Watched your video and find solutions to all my questions. I haven't started my project yet because I wanted all my ducks in a row. Thank you for your great ideas. I will let you know jow it turns out.
Very very cool so glad our video helped you out. Thank you for this amazing comment and please let us know how your build goes. As well during the process if you have any questions let us know. Thanks for watching and good luck on your project👍👍😎
This video proved the skills and knowledge to encourage me to remodel my closet. Ugly wire racks put in by previous homeowner fell out of the wall.. not one bracket was secured into wall studs... I gut the closet and did board and Bataan design.. I use wooden dowels to hold hanging clothing... built shelf to hold shoes.. I am beyond happy with results.. btw, I am in my sixties and used table saw, hammer drill, and level... now off to my next closet project.
Wow Cheryl that was such an amazing comment thank you for that. That’s exactly why we make these videos we are so happy we could be of help to you so awesome thank you again for sharing that amazing comment and supporting our channel😎👍🏻🔨
After 30 some odd years in the construction business you get where you can make just about anything. Sometimes this means you do things more elaborate than really is needed. I was looking at videos wasting some time when I ran across yours. I really like the Simplicity of your closet shelves and your videos was clean and professional as well. Just thought I would chime in and let you know that I enjoyed it.
With your video I did our closet organizer today. Thank you, your video helped me a tremendous amount. 13 feet long, 8 feet high, shelves on both sides. I had no idea but was able to buy the right stuff, and install it adequately using your video. It’s not as good as you do but we are very happy. Thank you.
Just bought my first house and it has little closet space going to take one of the rooms and make it my walk-in! This was by far the best video I watched! Thanks for the great info and direction!
This is awesome. Finally, someone who makes things with Hand power tools. This way we don't have to invest $100,000 in tools like those guys who mean well, but try to make the video look like DIY. Thank you for the video. 5:47
Very neat and well explained. I'm trying to decide between lam wood or that wire shelf system.. Little window in that closet is real nice. Little natural light goes a long ways.
We like the wood system. There are some really awesome closet systems you can get with so many options. All good depends on your needs. Ya we love the natural light in the closet it is really nice. Thanks for the comment 👍🏻😎🔨
What I did is I coped the end of the dowel that attaches to the support on either side. Then I drilled a pilot hole and countersunk 3-1/2 screws from the supporting Dowels on each side also used glue. I hope that helps I did not film a video doing that maybe I will next time. Thanks for the comment. 😎🔨
Great video. Thank you. If you were to stain the wood, would you stain it in place after installation? Or build id and then dismantle it to stain? Thanks again.
Can you make a specific video on how to connect pole To pole Dow , because that’s not visible on this video , how did you connect them at 90 degrees and with the radius being so less obvious
@@co-know-proconstructiontips One last question. I am just about to start. What height did you use for ledger line. I am trying to determine my shelf height. Your videos are great by the way. Thanks.
@@johnathanasoulias5347 the ledger is about 69 inches off finish floor that would be to the bottom of your shelf. keep in mind the ceilings on this build or about 102 inches little over 8 feet tall so if you have a lower ceiling, you might want to bring your ledger down depending on what you’re putting up on the shelf. Hope that helps 👍😎
great video and this is exactly what i a looking for. My question is how much material do i need , how do i figure that out, i get confused with corners ....I have a rectangular walk in closet, 146.5 inches by 79 wide. What material do i need for one shelf on the 146.5 wall. Can you share with me dimensions on wood and nail sizes... Appreciate your work!
Thank you for that comment. Definitely you will need a minimum 12 foot one by 12 Douglas fir or pine. You will also need one by three by approximately 16 foot for your ledger. Then you’ll need approximately three closet brackets. Then you will also need one bag of closet hardware for the Rod to sit in on walls. Then you will need 2 1/2 inch Brad nails 15 gauge. You will also need a 15 gauge Brad nail gun. You can use a smaller gauge nail if you use screws after you nail it together. If so use at least 2 1/2 inch screws. You will also need a 12 foot wood rod or dowel. That is about all you need plus the tools to build it then primer and paint hope that helps. Happy new year 🎆
Great presentation. Your approach is much appreciated. 1 suggestion, wear safety glasses... you only have one set of eyes, protect them... you never know when a splinter of a drill bit snap can bland you...
So glad it was helpful to you. The closet is 6‘6“ wide by 12 foot long. So after the shelves are installed I had a little over 4 feet in the middle. Thanks for the comment support hope that helps. 👍🏻😎🔨
i do have a question for ya but great video! really like this closet re-do. my question is what is the purpose of the short 1x3 pieces you under nailed to the shelf for (the ones with the 45 degree reveal cut into the inboard end)? initially i thought they were for spacing down the support bracket for the dowels you used for the rod and still gave support to the shelf but that's not what i saw in the end.
Great question Sean👍🏻 The one by three with the 45 on the edge is where I spliced my shelves together that is were each shelf butts into the next shelf. I nail those underneath each seem to give additional support. Thanks for the question🔨👍🏻😎
I've been searching all of UA-cam and I cannot figure how you support your back peice shelf that goes between the two longer wall shelves at approximately 5:56 can you enlightening me?
Basically the shelving attaches to that back ledger on the back wall which gives it most of the support as well as it attaches to the two side shelves by toenailing with a 15 gauge nail gun through the face of the shelf into the shelf adjoining it on each side. That is a good strong connection once painted should last a long time. But if not you can add a piece of wood below the seam a one by to keep the joints secure. As well are brackets that support our shelves and our dowels are pretty close at that back wall which gives a lot of support to that part of the shelf as well. You can as well put one of the closet brackets in the center of that back shelf against the back wall that will support the shelf and the dowel on that back wall really well and you can put a lot of weight on it. We hope that helps you get a better picture of that work. Thanks for watching check out some of our other videos we have a lot of awesome content don’t forget to subscribe and like have a good one. 👍😎
Hey man great video. Thanks for this. I don't understand though how you notched the dowl for the back wall into the left and right dowl? What sort of cut did you make into the left and right dowl to receive the back wall dowl so cleanly?
Thanks man. I laid the smaller Dowel down on the ground then I brought a small piece of cut dowel up to the edge of it and placed it on the side of the Dowel and I scribed the angle of the side down onto the middle dowel. Then I used a hand hacksaw to cut out that radius. Once I have the radius on each end of the Dowel placed it next to the right and left dowel and then countersunk from the backside of the right and left dowels and I installed a 3 1/2 inch deck rated screw. When cutting that radius it’s on the end cut so you want to lock it into a clamp make sure it’s really secure then cut that radius. I hope that makes sense maybe I’ll do a short video on it thanks for watching and the comment. 👍🏻😎🔨
@@co-know-proconstructiontips Ok so what's the secret to getting the wood joints nice tight? Im building the closet now. I'm finding that cutting the shelves to 90 degrees doesnt fit nice and tight. There are gaps at the corners of the walls. I went and bought an angle finder which helps but its still not perfect. What's your process for getting the perfect cut?
Well there’s a couple different tricks you can do. You can measure the gap thickness at its widest point and then go to the opposite side of your board and measure the thickness mark a line then go to zero on your cut should find the angle. Try it with the smaller piece of wood first find your angle then transfer that to your finish board so you don’t make the wrong cut on your finish piece. Let me know if that helps. 👍🏻😎🔨
Awesome! thank you and glad you like it. Yes it’s a 1 x 3 with the corners cut off at a 45° angle to give character. Let us know if you have any other questions. Thanks for watching👍😎
so 4 months later I come back to this video! Question...I couldn't tell or read the brand of your stud finder. Could you please tell me? I bought a fancy Zircon one and even though I calibrate it, it sucks. I'm trusting you on this. Thx!
You can purchase a high powered magnet and use it to find the screws in the studs on your wall that is the best stud finder. The one I show in the video is just a magnet stud finder the brand name is C.H. Hansen company. You can get a magnet from a hardware store. It will work if you have standard drywall. If You have lath and plaster stud finder‘s typically don’t work. Thanks for watching 🔨👍🏻
Thanks James, I left the brackets on well i panted. What i do is i keep a damp rag in my pocket so if i get some pant on the bracket i wipe it off and good to go.. Good question have a good one :-}
At 5:30ish minutes, what exactly are you using to nail down the shelves on top of the support ledger/brackets? You mention in the video that you're "tacking it all in." What are you using to do just that?
Great question 16 gauge is good you can reinforce with some screws after you’re done with the build as well. The face screen molding on the front of the 1x12 shelving we used a 18 gauge with three-quarter inch brass nails and glue. 16 16 gauge might split that peace. You don’t have to install the face screen molding it’s just to give the one by 12 a nicer edge. You can buy some 1 inch finish nails and hand drive them into the face of the screen molding may need to pilot with a little drill bit. Other than that you should be good to go with the 16 gauge gun. Thanks for watching and the comet let us know if you need anything else
I got the 18 gauge nails and gun. Just the big gun only goes to 16 gauge. Just wanted to make sure that if I use 16 gauge for the 15 gauge you used in the video would be ok as well.
Definitely will work like I say may have to countersink a few screws next to some of the 16 gauge nails you install but should hold really good. Thanks for watching
Hey brother. Great video. Doing a pantry this week, same idea. Do you think you need the brackets for weight support or would the leger board be enough?
Hi Gin don't have any yet but ass soon as we do ill post it. We have done them in the past but did not make a vid at the time but will next time. Thanks for the comment good luck on your build het me up if you have questions Gin!!!!
is all the weight of the clothing on the hangars supported by those metal brackets? I can't have my rods supported by any walls. I wasn't sure if that would be possible but maybe it is. nvm saw how it is supported by brackets in the back. Can I do this without having a bracket to the wall? Just those metal holders and wood shelving screwed into studs?
Great question! I personally wouldn’t attach this wood shelf system to a concrete wall I would get a steel system. You can attach it to a concrete wall if you’d like but you want to make sure the wall is sealed first so no moisture Fenwick through the concrete to your shelf system. As well I recommend using pre-primed product or treated product if it’s going up against any kind of cement or concrete. If it’s just a brick wall that gets painted, then you can install anchors to attach the ledger to the wall, then build everything the same that I did here With some few modifications, as far as screw size holding the brackets, those can only be the thickness of the wood you are attaching to the wall. So if you’re going to attach it to the wall you’re going to want to use concrete anchors, there are many different types. I recommend trying a anchor out first making sure it’s gonna hold properly for you before you attach your full ledger to the wall. But check out some steel systems may work better for you. If not, good luck hope that helps you. 👍
Great job again! Looks like the closet was about 4ft wide x 10ft long? I'm currently building out a master closet and wondering if I should do about the same dimensions with this hanger setup.
If you are nailing through five eights drywall and are using a three-quarter inch piece of wood that is about an 1-3/8 thickness with another 1/2 inch going into your stud that’s 1-7/8 nails you can use 1-3/4 you should clear any pipes or electrical going threw the studs if electrical and plumbing was done per code you should be ok. But you definitely have to nail into studs only. I hope that helps you and is clear enough good luck with your project. 🔨👍🏻
If you have lath and plaster walls that would work. If you have a regular drywall I wouldn’t use a screw longer than two inch. Or 15 gauge galvanized nails.
Great video. Very helpful! When you're putting the brackets in on the left side, I see some play in the shelf. If I'm wanting to just have shelves for an office closet with no hanger rods, what would you recommend to make sure it can support a significant amount of weight and not have the hanger brackets?
Watched your video and find solutions to all my questions. I haven't started my project yet because I wanted all my ducks in a row. Thank you for your great ideas. I will let you know jow it turns out.
Very very cool so glad our video helped you out. Thank you for this amazing comment and please let us know how your build goes. As well during the process if you have any questions let us know. Thanks for watching and good luck on your project👍👍😎
This video proved the skills and knowledge to encourage me to remodel my closet. Ugly wire racks put in by previous homeowner fell out of the wall.. not one bracket was secured into wall studs... I gut the closet and did board and Bataan design.. I use wooden dowels to hold hanging clothing... built shelf to hold shoes.. I am beyond happy with results.. btw, I am in my sixties and used table saw, hammer drill, and level... now off to my next closet project.
Wow Cheryl that was such an amazing comment thank you for that. That’s exactly why we make these videos we are so happy we could be of help to you so awesome thank you again for sharing that amazing comment and supporting our channel😎👍🏻🔨
After 30 some odd years in the construction business you get where you can make just about anything. Sometimes this means you do things more elaborate than really is needed. I was looking at videos wasting some time when I ran across yours. I really like the Simplicity of your closet shelves and your videos was clean and professional as well. Just thought I would chime in and let you know that I enjoyed it.
Thank you for that really nice comment!
That means a lot to us Thomas thank you again sir👍👍👍😎
I second this ☝🏻 thanks for the great video on a simple closet shelf system 🤜🏻🤛🏻
It is the craft in the craftsman that creates excellence. Well done!
I learned a lot!
Thank you so much for the awesome and very kind comment. Appreciate you 👍😊
With your video I did our closet organizer today. Thank you, your video helped me a tremendous amount. 13 feet long, 8 feet high, shelves on both sides. I had no idea but was able to buy the right stuff, and install it adequately using your video. It’s not as good as you do but we are very happy. Thank you.
So glad our video helped you out. You are very welcome. So awesome 👏 Thanks so much for watching. 👍🏻😎🔨
Just bought my first house and it has little closet space going to take one of the rooms and make it my walk-in! This was by far the best video I watched! Thanks for the great info and direction!
I’m doing the same… how did yours come out? Any tips?
This is exactly the how-to I needed as we put shelves/rods in our 12 foot closet. Simple, beautiful, maximum hanging space.
Awesome that is so cool👍😎
Love this and the supportive knowledge of power at the end 🎉great
So glad you like the video, thank you for the kind comment 👍😊
@@co-know-proconstructiontips you welcome 😊🙌🏼🙌🏼
I really like that. I contractor but I'm 60 and I'm looking to improve my handyman skill, especially with closets
I could watch you work all day. You are very precise and that is super satisfying to watch.
Great video, very helpful...thanks!
I'm a first time new construction homeowner. thanks for explaining basic closet building!
Very welcome!
Great video thanks for shearing
Thank you for all the tips you shared on creating a walk in closet it really came in handy.
You are so welcome!
I love the way you explain your projects so well its ez to understand it
Awesome
This is awesome. Finally, someone who makes things with Hand power tools. This way we don't have to invest $100,000 in tools like those guys who mean well, but try to make the video look like DIY. Thank you for the video. 5:47
Making a T rod video , deserves a video itself , since nothing on UA-cam talks about it
Poplar is the other hardwood not "popular". Thanks for uploading. Picked up some good tips.
Thanks for the info!
you made the video well! very easy to understand!! Going to start my first project now! Thanks for the video!
Best of luck!
Great video with some detailed explanations!
Thanks for watching 👍
Nice job!
Thank you very much! Thanks for watching 👍😎
Nice work
Great work!
Thanks for the visit
I did it myself with the Woodglut plans. I think this is the best way to find out how to build it.
Doubt it
@@co-know-proconstructiontips 👍
My closet looks like this 🤣🤣🤣 at least I'm not alone lol 👏👏👏👏 love it
Mine too, that’s who I’m doing a remodel 😩
Looking to redo my walk-in, wonder job!
Thanks Dennis 👍😎
Beautiful craftsmanship! WoW!!
Thank you very much!
Beautiful work bro.
Thanks bro we appreciate that. 😎👍🔨
Very nice job and good explanation, thanks for sharing with us 👍❤️
Excellent video sir!
Thank you sir very much 👍😎
Thank you very much for this video. I was able to incorporate how you did this with my closet and it looks awesome!
You are so welcome!
Closet is Awesome, do you have a video where you prime and paint closet shelves. so do you leave the metal brackets in place or remove them?
Excellent video! Helped me a lot. Thank you!
Glad it helped Bob! Thanks for the comment and the support to our channel 👍🏻😎
Awesome space!
Great job man. I'm about to undertake this myself, and this vid was very helpful.
Nice job
Very nice. 👍
Turned out awesome iam going to do this in my hobby room
Thank you for the awesome comment 😎
Beautiful Job n Great Commentary 💯💯💯
Thanks so much 🔨😎👍🏻
Great commentary. Very informative.
Bam! There it is!!
Nice job!
Nice work, great to the point video thanks,
Thanks David glad you like the vid 👍🏻🔨😎
good job. nice and clean
Thank you 👍
SIMPLE AND BAD ASS ::: GREAT JOB BRO TY..
Nice! Simple, but maximizes storage space, both for clothes and boxes. Thanks.
Wow. Nice job.
Very neat and well explained. I'm trying to decide between lam wood or that wire shelf system..
Little window in that closet is real nice. Little natural light goes a long ways.
We like the wood system. There are some really awesome closet systems you can get with so many options. All good depends on your needs. Ya we love the natural light in the closet it is really nice. Thanks for the comment 👍🏻😎🔨
Nice job! Can you provide detail of how you join the back closet rod to the side rods?
What I did is I coped the end of the dowel that attaches to the support on either side. Then I drilled a pilot hole and countersunk 3-1/2 screws from the supporting Dowels on each side also used glue. I hope that helps I did not film a video doing that maybe I will next time. Thanks for the comment. 😎🔨
Great work thanks for the knowledge family appreciate what you do.
Thanks for the support Omar!!!
Great video! Can you give more details on how this short segment of the shelf at 5:55 is supported?
Late answer but he screw it in to the wall stud he created and he also uses brackets to hold the shelf up
Great video. Thank you. If you were to stain the wood, would you stain it in place after installation? Or build id and then dismantle it to stain? Thanks again.
I would stain it in place. Thanks for the comment🔨👍🏻
Thanks man, great informative video.
No problem!
You make it look so easy. Nice job
you can use quality pine. It's way cheaper. Less dimensionally stable at 2" but pretty straight at 3".
Great job, I love it. Thanks
Glad you like it!
Love it nice job 👍
Thanks so much 😎👍🏻🔨
Really enjoyed the video,what size is this closet. Excellent job clean and simple.
Awesome! The closet is approximately 6‘6“ wide by 12‘6“ long.
Thanks for the comment and thanks for watching. 😎👍🏻
@@co-know-proconstructiontips sorry to bother you again,are these the inside dimensions our outside Thanks
No worries at all 👍 that is the Inside measurements inside wall to wall before drywall. 👍😎
@@co-know-proconstructiontips Thanks
Did you nail the rod support brackets into a stud? Your work looks awesome. Thanks for the great videos.
itr9788 of course
thanks for the great video. I do not have a brad nailer, would just pre-drill and screws work? thanks
You are very welcome 😊 Great question, Yes absolutely will work 👍 good luck on your build 👍😎
Can you make a specific video on how to connect pole
To pole Dow , because that’s not visible on this video , how did you connect them at 90 degrees and with the radius being so less obvious
Definitely i’ll make a short video just for that rod dowel connection. Look out for it ☝️
Great video. How far apart should brackets be?
Thanks, the brackets are spaced about 4 feet apart 👍
@@co-know-proconstructiontips One last question. I am just about to start. What height did you use for ledger line. I am trying to determine my shelf height. Your videos are great by the way. Thanks.
@@johnathanasoulias5347 the ledger is about 69 inches off finish floor that would be to the bottom of your shelf. keep in mind the ceilings on this build or about 102 inches little over 8 feet tall so if you have a lower ceiling, you might want to bring your ledger down depending on what you’re putting up on the shelf. Hope that helps 👍😎
Your awesome. Thanks again.
great video and this is exactly what i a looking for. My question is how much material do i need , how do i figure that out, i get confused with corners ....I have a rectangular walk in closet, 146.5 inches by 79 wide. What material do i need for one shelf on the 146.5 wall. Can you share with me dimensions on wood and nail sizes... Appreciate your work!
Thank you for that comment. Definitely you will need a minimum 12 foot one by 12 Douglas fir or pine. You will also need one by three by approximately 16 foot for your ledger. Then you’ll need approximately three closet brackets. Then you will also need one bag of closet hardware for the Rod to sit in on walls. Then you will need 2 1/2 inch Brad nails 15 gauge. You will also need a 15 gauge Brad nail gun. You can use a smaller gauge nail if you use screws after you nail it together. If so use at least 2 1/2 inch screws.
You will also need a 12 foot wood rod or dowel. That is about all you need plus the tools to build it then primer and paint hope that helps. Happy new year 🎆
Great presentation. Your approach is much appreciated. 1 suggestion, wear safety glasses... you only have one set of eyes, protect them... you never know when a splinter of a drill bit snap can bland you...
Love the video. The shelf brackets. I saw two types at the hardware store. Do you use standard or heavy duty?
This was extremely helpful!! How wide is your closet?
So glad it was helpful to you. The closet is 6‘6“ wide by 12 foot long. So after the shelves are installed I had a little over 4 feet in the middle. Thanks for the comment support hope that helps. 👍🏻😎🔨
i do have a question for ya but great video! really like this closet re-do. my question is what is the purpose of the short 1x3 pieces you under nailed to the shelf for (the ones with the 45 degree reveal cut into the inboard end)? initially i thought they were for spacing down the support bracket for the dowels you used for the rod and still gave support to the shelf but that's not what i saw in the end.
Great question Sean👍🏻 The one by three with the 45 on the edge is where I spliced my shelves together that is were each shelf butts into the next shelf. I nail those underneath each seem to give additional support. Thanks for the question🔨👍🏻😎
@@co-know-proconstructiontips thanks!
😎👍🏻👍🏻🔨
this is dope man. you killin it with these videos. I'm learning thanks!
Thanks Lennys you made my night with that comment thanks for your support have a good one Lennys!
So helpful.
I've been searching all of UA-cam and I cannot figure how you support your back peice shelf that goes between the two longer wall shelves at approximately 5:56 can you enlightening me?
Basically the shelving attaches to that back ledger on the back wall which gives it most of the support as well as it attaches to the two side shelves by toenailing with a 15 gauge nail gun through the face of the shelf into the shelf adjoining it on each side. That is a good strong connection once painted should last a long time. But if not you can add a piece of wood below the seam a one by to keep the joints secure. As well are brackets that support our shelves and our dowels are pretty close at that back wall which gives a lot of support to that part of the shelf as well.
You can as well put one of the closet brackets in the center of that back shelf against the back wall that will support the shelf and the dowel on that back wall really well and you can put a lot of weight on it.
We hope that helps you get a better picture of that work. Thanks for watching check out some of our other videos we have a lot of awesome content don’t forget to subscribe and like have a good one. 👍😎
I couldn't tell from the video. Are your end to end shelf boards butt joint connected with nails or did you use a lap joint? Good video, thanks!
hey great vid thanks for sharing!
Do you have video on removing a ledge and shelf?
I don’t believe we do, we have a remodel coming up and possibly I can make that video for you. 👍
Great! Thanks, where are you? can you help us to get the closet done? many thanks.
We are from LA. Thanks for the comment.
Hey man great video. Thanks for this. I don't understand though how you notched the dowl for the back wall into the left and right dowl? What sort of cut did you make into the left and right dowl to receive the back wall dowl so cleanly?
Thanks man. I laid the smaller Dowel down on the ground then I brought a small piece of cut dowel up to the edge of it and placed it on the side of the Dowel and I scribed the angle of the side down onto the middle dowel. Then I used a hand hacksaw to cut out that radius. Once I have the radius on each end of the Dowel placed it next to the right and left dowel and then countersunk from the backside of the right and left dowels and I installed a 3 1/2 inch deck rated screw. When cutting that radius it’s on the end cut so you want to lock it into a clamp make sure it’s really secure then cut that radius. I hope that makes sense maybe I’ll do a short video on it thanks for watching and the comment. 👍🏻😎🔨
@@co-know-proconstructiontips Ok so what's the secret to getting the wood joints nice tight? Im building the closet now. I'm finding that cutting the shelves to 90 degrees doesnt fit nice and tight. There are gaps at the corners of the walls. I went and bought an angle finder which helps but its still not perfect. What's your process for getting the perfect cut?
Well there’s a couple different tricks you can do. You can measure the gap thickness at its widest point and then go to the opposite side of your board and measure the thickness mark a line then go to zero on your cut should find the angle. Try it with the smaller piece of wood first find your angle then transfer that to your finish board so you don’t make the wrong cut on your finish piece.
Let me know if that helps.
👍🏻😎🔨
Great video, what size shelf and brackets?
K pirategirl I believe they are 12 in shelf’s and the brackets are a standard size for shelf and poles 👍🏻😎🔨
Love this video!!! I think I can do this!! I have one question for you! Is that also a 1x3 board you used to attach the brackets to?
Awesome! thank you and glad you like it. Yes it’s a 1 x 3 with the corners cut off at a 45° angle to give character. Let us know if you have any other questions. Thanks for watching👍😎
so 4 months later I come back to this video! Question...I couldn't tell or read the brand of your stud finder. Could you please tell me? I bought a fancy Zircon one and even though I calibrate it, it sucks. I'm trusting you on this. Thx!
You can purchase a high powered magnet and use it to find the screws in the studs on your wall that is the best stud finder. The one I show in the video is just a magnet stud finder the brand name is C.H. Hansen company. You can get a magnet from a hardware store. It will work if you have standard drywall. If You have lath and plaster stud finder‘s typically don’t work. Thanks for watching 🔨👍🏻
Great project! I was wondering however, what's the height of your garage ceiling? It looks like 10 ft? 3:56
Hi there it is not a garage it is a bedroom closet. The hight of the celling is 8ft thanks for the comment.
Stellar work!
What’s the purpose of covering the seams with the boards , you said something about channels , would that hold the seams so they don’t bow ?
Yes absolutely 👍 this is the main reason why we do this 👍
Love it!,,,,,been watching your videos when i get a chance nice keep it up,giving me cool ideas for my projects
Right on Nature King thanks for the support :-}
Where is the After video with clothes in it. I would have really liked to see how it was organized
How thick do the ledgers need to be? Great vid btw!
The ledgers are 1by 4 basically 3/4by 3-1/2 thanks for the question.
Nice vid! Very helpful and nice t see the pride you take with your work. When you painted did you remove the brackets or leave them on?
Thanks James, I left the brackets on well i panted. What i do is i keep a damp rag in my pocket so if i get some pant on the bracket i wipe it off and good to go.. Good question have a good one :-}
do you use pan head or tapered head screws for the brackets?
Great question i use pan heads.
At 5:30ish minutes, what exactly are you using to nail down the shelves on top of the support ledger/brackets? You mention in the video that you're "tacking it all in." What are you using to do just that?
That is a 15 gauge Brad nailer I am using 2 inch Brad nails. Hope that helps 👍🏻😎🔨
Nice build!
My gun only takes 16 gauge… will that cause a problem?
Great question 16 gauge is good you can reinforce with some screws after you’re done with the build as well. The face screen molding on the front of the 1x12 shelving we used a 18 gauge with three-quarter inch brass nails and glue. 16 16 gauge might split that peace. You don’t have to install the face screen molding it’s just to give the one by 12 a nicer edge. You can buy some 1 inch finish nails and hand drive them into the face of the screen molding may need to pilot with a little drill bit. Other than that you should be good to go with the 16 gauge gun. Thanks for watching and the comet let us know if you need anything else
I got the 18 gauge nails and gun. Just the big gun only goes to 16 gauge. Just wanted to make sure that if I use 16 gauge for the 15 gauge you used in the video would be ok as well.
Definitely will work like I say may have to countersink a few screws next to some of the 16 gauge nails you install but should hold really good. Thanks for watching
Nice work, thanks for the vid
Hey brother. Great video. Doing a pantry this week, same idea. Do you think you need the brackets for weight support or would the leger board be enough?
Zak Stewart Check out his pantry video just got done watching it pretty cool. He used 45 % supports made out of wood 👍🏻🔨
Level like the sea....
In the Philippines they don't have pine what do you recommend let me know
Molave wood then it’s hard but strong and native to Philippines. They also use pine but it is brought over from Europe 👍
Would the 2 inch 18ga nails works as well?
Hi webeducation, you can us 18ga nails if you do you will need to add some screws counter sunk in to the studs in the wall. good question.
Great video.... I like that way u explained every step....
Thanks Gin for the support check out our other vids and share all you want have a good one Gin!
@@co-know-proconstructiontips , thank u for this video. Do u have any video about basements ? I'd like to start renovating mine ....
Hi Gin don't have any yet but ass soon as we do ill post it. We have done them in the past but did not make a vid at the time but will next time. Thanks for the comment good luck on your build het me up if you have questions Gin!!!!
which nail gun and nail size do you use?
We are using a 15 gauge nail gun with 2-1/2 nails also a 18 gauge with 1-1/2 nails
is all the weight of the clothing on the hangars supported by those metal brackets? I can't have my rods supported by any walls. I wasn't sure if that would be possible but maybe it is. nvm saw how it is supported by brackets in the back. Can I do this without having a bracket to the wall? Just those metal holders and wood shelving screwed into studs?
I’m a little confused on the question?
How you do this project on concrete walls let me know thanks
Great question! I personally wouldn’t attach this wood shelf system to a concrete wall I would get a steel system.
You can attach it to a concrete wall if you’d like but you want to make sure the wall is sealed first so no moisture Fenwick through the concrete to your shelf system. As well I recommend using pre-primed product or treated product if it’s going up against any kind of cement or concrete. If it’s just a brick wall that gets painted, then you can install anchors to attach the ledger to the wall, then build everything the same that I did here
With some few modifications, as far as screw size holding the brackets, those can only be the thickness of the wood you are attaching to the wall. So if you’re going to attach it to the wall you’re going to want to use concrete anchors, there are many different types. I recommend trying a anchor out first making sure it’s gonna hold properly for you before you attach your full ledger to the wall.
But check out some steel systems may work better for you. If not, good luck hope that helps you. 👍
Great job again! Looks like the closet was about 4ft wide x 10ft long? I'm currently building out a master closet and wondering if I should do about the same dimensions with this hanger setup.
What size did you end up doing. I am doing the same. Did the 4x 10 work out?
also...this might be a silly question but how do you avoid puncturing pipes?? I'm afraid I'll do that one day. Thx.
If you are nailing through five eights drywall and are using a three-quarter inch piece of wood that is about an 1-3/8 thickness with another 1/2 inch going into your stud that’s 1-7/8 nails you can use 1-3/4 you should clear any pipes or electrical going threw the studs if electrical and plumbing was done per code you should be ok. But you definitely have to nail into studs only. I hope that helps you and is clear enough good luck with your project. 🔨👍🏻
@@co-know-proconstructiontips I was using XGT deck screws, 2 1/2" for the ledger. No??
If you have lath and plaster walls that would work. If you have a regular drywall I wouldn’t use a screw longer than two inch. Or 15 gauge galvanized nails.
@@co-know-proconstructiontips thanks for your advice!
Absolutely our pleasure. Thanks for watching our vid‘s. Good luck on your build 🔨I’m sure it will come out amazing. 🔨👍🏻😎
Great video. Very helpful! When you're putting the brackets in on the left side, I see some play in the shelf. If I'm wanting to just have shelves for an office closet with no hanger rods, what would you recommend to make sure it can support a significant amount of weight and not have the hanger brackets?
Hi TX great question you can install a 45% support using the 1by 3 ledger material. Install were brackets are thanks for the support have a good one.