How To Install A Closet Rod And Shelf
Вставка
- Опубліковано 2 жов 2024
- No more shelves or a clothing rod that bends. No more shelves that rip out of the wall. Learn how to install a shelf and clothing rod in your closet.
Here are some of the tools that jimthecarguy uses
www.amazon.com...
Due to factors beyond the control of get it done home repair, it cannot guarantee against unauthorized modifications of this information,.get it done home repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. get it done home repair safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of get it done home repair no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not get it done home repair.
Perfect! Exactly what I was looking for to hang clothes in my laundry room and add storage. Great instructions!
Glad it was helpful!
THANK YOU × 10... This exactly what I needed to know in order to reinforce a closet rod💖
Glad it was helpful!
Excellent. The house that I just moved into has those wire shelves that are on different levels in the closet and as far as I am concerned useless. This is just what I need, off to the hardware store. Thanks.
I'm happy to help.Thanks for watching.
I want to thank the creator for making an easy to follow video on this. My father passed before he was able to teach me everything I needed to know about making a house a home and our wire closet has collapsed twice now! Thank you ❤
Glad it helped
Thanks for this video can’t wait to do this to both of my closets!
thank you! youre so so helpful, can't wait to use these tips when i move at the end of the week
Good luck!!
Suggestions, paint the wood before installation . . . if you put a shelf in, make sure you position the rod such that allows enough room for clothes hangers to go on and off with ease . . . good video thanks
Thanks for the good advice. You would need room between shelf and hangers.
How much room would you say to have?
That’s great wisdom. You don’t want to be finishing the material post mounting.
@@tjkong4381 1 1/2” -2” should work.
Vanesss del rio
The wardrobe trunk is simple but a little tricky. for some reason, many people, myself included, installed it unbalancedly.
Great information, but here’s an embarrassing question 😀-
How do I add a shorter rod/section for dresses? know I’ve seen this done, but I don’t know how to attach the “dividing board” to the wall behind it? Would I use the same concept you used here (attach the vertical dividing board to a horizontal section that was previously attached to the wall)?
A design like this-
Divider Rod for. .
Rod #1. Board. Dresses. Wall
--------l---------------l
Rod #2. I. I
--------I. Dresses. I
I
-----------------------
Floor
No fuss. Glad I found you.
What an Excellent and a fluid instruction! Im guessing the boards used were pine 1" by 4". I hope so. That's what I'm buying. Thanks.
0.75 speed and you sound exactly like jeff goldbloom! thanks for the video :)
Interesting!
You’re a master at this 👏🏼👏🏼👏🏼👏🏼👏🏼
Glad it helped!
Jim's dream house! THANK You Jim ! 🙂
Our pleasure!
So helpful! Thank you so much for posting this!
You're so welcome!
Thank you for making this easy to understand for a non handy person.😊
Great video! Your step by step instructions are just what I needed for my project. Thank you! gina
Glad it was helpful! Nice job Gina
Great informative video. This' just what I was looking for. My whole closet collapsed; rod and shelf. I'm motivated now to get started. Thanks. p.s. I first saw one of your CRV videos for replacing brake bulb lights .
Glad it was helpful! Thanks for watching both
Thankyou for your video. I had problems finding the stud along the wall and your tip to drill on an angle saved me. Just completed two rod installs.
Simply the Best.
Thanks for watching. Don't forget to sub.
Very informative. Thank you
is it wise to use PL glue ?to put in the wood before screw into the drywall?
Thanks. Drilling screws to sides makes sense. One tip, the space for hangers is too narrow (between rod and shelf lip). I would suggest adding 3" to top if you are going to have a shelf going across.
What do you do when no studs are possible even in the corners? I'm working with a closet that is breaking my brain, as it seems to have boards on the sides just nailed into the hollow drywall. No corner studs. No anchors. But it has held up for almost 40 years?! I just need to install more shelves and I have no idea how the old boards are secured to the wall properly.
I would say that if it has been up for 40 years it must be nailed or screwed into a stud somewhere.
@@getitdonehomerepair I am close to getting a portable x-ray machine to see what the heck is going on. I put super thin nails into the wall at every point where the existing boards have nails, and there are no studs. The only place it might be nailed into studs are the back 2 corners, because the fronts of the boards don't extend all the way to the opening where another frame would be.
Too funny!
How do you identify where the beams and studs are to secure the wood with a drywall screw for the shelve to go on top?
You will need to use a stud finder. Take a look in my Amazon store below the video to see what they look like,
Well..the only question I had is how far from the back wall to the vent or end of the poll socket..and I didn’t get an answer 🤷🏼♂️
Love it what size of wood is that so I can know what to buy
The shelf is 3/4 inch x 12 inch pine and the supports are 3/4 x 3 or 4 inches.
Great hack. I watched your video early this morning, and was done by late morning. It is solid and practical. Thank you
I'm happy to help.Thanks for watching.
Cool 😎 👍helpful thanks 😊
But man, life is so much easier with an impact driver 💪 try it. Old school.....doing stuff right👌💪 💪
How do we know if there will be a beer behind the wood?
Thank you! I have watched a lot of videos and this one explained some details that others did not.
Glad it was helpful!
Great video!! Thank you!!! How do you recommend supporting the middle of the rod?
Look up Adjustable Shelf Bracket and Rod Support
Another ? What color should paint the wood. White, color of wall.
That is personal preference.
Are these 1x4? Or 2x4?
They are 3/4" by 4 ".Thanks for watching.
Technically, I would call the vertical stud(s), instead of beam behind the dry wall.
Thanks for your input . You are correct they are studs. Thanks for watching.
Thank you! I was happy that you answered why you went in at an angle for the screws, you read my mind!
Great instructions and make it look very doable for the regular schmuck like me thank you.
Glad you liked it
I have a closet that is 8 feet wide. If I want to put a shelf across it, will installing these beams on 3 sides be enough to support it? Or should I put some kind of support in the middle?
Thanks for watching.
Ok, when you’re first drilling a hole to be at an angle, filet drill straight down at a 90degree angle, then slowly rotate the drill bit to go in the angle you’re desiring. Much easier! And why on earth are you spilling the drill, of you don’t want fast, the just go slow and steady, this bump bump bump will kill your drill.
.
If there is no stud to screw the board into, can I use a wall anchor?
Yes you can but it will not hold as well as if you screw into the studs. You should have studs in the corners.
I like how you explain everything. Thank you. This is exactly what I needed to know!
Glad it was helpful!
Thanks for your straightforward tutorial on how to hang a closet hanging rod and shelf
Glad it was helpful!
Thanks for answering all the questions. Very informative video. Love your new Yorker accent 😊
So nice of you
How to do this with metel studs?
You will need to pre drill the studs first and then install the screws.Thanks for watching.
Why are you using drywall screws?
Drywall screws work perfectly on this. Thanks for watching.
thank you youtubers for making our lives easier
Happy to help!
Can I ask you what a handyman would charge to do this exact thing? Approximately. Thank you!
Great video! How long should the screws be that are securing the pole holders in the 2x4? I'm assuming less than 2" so it doesn't go all the way through the 2x4 to the wall behind?
Yes 1.5-2 inches.Thanks for watching.
What's size is the rod
Is he screwing it in at an angle?
Yes the screw in the corner go in at an angle . That way you can screw into the studs.
At time stamp 7:54, you skipped over measuring to make sure the rod is low enough from the shelf that you get the hanger out and rod is far enough from back of closet the hanger will hang straight
Thanks for watching
If rod falls down and need to replace socket, how do you get the rod to fit again since the rod will be too long until the socket is screwed in and cannot screw in the socket after placing rod in it? Without cutting. Thanks!
Can you send me a picture of the problem?
Thank you very much for sharing your tutorial videos. Your video on swapping out a pedestal sink for a vanity guided me. I was wondering if I can use 3/4 x 4 cedar board if I can't get my hands on pine? Thank you.
question sir. so my closet has left side dry wall right side is brick. main wall for the center board has no stud because behind the wall is brick maybe 6 inches from it. weird structure of a house. but what would be good supports i DO NOT want the middle of the board bending over time because of lack of support.
This was such a Great tutorial! I wish you could come to my house in Jersey! But, I'm gonna try it on my own, wish me luck!
You can do it!
Thank you for such a thorough video. Kudos to your camera person as well!
Thanks for watching!
What were the measurements for the wood pieces that you used including the shelf 1 ×4 ?
I like it but its so complicated especially in the beginning but its a good thought and critical information
I'm happy to help.Thanks for watching.
No need for screws. Just 2.5 inch finish nails out of your 16 gauge nail gun
How many inches from the wall the rod usually go?🎉
This is exactly what I need, TY for sharing!
He answered the ?. Where the beam is prob located.
In the corner. You can buy a stud finder to locate the studs.
Thank you for putting thi together. It is of immense benefit to me. E seun pupo😊😊👍👍
Thank You for a great instruction. I will try and will let you know how good I follow the instructions.
When working in poor lighted areas next time provide better lighting, especially if your going to be making vlogs
I have a question. I made an assembly just as you did. I used a metal rod with a shelf and the support brackets on each side. But I also put 2 support brackets in the middle of the wall, do I really need the brackets in the middle?
If the rod and shelf are long it is a good idea to have at least one support
Awesome thanks for sharing this video, but now I just need willpower to do it. Love it!
You can do it!
Does the cleat size matter. I am redoing my sons closet. And saved the cleats. But was hoping I could cut them length wise to be 1.5 to 2 inches vs the 5.5 inches it it’s in thickness
Yes you can cut them down but I would make them at least 2-2.5 inches. Thanks for watching.
What is the purpose of angling the screws down? I noticed in the beginning of this video the first few screws were angled down just wondered why. Thank you!
Actually the were angled so that they would be sure to screw into the wall/closet studs. Good question.
Can I just use the butterfly on place of the wood
Thank you so much for sharing such an excellent video! Exactly what we needed in our basement remodel.
Glad it was helpful!
Great video, but my only question is: how do you install the shelf on top? Do you use wood glue or do you screw/nail it to the wood below?
Actually the shelf just lays on top. Good question.
Plastic Anchors can hold up to 75 pounds. Why not just use anchors?
Doing it like this they will never pull out .I have seen those plastic anchors over time loosen up and pull out.
because as soon as you put 76 lbs on the rod everything will come falling down..
So why are you watching the video if you know the "better" way of doing it?? Just asking
I love this video! Can I ask you when the brackets would come into place? We are going to do this in a really long walk in closet. Can you give me some suggestions for that?
I think by saying “beam” you mean stud?
What do you think?
Yes you are correct.Thanks for watching.
I noticed you never used drywall anchors. Would it be stronger if I used anchors or it wouldn’t make a difference?
Good question. Drywall anchors are ok for light duty but screwing directly into the wood that is screwed into a stud is stronger.
I wished you would've shown how to measure the rod placement in order to put up the sockets evenly..everyone cuts that out..why??
Thanks for watching.
Very well explained SUSCRIBED!!
Welcome aboard!
What is the size of the wood ?
3/4 x 12 inch pine for the shelf and 3/4 x 3 inch for the support
thanks so much!!
Would a pocket hole jig also work for the angled nails?
Ye it may work.
What type of wood is used?
Just pine will do.
Wow. Very creative of you.
Big help thank you
Would you paint the boards before screwing into the wall?
That is personal preference but it would be easier to paint before you install it. Thanks for watching. Don't forget to sub.
Great tip, thanks for posting.
Thank you!!! I thought I had to use additional sockets. This was so helpful❤
Glad it was helpful!
Thank you!!! I thought I had to use additional sockets. This was so helpful❤
Glad it was helpful!
Won’t the rod start to bow at some point in time?
The metal one is less likely to bend as a wooden one will.
Is it possible to use drywall anchors that hold significant amount or weight for the rod?
It may hold for a short time but not permanently.
This is exactly what I needed!! Thank you!!!
Glad it was helpful!
Great tutorial 👌🏾 thanks!
Glad it was helpful!
Excellent video. Is that a 2x6?
No actually it is 3/4 by 3 or 4 inches. Good question.
Very informative! I truly think that I can tackle this project!
You can do it!
I like this
Thanks for watching.
I'm going to do it .
Great video, very detailed thank ya . I'm from Maine , saw it on the hat and got excited 😁
Awesome! Thank you! I love Maine I'm up there every few months.
What size drill bit do you use?
About 1/16 - 1/8
Great Video.. Short, Sweet, And To The Point!
Glad you enjoyed it!
What thickness is the wood support?
The wood is 3-4 inches