smh......use fishing line, not a broom bristle. and do yourself a favor in the future........plastic razor blades and goo gone gel formula.......thank me later
Heemano. Que usar. Para quitar la mancha que queda. Cuando ya se fue el emblema. Pero y el pegamento. Pero me queda todavía como una sombra. Con la marca. Y no se quita
1.Does the alloy edition have the Smokey/light-bronze emblem in rear? 2.For my 2016’s “300S” & “AWD” badging in the rear, can I do the same? Or do they use plugs that go into pre-cut holes??
1.Yes it dose 2. Yes it's the same but if not removed properly you will have to buff out the area we're the logo use to be at or just use rubbing compound simple
@@LA_mostwanted you used the aerosol (aka “graffiti buff”) Goof Off? A light dust off using that isn’t gonna eat my clearcoat too bad as long as I use clay, then wax it proper?
You should be able to . You’re gonna have to take your grill off and the badge should just be clipped on it. Unless its one of those grills where its made as one piece
I can’t wait to remove my badge. Great content🦾
Thanks bro appreciate it🙏🏼
I have a 2011 Chrysler 300, will I have holes? It a 2nd gen one
smh......use fishing line, not a broom bristle. and do yourself a favor in the future........plastic razor blades and goo gone gel formula.......thank me later
Amazing stuff brother quick question was that a blow dryer or heat gun ??
heat gun
My friend,
Is it possible to remove t Chysller logo from the front grille of a Chrysler 300 as well?
Thanks, Brendon, Los Angeles
Can I remove the AWD from the back this way ?
Maaann ive spent a little bit doing this lol, the last little residue is taking forever
I want to do this to my 2017 Chrysler 300 will it have holes under or be like this?
I am wondering the same thing. I have a 2016
What do you use to edit your vids ?
Heemano. Que usar. Para quitar la mancha que queda. Cuando ya se fue el emblema. Pero y el pegamento. Pero me queda todavía como una sombra. Con la marca. Y no se quita
Did you tint your 3rd brake light yourself? Did you have to cut around the camera or did you leave the tint over the camera?
Yes I did it myself I tinted over the camera then cut it out bro
How did you do it without putting cut marks from the blade in your lense
Nice work! Did u VHT night shades the taillights?
No bro its tail light ting I have a vid on it pretty simple its honeycomb stly
@@LA_mostwanted can you see the honeycomb outline with the lights on?
@@gabemartinez1950 my bad bro. yhea you can notice the outline
1.Does the alloy edition have the Smokey/light-bronze emblem in rear?
2.For my 2016’s “300S” & “AWD” badging in the rear, can I do the same? Or do they use plugs that go into pre-cut holes??
1.Yes it dose
2. Yes it's the same but if not removed properly you will have to buff out the area we're the logo use to be at or just use rubbing compound simple
@@LA_mostwanted you used the aerosol (aka “graffiti buff”) Goof Off?
A light dust off using that isn’t gonna eat my clearcoat too bad as long as I use clay, then wax it proper?
@@marcuss4808 yes if you want to do it step by step clay it down then hit it with rubbing compound finally seal it with some wax
@@LA_mostwanted yeah but for the initial hit to clear the hard glue that don’t peel u use real light blast of GoofOff?? (Edit: Ty for response btw)
Thanks for sharing looking... forward to doing the same once it warm up 💯
No problem bro 👊💯
a trick: you can watch movies at flixzone. Been using them for watching a lot of movies lately.
What lip kit is that
Great video! I'm going to do it to mine. Where can I find the can of Goofy Off spray?
Home depot bro
@@LA_mostwanted thanks
What wing is that
What year is yours? Ride is clean bro!
2015 bro thank you👊🏼
Thanks
Senor Pancho the 3 rd 🛸 which 👂is your mobil one troop carrier ?
I don't know what you mean bro ?
Or your asking me about a armored vehicle?
@@LA_mostwanted nevermind, thanx for the video
2019 300s, any video on removing front grill emblem?
No sorry bro best thing to do is to change the grill for the srt style one
@@LA_mostwanted Thank you so much
@@chrisshields1838 ua-cam.com/video/Pez30_ttvrA/v-deo.html
Where did you get your wing or spoiler !!???
amzn.to/3PgQQgT
This is the link for the spoiler bro💯
@@LA_mostwanted thanks bro i appreciated it , sick ass chrysler you have , always keeping it clean and shiny
@@Chakaoscar thank you bro appreciate it and good luck on that install 💯
Hmmm it looks nice both ways. I wish I could remove the front one also
I know u have to replace the grill had it before but got into a accident looked way better
You should be able to . You’re gonna have to take your grill off and the badge should just be clipped on it. Unless its one of those grills where its made as one piece
Try using a dark tint with an exact-o blade or search youtube for “carbon fiber Chrysler 300 emblem”
Is it the same process for first gen Chrysler’s
Yes bro it is
Yes bro it is
Not if you want to leave 2 stupid holes in your trunk lid. Us first gen owners got the shaft and ours is bolted and taped.
Nice intro dog
Thanks bro🙏
I have a 2013 Chrysler srt8 is it the same on mine as well?
how do you put it back on
Double sided 3m tape bro
Pos andale post that vinyl wrap video lol
😂 had some issues with the video but hopeful monday night
Still on the fence about removing mine or blacking it out
Both are good but blacking out the emblem is much easier lol
panch03 # I may just black it out first then
@@skeef_7163 👍