Woodshop Air Compressor ― Break-In Procedure and Leak Testing

Поділитися
Вставка
  • Опубліковано 16 лис 2024

КОМЕНТАРІ • 8

  • @TrapDoorWoodworks
    @TrapDoorWoodworks  18 годин тому +3

    Compressed Air Links:
    Puma Industrial PK Single Stage Belt Drive Air Compressor, 60-Gallon Vertical Tank - amzn.to/3CuU1iH
    Maxline M7500 Master Kit, 3/4-Inch x 100-Feet - amzn.to/3UYZwvs
    Maxline M7500 Master Kit, 1/2-Inch x 100-Feet - amzn.to/3wW5zsI
    Three Stage Air Drying System & Air Pressure Regulator Modular - amzn.to/4dVuoFV
    PneumaticPlus Water Trap Valve with Automatic Drain - amzn.to/3wQcvaU
    Compressor Auto Drain Valve - amzn.to/4bO2rOs
    Milton S-153 1/4" NPT Lever Style Blow Gun, Single, United States - amzn.to/3U2dMDf
    Milton Safety Exhaust Coupler - amzn.to/3FhrCeY
    Milton ColorFit Coupler & Plug Kit - amzn.to/3UpS6iJ
    Milton 3/8 FPT 2 In ONE Universal Safety Exhaust Coupler - amzn.to/4fPrtP5
    3/8 NPT to 1/4 OD Push to Connect Fitting - amzn.to/4dsz4Dc
    Brass 1/2 in. x 1/4 in Reducing Tee - amzn.to/3UIGCZL
    Brass 1/2" NPT Street Elbow - amzn.to/4akPXN1
    Maxline Straight Fitting for 3/4-Inch Tubing with 1/2-Inch Male NPT Thread - amzn.to/4blBkdO
    Maxline 3/4" Line Cap - amzn.to/4aGjPUg
    Maxline Elbow Fitting for 3/4-Inch Tubing - amzn.to/4aa8Wuz
    MaxLine 3/4" Compressed Air Tubing 50 ft. Roll - amzn.to/3ViN23a
    MaxLine 3/4" Compressed Air Tubing 25 ft. Roll - amzn.to/3KlmMPn
    MaxLine 3/4" Union Fitting for RapidAir Maxline 3/4 Inch Tubing - amzn.to/4bzmNv3
    Pipe Clip Plastic Tubing Clamp for 3/4"(25mm OD) Tubing 20PCS - amzn.to/3vo4Css
    Anti-Vibration Pads - amzn.to/450J4Qe
    Hockey Puck, Black - 4 Pack - amzn.to/4bWrWgN
    Brass T-Fittings - amzn.to/3UZrF5A

  • @RobertRalphR
    @RobertRalphR 17 годин тому +3

    I feel your pain! Way back in my early working days I worked in a factory that had a leak in their compressed air somewhere, and as the new guy, it was up to me to find it. I spent the entire day soaping filthy dusty joints sixteen feet up on a ladder, and finally found the leak at the end of the day at the easiest place to test. It was the air chuck at the end of the run. 🥴🤣

  • @adenvet2830
    @adenvet2830 22 години тому +3

    Hi Mojo a nice video looks like the tape came to the rescue great job. I watch the Paul v Tyson fight well if you could even call it a fight it was painful to watch.

    • @TrapDoorWoodworks
      @TrapDoorWoodworks  17 годин тому +2

      Thanks Larry! Way more leaks than I wanted, but it was actually what I expected. As I said, the really small pinhole leaks will actually seal themselves eventually, and the rest are now good-to-go! We got rid of Netflix long ago and did not see the fight, but I watched every Tyson fight back in his heyday, and knew he would win. I actually like both fighters though 😊

    • @adenvet2830
      @adenvet2830 17 годин тому

      @TrapDoorWoodworks Paul easily won the fight but I don't even think he was trying.

  • @NewWoodGuy
    @NewWoodGuy 17 годин тому +2

    I use a much smaller compressor, and just attach a hose when needed, but have been thinking of attaching the rubber hose over to the furthest area. Do you foresee any problems?

    • @TrapDoorWoodworks
      @TrapDoorWoodworks  17 годин тому +1

      In my last couple of shops, I ran rubber hose as air lines throughout the shop. I connected the hose with hose barbs and hose clamps. It works just fine for a limited amount of air. The typical rubber hose is 3/8" ID and this pipe is 3/4" ID 3/4" ID is actually four times as large as the 3/8" hose! The hose does work though for jigs and blowing stuff off. For better air flow, make sure you install a loop system like I am doing. Good luck!

    • @docghines
      @docghines 14 годин тому

      I ran hoses to three different places in my shop and have never had any problems with them.