the part number is somewhere in the comments.
I’m seeing this consoles and panels go for 900 dollars I wish lol idk if I can justify that
Have you connected the speaker yet ?
I never connected the speaker.
Where can I find the mounting bracket
You can try looking it up on eBay but it might be pricey try to find it on Google I might be cheaper
Crimps taps are always 100% a BAD idea and will be a future problem to deal with if not an electrical hazard. I cut out Every crimp taps I find and do it the correct way.
You’re absolutely right I ran into a few problems already with the crimp taps. Sometimes my lights would work. Sometimes they would flicker. So I got rid of the crimp taps and fix my problem!
So I cant use the glove box that already comes stock?? Asking bc I cant find the new glove box you got for it
You can use the original glove box but you can’t use the frame around the glove box.
@@differentgarageprojects5656 ooohhh ok. Mind commenting a li k to where u ordered that one. I'm having trouble find it
@@Aries-us9cy i bought everything at a junkyard brotha
@@differentgarageprojects5656 just my luck😂 well thanks for the help man
@@Aries-us9cy yea i know it sucks man lol. I’m sure you can find a part on eBay as long as its for the full length center console. Like the one on the video. Make sure you compare pictures lol
I'm trying to do the exact opposite I want to get rid of my console and it looks like I'll be needing those pieces you took off of your - These still have them are they for sale
Can I buy your Seay you removed???
Sold it the next day.
we are made in HIS image
A good prayer:
I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS.
Romans 10:5/10 ct...❤️k
JESUSisLord!Amen...
Amen..
If you'd like to call someone who cares
83
For
Truth.
bc you don't know when you'll die?
.y r u hesitant..........
...... .. ........
Helpful information I’m thinking the opposite 😅 i would like to remove the center console on my Escalade 2005 to just have space and replace it with refrigerator any thoughts ?
Dope video 🔥🔥
Anybody know if i can do this to my 2001 s10 extended cab??