I seriously love that you aren't adding any music to your videos, instead allowing us to only hear the sounds produced as you disassemble. That's the secret sauce right there.
@@megaman874 Well then, Gabby: It's because I'm gonna turns *24 years old* on the next month/April (while my younger brother will be *20 years old* this year...)
as someone who grew up on ps2, seeing him repair it genuinely gives me happiness and gives me hope on people like him not letting nostalgic consoles be forgotten to gather dust.
I'm always impressed that you can not only disassemble these really intricate electronics so delicately, but you even do it around your camera and get these incredible shots. You've helped me gain the confidence to fix my own electronics and I'll be forever grateful to you for it!
@@wakelogger8357 yeah bro, electrocuted with like... 12v. shocks from computers are a mild inconvenience at worst unless you fuck around with the power supply
These chunky old PS2s were beasts... I know this because I have one that is over 20 years old and still works like it did the day I got it for christmas. I was 15. I'll be 36 this year.
I love this version of the PS2 I got one recently at a garage sale and before even powering it up I took it apart and cleaned it well with a air compressor and had not had a problem with it since it's from 2001 go to to show that they don't build them like they used too.
I just purchased a fully working PS2 yesterday on EBay…I’ll be damned if I ever let it get to this state, the sentimental value these things have for us 90’s and 2000’s babies is unparalleled.
I restored a ps2 recently that I found in my wife's parents house. It was hers from when she was a little girl. When I got the ps2 I was in shock. It was much MUCH dirtier than the one shown in this video. I spent a total of 4 hours cleaning every single inch of the ps2. At this point I didn't even know if it would ever work again. Once it was all back together I put gta vice city in, and low and behold..she fired right up. I turned the volume up just to here the startup of the ps2. Ive never felt so nostalgic. To play the game that I probably played the most felt made me feel like a kid again, but old as shit at the same time. Lol
Yeah, I purchased a reconditioned slim version at a retro gaming store in my area. Never letting that thing go. It's had to be worked on a few times, but worth it in my opinion. Retro gaming has become, far and away, my preference.
One thing this makes me appreciate more is how far we've come in terms of hardware. Yes they're still meticulous but god this is one of the most stress inducing tear downs ever.
though it was "simpler" to repair certain consumer electronics years ago. I put simpler in quotes because it was during the capacitor plague and those are usually more visual when the break/pop. So being able to quickly go- yea its that little few dollar part right there with minimal testing was..dope but obviously not the ideal scenario considering it shouldn't break in the first place
It's gonna be my first console teardown so I've been soaking any info up that I can get, I have a couple of fixes to do too, thankfully they're not too bad, I'm not as stressed now that I kinda know the basics, there's plenty of even more complicated consoles out there after all
It's always so interesting to see a piece of electronics that you've only ever seen assembled stripped down piece by piece to see all the components that are required to put together to make something you can recognise. Really makes you appreciate the arterstry needed to make something like the PlayStation 2.
Facts!! It's also amazing to watch restorations of the different generations, and the leaps in technology. The Atari had one tiny board and maybe a dozen screws. The Wii has like 100 screws! And the PS2 is packed with engineering, literally. Several large boards, covered in capacitors, and electronics. I haven't seen inside a PS5 or Series X, but the inside of those things must look like they're from another planet. Reminds me of opening the hood of a 60's car versus a car from today. Both impressive, but the leaps in technology are staggering.
as someone who is usually a quiet subscriber, i’ve been patiently waiting for a restoration video because i really enjoy them. they’re so relaxing and i couldn’t find a better way to wind down after work. so i am very appreciative of this.
Best 24 minutes I spent today :) Replacing the sticker was an unexpected though surprising delight. Your precision and care of camera angles is always appreciated. Your vids are always very satisfying :))))
This world is rapidly passing away and I hope that you repent and take time to change before all out disaster occurs! Belief in messiah alone is not enough to grant you salvation - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36) if you believed in Messiah you would be following His commands as best as you could. If you are not a follower of Messiah I would highly recommend becoming one. Call on the name of Jesus and pray for Him to intervene in your life - Revelation 3:20. Contemplate how the Roman Empire fulfilled the role of the beast from the sea in Revelation 13 over the course of 1260+ years. Revelation 17 confirms that the beast is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years going back to Babylon and before, C) History as we know it is fake. You don't really need to speculate once you start a relationship with God. Can't get a response from God? Fasting can help increase your perception and prayer can help initiate events. God will ignore you if your prayer does not align with His purpose (James 4:3) or if you are approaching Him when "unclean" (Isaiah 1:15, Isaiah 59:2, Micah 3:4). Stop eating food sacrificed to idols (McDonald's, Wendy's etc) stop glorifying yourself on social media or making other images of yourself (Second Commandment), stop gossiping about other people, stop watching obscene content etc. Have a blessed day!
You sir are the gaming system equivalent of The Cleaner in Toy Story 2 who comes to repair and spruce up Woody. Your work is super cool and super satisfying to watch. I get the sense that we have become a society of Replace versus Repair, but you have restored a bit of my faith in humanity. Thank you for all the work you put into your videos! This is easily my new favorite channel.
I did this at the start of the pandemic because of your videos! Mine didn’t have any damage just a lot of dust and something like syrup in a controller port. But it’s so cool to finally see you and the Ducktor take it on too. Thank you for all your great content!!!
I did too but it was my PS3 🤣 I'd never done it before. Took it apart. Putting it back together was the hardest part lol. Luckily I found a food video that helped me assemble mine. It's so satisfying cleaning the dust off lol.
I also wish to do this in the future.. mine’s mostly just dusty however i recently found out it can’t read disks anymore after wishing to play a game in it. so i’m planning on replacing the reader bit so it will work again (it turns on just fine and everything else works it’s just reading the discs that it stalls on)
9:31 The capacitor bit was super enthralling. I learned so much! The circuit board has a plus and minus for correct placement: things I didn't know, that replacing one could be that easy! Am stupidly excited. And that soldering work was smooth as butter. I love your video style, just a white table, black gloves and only the sounds of the project. And friend ducky.
And it's also worth noting: when replacing a capacitor, be sure that the new capacitor has the same capacitance and voltage rating as the old capacitor. So, in this case, he was replacing the 3 broken capacitors on the power board, and those capacitors were rated for 470 microfarads at 25 volts.
Hey! As a fellow tech enthusiast, I appreciate your excitement for the PlayStation 2 restoration video. It's always cool to learn new things about electronics. By the way, have you heard of the HOTO Compressed Air Capsule? It's a handy tool for keeping your tech setup clean and spotless. Check it out!
Don't take it off the board like he did, use the wick BEFORE removing the component. It puts less heat stress on the board and the solder pads that way. Also, it's a lot cleaner and faster.
not a gamer nor have i ever played in a playstation but im an electronics engineer and i watch your videos for the asmr and ideas on restoring old electronics. these videos are mesmerizing!
I came here after watching the cast iron pan restoration, and I've also seen his other restorations. This man is the jack of all trades, master of everything. The companies go to him and ask how much and he says yes. Awesome video!
I can't believe how you always manage to fix these crazy broken machines and items. You make it look so easy, but I'm sure it's taken years of training to get to this level of expertise!
Game consoles are surprisingly easy to repair, especially the older ones. I love watching these videos because they can encourage others to repair something that they may have thought was gone forever
@@specificorb3 I repair electronics for a living, and while vintage game consoles tend to be far simpler than say, apple products. They are by no means easy. There are many many many issues that are common and extremely tricky to diagnose. The fat model PS2 for example has three (sometimes 4) adjustment screws for the optical reader and all of them need to be within range. It's a time eating nightmare, and might not even be the cause of a no disc read.
@@specificorb3 With time perhaps, but not every repair is easy is my point. Three capacitors is simple, but when a system has been dropped with smds burnt off, and a broken digitizer clip, that is not easy. It's a wide range for sure, but a range nonetheless.
Anyone can learn repair, and I think everyone should. It's much better than replacing entirely, but I have an issue with the idea that just because it's old technology that must mean it's easy. It isn't always the case, and I've seen plenty of attempted repair items come into my shop, and a fair bit of time they are damaged beyond repair due to people trying to follow an online guide that gives false information. It happens very frequently.
First time I’m catching one of these. I’m new here from the candy machine and went down the retrobrighting hole with your videos (as well as some other restorations). Just wanted to say thanks so much for making these high quality, relaxing and informative videos :)
i spent so many hours watching my dad play jak and daxter as a kid. still one of my favorite series to this day. id love to get my hands on a another ps2 and a physical copy of j&d someday. great video!
I take my hat off to you! Electronic restoration and repair was something I wanted to get involved in, but life took me down another course. I feel as though I can live vicariously through your videos. Thanks for all your hard work and dedication. (Hector Hoover, name suggestion for your new friend.)
@@shiloc009 I mean he ain't wrong haha I myself tried to study Electrical Engineering after doing IT at highschool, because I always learned some stuff from my dad and I was also always fascinated from all that stuff. Sadly after 2 semesters, it turned out to be way too difficult and I switched back to IT. However, I still managed to fix stuff here and there with the help of some UA-cam videos and definetly some dedication. Best thing my dad and I have done, is to fix a PS4 from my brother-in-law. We both had absolutely no clue what's going on, but with a bit of soldering experience, we ended up doing the math. We couldn't have been any prouder than on that day.
My PS2 has practically suffered the same fate, as in its kicked the bucket to the point where it won't start anymore seeing as how old it's turned now. I was honestly amazed to see this one being revived after so long. I'm currently seeing if I can get mine restored and repaired as well.
@@michaelgasser38 Well played ya, Mikey 😏👍 As for *22 years later* (2022), it's definitely still being a *pride and joy* for someone's fondly remember about it...
Genuinely cried tears of joy when you put Jak and Daxter in. That game was my entire childhood, from the sound of the PS2 startup to the intro of that game. Very good taste!!
Interesting watch as always, but I do have one suggestion. Don't let fans spin when attempting to clean them with compressed air. You don't want this to happen for a couple of reasons: 1) The fan will actually begin to generate a small electrical charge due to the centripetal force the air exposes it to. This can potentially cause a short in your system once reconnected. 2) Air causes the fan to spin at a speed much higher than it is rated for and can damage the fan blades and bearing that allows it to rotate, thus making the fan rattle or fail prematurely. If you used compressed air to clean a fan, you want to keep it from spinning. Something through the blades to block it from moving will work, or some gentle pressure from a finger on the blades. Hope this helps!
This is real, I've a friend that burned around 4 or 5 fans of his computer when cleaning. He was lucky that he had a feeling to not use compressed air on his GPU lol, just broke some cheap fans
Hey, I've been researching some cool tools to optimize my desktop setup and I came across the HOTO Compressed Air Capsule. It offers powerful vacuuming and blowing capabilities, making it perfect for maintaining a spotless environment. The price is reasonable compared to other brands and it has some great features like high-quality filters and multiple tubes. Might be worth checking out!
Your a life saver. My PS2 was clogged up with dust and I was worried about it possibly overheating and catching fire, but now I feel better about it since I was able to clean it thanks to your demonstration.
I fixed and restored this exact model about a year or two ago, definitely one of the easier consoles to clean and repair, although I will say the heatsink and the fan blades look different in this video. Anyways these videos are satisfying to watch, keep up the great content.👍
I think my favorite part of these videos is the attention to small details. You know the sound of an air compressor over a microphone is the same effect as shoving a pencil in your ear, so you modify it in a way to still get the sound across, but in a less damaging way, and with the vacuum you even made it comical without damaging peoples ears.
Thank you very much, i cannot express how much this video helps me while I'm assembling my PS2, it maybe not a perfect tutorial video, but I'm still grateful thank you ver much ❤
I would recommend holding the fan wheel firmly while cleaning. The reason for this is the high speed it reaches due to the compressed air. The bearings are often not designed for this.
Okay I usually scroll past 90% of videos that are 15 min or over because they’re too long, and even the ones I don’t pass don’t get watched all the way, I usually skip around for the good parts. When it came to this video though, I watched the entire thing from beginning to finish without any hesitation. Everything about this video was perfect. The sounds of your work, the timing and verbiage of your captions, your little bits of humor, and even the bonus stuff like the comparison of that building. Bravo my friend bravo.
This probably has to be one of the most satisfying restorations that I've seen in a while. It went from disgusting and caked in grime to looking like it had just been unboxed
Your restorations are just enjoyable to watch. This particullary, not only is a work of art, it also is a throwback to awesome memories and for that sir I say THANK YOU!
I'm always amazed at how good you are at doing this, I could never dream to be able to fix my own consoles that well. I'm afraid mine are eventually going to end up dying.
It's always really interesting seeing all the internals and how they're put together. I recently did a little bit of tear down of my own for the first time when I took apart my old 1060 gpu to replace thermal paste and dust it off, with plenty of reading and video watching to reduce the likelihood of me breaking it. It was really cool to do something like that myself not only successfully but to then see the temperatures under load improve as well.
same here! i got a bonus tho bc i'm the youngest of 5 and my eldest brother was born in '93 so we got to use all of his stuff >:) atari, n64, playstation, xbox, etc. we got our own wii for christmas in '09 and it was our first non-hand-me-down console. best christmas ever second best was my mum finding a sega genesis at DG(????) for $40(?????) an absolute friggin steal she got the game genie, sonic, kid chameleon, and earthworm jim
Thank you so much for all your restoration vids!! So satisfying! I grew up tearing things apart to fix them, now as an adult, they actually work!! things go a certain way, and should work the way they should... Trouble shoot is a a great way to start..! Building big PLC and Motor control panels for the past 30 years helps a bit. I remember tearing apart my 1st Atari as a kid and made it work.. lol...
Dude, the console turns on and gives me major nostalgia. Then, this guy puts THE quintessential PlayStation 2 game into it. I felt like I was in 2003 again.
I bought a PlayStation 2 from Goodwill in the same condition. Because of this video I was able to disassemble the whole thing, clean it and get it back to its rightful condition! Thank you for making these videos!!!
A large paintbrush is a great tool for cleaning. The long bristles get into all the corners really easily and are also soft enough not to mark soft plastics or printing.
Oooh ps2!! Brings back mad memories. Played some great games on it like Metal gear solid, Final fantasy, def jam, soul reaver, Spider-Man, grand tourismo man just to name a few.
Between Star Wars Battle Front, SoCom II Navy Seals Online and Grand Theft Auto III, I spent an unconscionable amount of time in front of my PS2! And I totally loved it! Seeing and hearing that startup screen brought back some fond memories! Thank You!
7:58 Not only wasn't it effective, you also run the risk of breaking the ball bearings on the fan like that. The fan blades are designed for air current running in one direction and the whole axle can bend crooked. If the bearings become off centered, the next time you power up the fan it will sound like an airplane is trying to take off...
@@nemtudom5074 Yikes! I haven't even considered that... Could it mess up your motherboard by feeding back energy or are there built in safeguards against that sort of thing?
@@robdom91 I havent heard of any safeguards being built in. Maybe some of the fan manufacturers give a damn and prevent that, but asi said, i havent heard about there being any....
Same. Mine's been softmodded and running FreeMCBoot since 2010, and I've had an old IDE drive in it since ~2014 to store my games on. That way it's actually possible to play Gran Turismo 4 without disc read errors.
It's been about 2 months now since my dad's suddenly passed away, but your videos always remind me of the type of work he used to do up late :) When I was younger I remember I would go to the kitchen in the middle of the night to get some water and I would just catch him sitting there on the kitchen table with his lamp on working on some type of board soldering, fixing, and melting parts here and there with that hot metal tool of his, I remember he would call me over and I'd watch for a bit before going back to bed it was always so fascinating to see him at work :> I'm almost 20 now and watching these types of videos just bring back good memories with my dad, so thank you Odd Tinkering for always bringing that nostalgic and satisfying work :")
Condolences on the death of your father!!! This hot tool is a soldering station, it's called. A hairdryer is connected to it, which can heat up to 500 degrees Celsius + a soldering iron for boards and all sorts of wires. The soldering station has airflow adjustments for the hair dryer, temperature. Also soldering iron temperature
I love this so much, watching a rusty junky PS2 being cleaned and restored to it's former glory was divinely satisfying to me. The PS2 was my first real game system, with my first PS2 game being Spiderman (the game based on the movie by Sam Raimi), followed by games like Batman Vengeance, Hulk, Pac Man World 2, I could go on and on about the good memories I had from my childhood. What about you guys? What were your first games?
Gran turismo, Jak and Daxter, rachet and clank,madden 06,nhl,nba live, Gran theft auto, resident evil 2,Tenchu, Final Fantasy 10 10-2. NBA street, def Jam New-York,Tony Haws and many more
I seriously love that you aren't adding any music to your videos, instead allowing us to only hear the sounds produced as you disassemble. That's the secret sauce right there.
Oh shut up
@@minormarley5195 It's much more soothing like this, so how about you shut up.
There's music when he turns on the game sometimes, but that's about it.
It really is. I don't vibe any 'asmr' stuff, but this would be the closest thing for me.
@@SilentAsShadow Agreed.
Man, seeing the words "PlayStation 2" and "Retro Console" together is a gut punch I didn't expect to feel today...
😭
20 years ago is 2002, not 1990, just to complete the one-two combo.
I thought the exact same thing lol
We're getting older and older every second...
@@megaman874
Well then, Gabby:
It's because I'm gonna turns *24 years old* on the next month/April (while my younger brother will be *20 years old* this year...)
as someone who grew up on ps2, seeing him repair it genuinely gives me happiness and gives me hope on people like him not letting nostalgic consoles be forgotten to gather dust.
I'm always impressed that you can not only disassemble these really intricate electronics so delicately, but you even do it around your camera and get these incredible shots. You've helped me gain the confidence to fix my own electronics and I'll be forever grateful to you for it!
Forever? More like “till’ i get electrocuted”
@@wakelogger8357 yeah bro, electrocuted with like... 12v. shocks from computers are a mild inconvenience at worst unless you fuck around with the power supply
@@emma-po6vp dat power supply don’t play my g 😂
@@wakelogger8357 projecting much lol
They are not intricate. lol
These chunky old PS2s were beasts... I know this because I have one that is over 20 years old and still works like it did the day I got it for christmas. I was 15. I'll be 36 this year.
Same, I think mine would still work if my TV had the component ports (red, white, yellow) or a SCART port!
@@timehunter9467 they make an av component to hdmi converter! I got one for our vcr!
@@drummergirl4239 I had no idea they existed, might check it out!
I love this version of the PS2 I got one recently at a garage sale and before even powering it up I took it apart and cleaned it well with a air compressor and had not had a problem with it since it's from 2001 go to to show that they don't build them like they used too.
Mine still works too. Should put it in a box somewhere so it doesn't keep collecting dust now that I think about it.
I just purchased a fully working PS2 yesterday on EBay…I’ll be damned if I ever let it get to this state, the sentimental value these things have for us 90’s and 2000’s babies is unparalleled.
I feel you, i plan to buy one too
The older generation, mine for example that grew up on Atari's, have a fondness for this system as well.....a lot of classic games released
I restored a ps2 recently that I found in my wife's parents house. It was hers from when she was a little girl. When I got the ps2 I was in shock. It was much MUCH dirtier than the one shown in this video. I spent a total of 4 hours cleaning every single inch of the ps2. At this point I didn't even know if it would ever work again. Once it was all back together I put gta vice city in, and low and behold..she fired right up. I turned the volume up just to here the startup of the ps2. Ive never felt so nostalgic. To play the game that I probably played the most felt made me feel like a kid again, but old as shit at the same time. Lol
Yeah, I purchased a reconditioned slim version at a retro gaming store in my area. Never letting that thing go. It's had to be worked on a few times, but worth it in my opinion. Retro gaming has become, far and away, my preference.
Late 80s babies as well. I got it on christmas 2002 with GTA3 and FF10! Never forget these days 🙏
One thing this makes me appreciate more is how far we've come in terms of hardware. Yes they're still meticulous but god this is one of the most stress inducing tear downs ever.
Tell me about it! This console was so fragile.
I'm pretty sure I "IKEA'd" my PS2 when I did because after trying to put it back together I was like "And I have...all these extra pieces left..."
though it was "simpler" to repair certain consumer electronics years ago. I put simpler in quotes because it was during the capacitor plague and those are usually more visual when the break/pop. So being able to quickly go- yea its that little few dollar part right there with minimal testing was..dope but obviously not the ideal scenario considering it shouldn't break in the first place
It's gonna be my first console teardown so I've been soaking any info up that I can get, I have a couple of fixes to do too, thankfully they're not too bad, I'm not as stressed now that I kinda know the basics, there's plenty of even more complicated consoles out there after all
You think this is crazy wait til you see an Xbox 360 teardown. That shit gives me anxiety.
It's always so interesting to see a piece of electronics that you've only ever seen assembled stripped down piece by piece to see all the components that are required to put together to make something you can recognise. Really makes you appreciate the arterstry needed to make something like the PlayStation 2.
Facts!! It's also amazing to watch restorations of the different generations, and the leaps in technology. The Atari had one tiny board and maybe a dozen screws. The Wii has like 100 screws! And the PS2 is packed with engineering, literally. Several large boards, covered in capacitors, and electronics. I haven't seen inside a PS5 or Series X, but the inside of those things must look like they're from another planet. Reminds me of opening the hood of a 60's car versus a car from today. Both impressive, but the leaps in technology are staggering.
@@nicholasadams2374 To be fair I think Nintendo overdid it with the screws for the Wii lol
The little tune when the PlayStation was turned on, man what a flood of nostalgia that gave.
as someone who is usually a quiet subscriber, i’ve been patiently waiting for a restoration video because i really enjoy them. they’re so relaxing and i couldn’t find a better way to wind down after work. so i am very appreciative of this.
Best 24 minutes I spent today :) Replacing the sticker was an unexpected though surprising delight.
Your precision and care of camera angles is always appreciated. Your vids are always very satisfying :))))
I think he did the right thing replacing the sticker. It’s not everyday you see a sticker on a new PS2 LOL
I’ve been trying to reach you about your car’s extended warranty.
Poor Baku
Holy crap I had no idea this video was 24 minutes hahaha!
This world is rapidly passing away and I hope that you repent and take time to change before all out disaster occurs! Belief in messiah alone is not enough to grant you salvation - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36) if you believed in Messiah you would be following His commands as best as you could. If you are not a follower of Messiah I would highly recommend becoming one. Call on the name of Jesus and pray for Him to intervene in your life - Revelation 3:20.
Contemplate how the Roman Empire fulfilled the role of the beast from the sea in Revelation 13 over the course of 1260+ years. Revelation 17 confirms that the beast is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years going back to Babylon and before, C) History as we know it is fake. You don't really need to speculate once you start a relationship with God.
Can't get a response from God? Fasting can help increase your perception and prayer can help initiate events. God will ignore you if your prayer does not align with His purpose (James 4:3) or if you are approaching Him when "unclean" (Isaiah 1:15, Isaiah 59:2, Micah 3:4). Stop eating food sacrificed to idols (McDonald's, Wendy's etc) stop glorifying yourself on social media or making other images of yourself (Second Commandment), stop gossiping about other people, stop watching obscene content etc. Have a blessed day!
You sir are the gaming system equivalent of The Cleaner in Toy Story 2 who comes to repair and spruce up Woody. Your work is super cool and super satisfying to watch. I get the sense that we have become a society of Replace versus Repair, but you have restored a bit of my faith in humanity. Thank you for all the work you put into your videos! This is easily my new favorite channel.
I love the Toy Story woods repair man comparison you made there!
This is great comparison- I’d pay good money for a console treated with this kind of care and repair.
I'm so happy you uploaded this! I've been hoping you would repair a fat ps2 so that I could follow along and restore mine as well. Thank you so much!
I did this at the start of the pandemic because of your videos! Mine didn’t have any damage just a lot of dust and something like syrup in a controller port. But it’s so cool to finally see you and the Ducktor take it on too. Thank you for all your great content!!!
I did too but it was my PS3 🤣 I'd never done it before. Took it apart. Putting it back together was the hardest part lol. Luckily I found a food video that helped me assemble mine. It's so satisfying cleaning the dust off lol.
I also wish to do this in the future.. mine’s mostly just dusty however i recently found out it can’t read disks anymore after wishing to play a game in it. so i’m planning on replacing the reader bit so it will work again (it turns on just fine and everything else works it’s just reading the discs that it stalls on)
9:31 The capacitor bit was super enthralling. I learned so much! The circuit board has a plus and minus for correct placement: things I didn't know, that replacing one could be that easy! Am stupidly excited. And that soldering work was smooth as butter. I love your video style, just a white table, black gloves and only the sounds of the project. And friend ducky.
And it's also worth noting: when replacing a capacitor, be sure that the new capacitor has the same capacitance and voltage rating as the old capacitor. So, in this case, he was replacing the 3 broken capacitors on the power board, and those capacitors were rated for 470 microfarads at 25 volts.
@@LOLMAN9538 oooh, good to know! 👍
Hey! As a fellow tech enthusiast, I appreciate your excitement for the PlayStation 2 restoration video. It's always cool to learn new things about electronics. By the way, have you heard of the HOTO Compressed Air Capsule? It's a handy tool for keeping your tech setup clean and spotless. Check it out!
Don't take it off the board like he did, use the wick BEFORE removing the component. It puts less heat stress on the board and the solder pads that way. Also, it's a lot cleaner and faster.
@@Ibrahimarm That's what most professional repairmen do nowadays.
I was waiting for this one! Thank you so much for restoring this. Phenomenal job sir! You are the best.
He has restored other PlayStation 2 consoles
Shut up
@@dreddsy2984
Yeah, Dreddsy...😜
Just *keep calm* and *please shut up already* right...
Yes *he is for mdjdnfk- sur- sure.*
When you blew compressed air on the controller/memory card slots, that was the first time I'd ever seen dust fly off of what you're restoring.
Nice.
not a gamer nor have i ever played in a playstation but im an electronics engineer and i watch your videos for the asmr and ideas on restoring old electronics. these videos are mesmerizing!
Him restoring an old PS2 makes me realize how old we all have gotten. Nostalgia at its finest.
I came here after watching the cast iron pan restoration, and I've also seen his other restorations. This man is the jack of all trades, master of everything. The companies go to him and ask how much and he says yes. Awesome video!
Wyatt Guina are these just spam bots or something
I have a great time watching your videos! You do a great job restoring consoles, giving them a second chance! :D
I can't believe how you always manage to fix these crazy broken machines and items. You make it look so easy, but I'm sure it's taken years of training to get to this level of expertise!
Game consoles are surprisingly easy to repair, especially the older ones. I love watching these videos because they can encourage others to repair something that they may have thought was gone forever
Well aren't you talented
@@specificorb3
I repair electronics for a living, and while vintage game consoles tend to be far simpler than say, apple products. They are by no means easy. There are many many many issues that are common and extremely tricky to diagnose. The fat model PS2 for example has three (sometimes 4) adjustment screws for the optical reader and all of them need to be within range. It's a time eating nightmare, and might not even be the cause of a no disc read.
@@specificorb3 With time perhaps, but not every repair is easy is my point. Three capacitors is simple, but when a system has been dropped with smds burnt off, and a broken digitizer clip, that is not easy. It's a wide range for sure, but a range nonetheless.
Anyone can learn repair, and I think everyone should. It's much better than replacing entirely, but I have an issue with the idea that just because it's old technology that must mean it's easy. It isn't always the case, and I've seen plenty of attempted repair items come into my shop, and a fair bit of time they are damaged beyond repair due to people trying to follow an online guide that gives false information. It happens very frequently.
First time I’m catching one of these. I’m new here from the candy machine and went down the retrobrighting hole with your videos (as well as some other restorations). Just wanted to say thanks so much for making these high quality, relaxing and informative videos :)
Welcome to the Odd Family!!
@@APixieNinja Thanks, happy to be here.
@@samuelturner6076
Well thanks for your comments right here, Samuel Turner and Illenial Lisette 😁👍
i spent so many hours watching my dad play jak and daxter as a kid. still one of my favorite series to this day. id love to get my hands on a another ps2 and a physical copy of j&d someday. great video!
This brought me such happiness to see the care and love still being shown for great consoles and the experiences they gave us and can still give us
I take my hat off to you! Electronic restoration and repair was something I wanted to get involved in, but life took me down another course. I feel as though I can live vicariously through your videos. Thanks for all your hard work and dedication.
(Hector Hoover, name suggestion for your new friend.)
You can just do it as a hobby.
@@hellcatdave1 yeahh totally! Lol everyone, send me your broken-down electronics, I'll... try to fix them heh.
@@shiloc009 I mean he ain't wrong haha
I myself tried to study Electrical Engineering after doing IT at highschool, because I always learned some stuff from my dad and I was also always fascinated from all that stuff. Sadly after 2 semesters, it turned out to be way too difficult and I switched back to IT.
However, I still managed to fix stuff here and there with the help of some UA-cam videos and definetly some dedication. Best thing my dad and I have done, is to fix a PS4 from my brother-in-law. We both had absolutely no clue what's going on, but with a bit of soldering experience, we ended up doing the math. We couldn't have been any prouder than on that day.
@@Adeyum64 totes my goats! I'm inspired!
@@shiloc009 or you can just whine like a baby.
My PS2 has practically suffered the same fate, as in its kicked the bucket to the point where it won't start anymore seeing as how old it's turned now. I was honestly amazed to see this one being revived after so long. I'm currently seeing if I can get mine restored and repaired as well.
Looks brand new! This takes me back, what a console.
I see what you mean!
I still own my original PS2 Slim, the only retro console I've held onto. Good to see a Fat get restored!
I still have 2 of this "fat" model that my kids and I still play together honestly think it is a great console 😊
Se estreno en 2002.
Thanks for sharing this video with us. Looking forward to seeing more great videos.
One of the greatest video game consoles ever made. I haven't forgotten the great memories I had with my PS2.
It’s the top selling console of all time still to this day. The N64 is my favorite even though I love this one too.
@@timothys3119
Well done ya, Timothy S 😄
Do you still have a liking for both *PS2 and N64* consoles 🎮 as for 2022 right now 😗?
@@rahadianaryo5979 whats wrong with you ? Weirdo
Watching this video is crazy. At one point this console was someone's pride and joy. Time marches on.
@@michaelgasser38
Well played ya, Mikey 😏👍
As for *22 years later* (2022), it's definitely still being a *pride and joy* for someone's fondly remember about it...
thank you for cleaning up a part of my brain gave me so much nostalgia as soon as you turned it on- lovely job! another ps2 lives to see 2022
Back in the days where consoles could be repaired. By the way I subscribed to the channel because of its ASMR and the content I like. Well done!
those resoldered capacitors, you did a BEAUTIFUL job on them, clean, minimal solder...that kind of quality work pleases me.
Genuinely cried tears of joy when you put Jak and Daxter in. That game was my entire childhood, from the sound of the PS2 startup to the intro of that game. Very good taste!!
Sameeeee
glad im not the only one. really made me tear up when he loaded in jak and daxter. god the memories.
I know Jak and Daxter, Ratchet and Clank and Kingdom Hearts was my Childhood on the Ps2👍🏻.
It's epic how dusty this PS2 is and it didn't catch fire to the internal system -- It's nuts. Awesome work on cleaning it thoroughly.
Interesting watch as always, but I do have one suggestion. Don't let fans spin when attempting to clean them with compressed air. You don't want this to happen for a couple of reasons:
1) The fan will actually begin to generate a small electrical charge due to the centripetal force the air exposes it to. This can potentially cause a short in your system once reconnected.
2) Air causes the fan to spin at a speed much higher than it is rated for and can damage the fan blades and bearing that allows it to rotate, thus making the fan rattle or fail prematurely.
If you used compressed air to clean a fan, you want to keep it from spinning. Something through the blades to block it from moving will work, or some gentle pressure from a finger on the blades. Hope this helps!
This is real, I've a friend that burned around 4 or 5 fans of his computer when cleaning. He was lucky that he had a feeling to not use compressed air on his GPU lol, just broke some cheap fans
Hey, I've been researching some cool tools to optimize my desktop setup and I came across the HOTO Compressed Air Capsule. It offers powerful vacuuming and blowing capabilities, making it perfect for maintaining a spotless environment. The price is reasonable compared to other brands and it has some great features like high-quality filters and multiple tubes. Might be worth checking out!
Your a life saver. My PS2 was clogged up with dust and I was worried about it possibly overheating and catching fire, but now I feel better about it since I was able to clean it thanks to your demonstration.
Loved that u saved the sticker off the top
The vacuum segment was adorable ❤️ 😂 I always love the older game system restorations!
When you violently press the power button expecting a different outcome
The definition of insanity
I’ve worked in IT since the late 1990’s. That repeated press is more of a spiritual thing that any expectation of a technical outcome.
You never miss, your videos are always so beautifully put together and brings me a sense of nostalgia.
I fixed and restored this exact model about a year or two ago, definitely one of the easier consoles to clean and repair, although I will say the heatsink and the fan blades look different in this video. Anyways these videos are satisfying to watch, keep up the great content.👍
I think my favorite part of these videos is the attention to small details. You know the sound of an air compressor over a microphone is the same effect as shoving a pencil in your ear, so you modify it in a way to still get the sound across, but in a less damaging way, and with the vacuum you even made it comical without damaging peoples ears.
It's called audio normalization, a standard built-in function of most audio editing software. I'm surprised not more channels use it.
Thank you very much, i cannot express how much this video helps me while I'm assembling my PS2, it maybe not a perfect tutorial video, but I'm still grateful thank you ver much ❤
I would recommend holding the fan wheel firmly while cleaning.
The reason for this is the high speed it reaches due to the compressed air. The bearings are often not designed for this.
If I am not wrong, these fans don't have any bearings, they are magnetic. I may be wrong
@@wladimirrojas7902 or Maglev (magnetic levitation)
for what i know if you spinthem without power thet build static charge and the discharge into the circuitry can be harmfull
@@marcopimentel1152 *spin them
Yeah it can also simply break the blades.
I remember the day these went on sale. The line down the sidewalk was easily 4-5 times the number of PS2s we had in stock. 😆
Ok boomer
@@derwastl bruh
@@derwastl ok clown
Okay I usually scroll past 90% of videos that are 15 min or over because they’re too long, and even the ones I don’t pass don’t get watched all the way, I usually skip around for the good parts. When it came to this video though, I watched the entire thing from beginning to finish without any hesitation. Everything about this video was perfect. The sounds of your work, the timing and verbiage of your captions, your little bits of humor, and even the bonus stuff like the comparison of that building. Bravo my friend bravo.
This probably has to be one of the most satisfying restorations that I've seen in a while. It went from disgusting and caked in grime to looking like it had just been unboxed
Your restorations are just enjoyable to watch. This particullary, not only is a work of art, it also is a throwback to awesome memories and for that sir I say THANK YOU!
I was shaken to my core when you turned the logo on the disc drive to go with it being vertical. I never once knew you could do that.
Am I the only one who gets excited when he posts, your repairs are amazing, keep up that amazing work
Yes
When you turned it on, hearing that startup sound just unlocked so many memories I had forgotten I had
WOW, PS2! This brings back so many memories! Really cool restoration video! 👍🏾
Seeing a "fat" PS2 always brings back great memories. Epic console!
Great video, as always. Amazing work; happy to see more of the retro console restoration community! :D
It's people like you keeping these console alive and around. thank you for what you do...!
Another Odd Tinkering video. Just what I needed
I'm always amazed at how good you are at doing this, I could never dream to be able to fix my own consoles that well. I'm afraid mine are eventually going to end up dying.
Seriously, just watch a few teardowns of whatever it is you're wanting to restore and just take lots of photos.
Think of it this way: If it’s broken, trying to fix it won’t make it any worse than it already is
They easy to do
I always loved the fact that you replicate all the original stickers and logos great job mate 10/10
How did he even do that?
Thank you for giving forgotten junk a reason to live
It's always really interesting seeing all the internals and how they're put together. I recently did a little bit of tear down of my own for the first time when I took apart my old 1060 gpu to replace thermal paste and dust it off, with plenty of reading and video watching to reduce the likelihood of me breaking it. It was really cool to do something like that myself not only successfully but to then see the temperatures under load improve as well.
I’m not even a 90’s kid and this along with the Nintendo 64 were the first video game consoles I ever played. I was I Pre-K.
same here! i got a bonus tho bc i'm the youngest of 5 and my eldest brother was born in '93 so we got to use all of his stuff >:) atari, n64, playstation, xbox, etc.
we got our own wii for christmas in '09 and it was our first non-hand-me-down console. best christmas ever
second best was my mum finding a sega genesis at DG(????) for $40(?????) an absolute friggin steal
she got the game genie, sonic, kid chameleon, and earthworm jim
A beautiful model of the PS2. Made for a great audio system also
Monster Hunter
Viewiful Joe
Dragon ball Z Budokai/Tenkaichi games
Devil May Cry
GOD HAND
To name a Few!
Amazing restoration. So many parts to it. I found this one so interesting and enjoyable. Thank you!
Thank you so much for all your restoration vids!! So satisfying! I grew up tearing things apart to fix them, now as an adult, they actually work!! things go a certain way, and should work the way they should... Trouble shoot is a a great way to start..! Building big PLC and Motor control panels for the past 30 years helps a bit. I remember tearing apart my 1st Atari as a kid and made it work.. lol...
I love watching these videos, it makes repairing things look so easy, until you try it yourself and you destroy what you were trying to fix forever!
In all your videos, you always know how to dissassemble all the little pieces, its like you learn how to fabricate it all, i love that
Dude, the console turns on and gives me major nostalgia. Then, this guy puts THE quintessential PlayStation 2 game into it. I felt like I was in 2003 again.
Aside from the memory card slots, the PS2 still looks modern. Wonderful restoration, as always
Seeing it work just made me cry out of happiness.
I bought a PlayStation 2 from Goodwill in the same condition. Because of this video I was able to disassemble the whole thing, clean it and get it back to its rightful condition! Thank you for making these videos!!!
I have one of these. I found it at a thrift store a couple years ago for $15, no repairs were needed! It still works great to this day
Love you’re videos. Very relaxing
9:07 call it the.. "SLURPINATOR"🤣🤣.Amazing video🛠👏😃
Your answer goes here
Hear me out
A large paintbrush is a great tool for cleaning. The long bristles get into all the corners really easily and are also soft enough not to mark soft plastics or printing.
I was hoping/praying you were going to turn the PS logo on the disc tray at least once. Truly delivered.
You have not only restored an old console. You restored the Playstation 2. Well done. For me the most beautiful console ever build.
Your answer goes here
22:08 oh yeah, that sound brings me back :,)
Ps2 is honestly still an extremely sick-looking console. I love it!!
Oooh ps2!! Brings back mad memories. Played some great games on it like Metal gear solid, Final fantasy, def jam, soul reaver, Spider-Man, grand tourismo man just to name a few.
Love this video! You had a lot more fun little elements in this video and it was a great addition. Keep it up!
I'm glad to see you back fixing these gaming consoles again. It's always fun to watch these kinds of videos.
This PlayStation looks like a relative of the ‘Finding Nemo’ PlayStation restoration you did 🙏☀️
And it looks like an early ps2. Glad it finally gets a good touch up.
Totally in love with the capacitors bag 😍
Between Star Wars Battle Front, SoCom II Navy Seals Online and Grand Theft Auto III, I spent an unconscionable amount of time in front of my PS2! And I totally loved it! Seeing and hearing that startup screen brought back some fond memories! Thank You!
That was Oddly Satisfying to repair this ps2 Restoration Good Job bro, that Video Was Amazing 💙👍🏻
0:05- Man, it’s seen better days :(
21:23- It’s beautiful! It looks brand new :)
Your answer goes here
Fanatic job! Me and my brother got that as a shared gift for Christmas in 2002. And that’s also the start for gaming 🤠
7:58 Not only wasn't it effective, you also run the risk of breaking the ball bearings on the fan like that. The fan blades are designed for air current running in one direction and the whole axle can bend crooked. If the bearings become off centered, the next time you power up the fan it will sound like an airplane is trying to take off...
Also, a turning fan generates electricity.
A motor is just a generator thats being turned by something, in this case, the compressed air.
@@nemtudom5074 Yikes! I haven't even considered that... Could it mess up your motherboard by feeding back energy or are there built in safeguards against that sort of thing?
@@robdom91 I havent heard of any safeguards being built in.
Maybe some of the fan manufacturers give a damn and prevent that, but asi said, i havent heard about there being any....
I physically recoiled when I saw him do that. Just shouting at the screen "NOOOOOOO!!!"
@@nemtudom5074 It would have to spin insanely fast for it to generate electricity to blow the header or ruin the fan.
I still have one of these “fat” PS2s and it runs like a champ. Need For Speed Underground 2 runs awesome.
So it's 22 year old now rigth ? Are there instances it needs repair? Or it's never damaged even once?
@@alenaduplantier4505 no repairs to it! It has never been taken apart.
Wow nice 👍👍 my ps 4 is with me for 5 years I hope it also reach 20 years plus withouth repair
Same. Mine's been softmodded and running FreeMCBoot since 2010, and I've had an old IDE drive in it since ~2014 to store my games on. That way it's actually possible to play Gran Turismo 4 without disc read errors.
PS2 was the last and only good console Sony made. Didn't bother with the others after Xbox came out, which is 10x better.
It's been about 2 months now since my dad's suddenly passed away, but your videos always remind me of the type of work he used to do up late :) When I was younger I remember I would go to the kitchen in the middle of the night to get some water and I would just catch him sitting there on the kitchen table with his lamp on working on some type of board soldering, fixing, and melting parts here and there with that hot metal tool of his, I remember he would call me over and I'd watch for a bit before going back to bed it was always so fascinating to see him at work :> I'm almost 20 now and watching these types of videos just bring back good memories with my dad, so thank you Odd Tinkering for always bringing that nostalgic and satisfying work :")
Condolences on the death of your father!!! This hot tool is a soldering station, it's called. A hairdryer is connected to it, which can heat up to 500 degrees Celsius + a soldering iron for boards and all sorts of wires. The soldering station has airflow adjustments for the hair dryer, temperature. Also soldering iron temperature
Great vid! PS2 brings back alot of happy memories and Jack & Daxter was a great game too I could still probably finish it in an afternoon 😁
You just saved one of the best home video game consoles of all time. Great work man!
Brilliant video as always 👏👏 When I refurb PS2 or N64, a good soaking of the case with WD40 and then buff with lint free cloth brings them up a treat.
Best restoration channel, period!
please never stop making these videos, you help me fall asleep at night and relax in the afternoon
Your answer goes here
I love this so much, watching a rusty junky PS2 being cleaned and restored to it's former glory was divinely satisfying to me. The PS2 was my first real game system, with my first PS2 game being Spiderman (the game based on the movie by Sam Raimi), followed by games like Batman Vengeance, Hulk, Pac Man World 2, I could go on and on about the good memories I had from my childhood.
What about you guys? What were your first games?
Sam & Max on Wii
Gran turismo, Jak and Daxter, rachet and clank,madden 06,nhl,nba live, Gran theft auto, resident evil 2,Tenchu, Final Fantasy 10 10-2. NBA street, def Jam New-York,Tony Haws and many more
I think crash the wrath of cortex! PS2 wise
But my be eddy first video game was banjo kazooie on the N64.
Mine was Metroid Zero Mission on GBA, i still remember that game by heart many year later!
Scooby doo and a ninja game, I forgot its name but there are a whole lot of others
I had a bad PS2 before, so, GLAD I saw this!