Love your content Joel! Even the older stuff like this is super helpful! Just a side note to anyone especially in NZ that’s looking at buying one of these kits, don’t!!! Absolute muck arounds that won’t even acknowledge a mistake on their end, they sent out a long entry template for my short entry and failed to take any responsibility
It was definitely hard to take send a hole saw through a brand new panel 😅 but i just made sure i checked my measurements like 10 times before i cut into it 😆👍
If your going to do water crossings plug those holes up in the airbox and install some kind of bung to let rain out. Trust me I just wrote my np off doing a creek crossing
great advice! I want to find an aftermarket airbox that uses a panel filter system, but in the meantime putting a safer drain system in there seems like it would be a smart idea, Cheers Matt!
Definitely need to get myself a snorkel. Took my np over to Moreton for a week and almost flooded it when the tracks got flooded. Luckily the sensors picked up the water and shut my ute off before it could suck it in.
@@TheLordsaviour yeah if the mafs sensor gets wet it can lead to them shutting off. Also the air filter was absolutely soaked so pretty much no air was getting in which it didn't like either
@@TheLordsaviour yeah definitely a scary thing. Pretty sure my airbox wasn't sealing properly either so probably another contributor to what happened. All good now though. I got my snorkel haha
I had one looked good that’s about it I was 10hrs away from home had some rain it sucked into the airbox and socked my air filter. Now run a safari snorkel which covered the hole in the guard. And doesn’t flood the air box and is a sealed unit
Instead of putting the rag in the intake pipe, perhaps put it over the intake pipe and put an elastic band over it. Harder to forget, and possibly better at keeping the crud out of the pipe. Also wow! I did not realise a snorkel was so involved to install. I might just fork out the cash to get someone to do it for me so I don't destroy my car by accident :D
@@jpcaptured799 Acknowledged..! Iz this mod legal in your country? I got my bilsteins5100 but i hvhve to purchase the 2" spring lift front and rear, and i am going to do a 2" bodylift...what would you recommend for 2" body lift? Thanks mate...🇹🇹
Love your vids man! Just a question with the snorkel process, are you happy with just the silicon hose and hose clamp to seal the joins? I’d be worried about water getting in somehow! With the safari snorkel you can run a bead of silicon in the joins would you do the same?
Hey mate, one year later how have you found it? Do you regret going stainless over plastic, how’s water ingress been and have you gotten sick of the noise? Cheers
Great job. I may have missed it but how long did this take you and/or how much time should people allow to get the job done? Cheers again. Keep the videos coming.
G'day Corey, I did forget to mention that, Damn! I will have to make sure I make note of that in my next vid! I took my time with this one and I would say about 8 hours in total. it’s hard to say exactly as filming at the same time take s up a lot of time too. If you allow for a full days work you should be right :-)
Easier to pay someone to install it, if you fuck it up your footing the bill, whereas if they fuck it up youll be right, paying labour is worth it, especially when it comes to snorkels
bro, you are amazing, in this video, you had lift suspension kit installed? or had spacers suspension front and rear? thanks bro! i have a NP300, im from El Salvador but here,its very difficult find offroad accessories for my car, i am searching in ebay and some australian pages.
Hey mate I just had the exact same short entry MMW stainless installed to the factory airbox. I'm still concerned that I might the dr9wn the engine of the airbox isn't completely sealed off. Is the air intake completely sealed if your staino connects to the original factory nissan airbox? Have you any issues with your set up?
Any 1 had any issues with the 4inch stanless pipes being so.dam loud and quite annoying? Any ideas im.thinking of either outing the.safari back on or , coating the inside with body deadner thoughts?
I personally don't notice the whistle unless the window is down. and sometimes i wind the window down just to listen to it. because the engine on these things are so damn quite it's actually helpful when off-roading to listen to how hard it's working through the snorkel noises.
Hey bro! Curious to whether or not this voids your engine warranty? I'm thinking of getting a stainless snorkel myself and was told the other day by a mate that it may void engine warranty is this true?
Best to check with your dealership. I told my dealership that i was installing it and they said it was fine. I gues at the end of the day they deliver cars with snorks in them 🤷♂️
pro DIY tip, I stole my wifes muffin pan to keep bolts and nuts in while working on truck. She hasn't gotten it back it's mine now
😆✊
Love your content Joel! Even the older stuff like this is super helpful! Just a side note to anyone especially in NZ that’s looking at buying one of these kits, don’t!!! Absolute muck arounds that won’t even acknowledge a mistake on their end, they sent out a long entry template for my short entry and failed to take any responsibility
Thank you
I love this car NP300, nice job man
Wicked cool upload mate!! Got me motivated to fit my own snorkel, gotta be honest had major anxiety watching you whole saw the panels!!!!!
It was definitely hard to take send a hole saw through a brand new panel 😅 but i just made sure i checked my measurements like 10 times before i cut into it 😆👍
That 10mm socket Titanic clip just killed my life 🤣🤣🤣
😂😝
cheers mate Great job ..
Sure that my wife will not ganna like it drilling the panels of my np300 , nice in the end buddy keep it up
Got me thinking now mate good stuff 💯👍👍
Awesome vid bro. Keep it up. Cheers from Malaysia.
I was a roofer. Hated it. So,I did what anyone would do, dress up fancy now I am an accountant. Left in year 10
If your going to do water crossings plug those holes up in the airbox and install some kind of bung to let rain out. Trust me I just wrote my np off doing a creek crossing
great advice! I want to find an aftermarket airbox that uses a panel filter system, but in the meantime putting a safer drain system in there seems like it would be a smart idea, Cheers Matt!
Good stuff dude thanks heaps!
Cheers mate thanks for the vids and info
Great vid mate can’t wait for more
thanks mate :-)
Definitely need to get myself a snorkel. Took my np over to Moreton for a week and almost flooded it when the tracks got flooded. Luckily the sensors picked up the water and shut my ute off before it could suck it in.
Didn't know they did that?
@@TheLordsaviour yeah if the mafs sensor gets wet it can lead to them shutting off. Also the air filter was absolutely soaked so pretty much no air was getting in which it didn't like either
@@JustAnotherGuy341 I was lucky then, i submerged the front right half way up the windscreen. I did poop a little. But drove away.
@@TheLordsaviour yeah definitely a scary thing. Pretty sure my airbox wasn't sealing properly either so probably another contributor to what happened. All good now though. I got my snorkel haha
I had one looked good that’s about it I was 10hrs away from home had some rain it sucked into the airbox and socked my air filter. Now run a safari snorkel which covered the hole in the guard. And doesn’t flood the air box and is a sealed unit
I've also got one and about to pull off due to the droning noise any 1 else.find the loud to loud
Did you get the WATER DIVERTER from Meredith Metalworks as well?
terrific vid mate
thanks mate!
GREAT job
Hey mate where did you get the aftermarket washer bottle?
What’s the point of having what looks to be 3” for the snorkel ( outside ) reducing to what looks to be 2.5” or there abouts
greetings from Honduras I want a snrokel like this for my np300 how do I get it
Nice workmanship bud👌👌
thanks Charlie.
Awesome tutorial mate, keep it up legend 🤙
Whitty Adventures what he said
Good work joely hope you and amie are great I'm getting one of these for my luxy
Jakey boy! Miss ya face brother, hope your well too mate. What Luxy do you have Pal?
@@jpcaptured799 n70 mate
@@jpcaptured799 miss yours too haha congratulations on the channel mate looks great
@88jakey88 cheers matey ✌️
Where does the rain water goes
That's a long entry Meredith metal snorkel right?
Yeh, When I got it I believe it was sold as the long entry snorkel.
Instead of putting the rag in the intake pipe, perhaps put it over the intake pipe and put an elastic band over it. Harder to forget, and possibly better at keeping the crud out of the pipe. Also wow! I did not realise a snorkel was so involved to install. I might just fork out the cash to get someone to do it for me so I don't destroy my car by accident :D
that's a great idea Karina. And yes it is surprisingly intricate.
@JPCAPTURED What are your thoughts on the recommended "water diverter" MMW sell ?
Hey mate what exhaust you got on?
CRG DIESEL TUNING 3" STAINLESS STEEL SYSTEM.
What the nibbler rough on the guard?
Hey mate howz about a 2" body lift.. and vid......🇹🇹
i'm not interested in body lifting my Nav at this point, if ever.
@@jpcaptured799 Acknowledged..! Iz this mod legal in your country? I got my bilsteins5100 but i hvhve to purchase the 2" spring lift front and rear, and i am going to do a 2" bodylift...what would you recommend for 2" body lift? Thanks mate...🇹🇹
Love your vids man! Just a question with the snorkel process, are you happy with just the silicon hose and hose clamp to seal the joins? I’d be worried about water getting in somehow! With the safari snorkel you can run a bead of silicon in the joins would you do the same?
Likes the comment bht doesn’t answer ? Lel
do you need to buy a new washer bottle? or is it supplied?
Any idea if taking the wheel off would make it any easier??
I love it ❤️
did the last elbow piece make it to the air box end up moulding to the hole alright cheers
yup, it ended up pulling into an oval like shape no worries at all!
Hey mate, one year later how have you found it? Do you regret going stainless over plastic, how’s water ingress been and have you gotten sick of the noise? Cheers
no water ingres yet, and i like the noise from a stainless especially since i don't have an exhaust system on my np300.
I just bought a Meredith stainless snorkel for my d22
How does it sit on the pillar????????
Hey mate. Where did you get the new/replacement washer bottle from? Cheers
Supplied in the Meredith kit mate 😉
Bro, whats happen when its raining? Your box have extra holes ? Or use a rain interceptor?
Is this the polished stainless or non polished?
Ute looks smick
What lift size wheels and offset are you running?
Cheers mate, I currently have. 3&2" lift with 33's
When u said KC is this kc engineering Seymour??
Excellent instruction video not keen on how the snorkel is located into the wing other than that it’s a nice kit👍👍🇬🇧
Thanks 👍
did you need to get any special tools for this install mate ?
just what was listed in the video man :-) nothing real special at all.
Great job.
I may have missed it but how long did this take you and/or how much time should people allow to get the job done?
Cheers again. Keep the videos coming.
G'day Corey, I did forget to mention that, Damn! I will have to make sure I make note of that in my next vid! I took my time with this one and I would say about 8 hours in total. it’s hard to say exactly as filming at the same time take s up a lot of time too. If you allow for a full days work you should be right :-)
Easier to pay someone to install it, if you fuck it up your footing the bill, whereas if they fuck it up youll be right, paying labour is worth it, especially when it comes to snorkels
Hi from Russia!
bro, you are amazing, in this video, you had lift suspension kit installed? or had spacers suspension front and rear? thanks bro! i have a NP300, im from El Salvador but here,its very difficult find offroad accessories for my car, i am searching in ebay and some australian pages.
Hey mate is it a problem if there is a small gap around where the snorkel joins the panel, or is that going to happen.
In terms of water entering ?
Gaps in the panel is no worries, but gaps in the silicon joiner are bad news.
@@jpcaptured799 what do you mean by the silicon joiner? Do u mean where It connects to the airbox under the bonnet?
Great video man very informative 👍👍
Love the last name same as mine lol cheers
Will the ECU can keep dry at the new location?
On this instal would it be a mid entry snorkel your fitting
It's the long entry mate 😄 just double check with MMW though.
JP Captured will do, cheers 👍🏼
Does the stainless glare in your eyes when ur driving v
you can't see it when you sitting in the car Sonny so no glare at all mate!
Do you have a exhaust video for the np300 yet?
Nah 😆 not sure what I want to do with it yet.
@@jpcaptured799 yeah me too. I know what sound i want though. Im loving all your videos man.
Hey mate I just had the exact same short entry MMW stainless installed to the factory airbox. I'm still concerned that I might the dr9wn the engine of the airbox isn't completely sealed off. Is the air intake completely sealed if your staino connects to the original factory nissan airbox? Have you any issues with your set up?
What did you do to get massive biceps?
100 snorkel curls a day 😂
You forgot to paint the holes you drill on pillar
Any 1 had any issues with the 4inch stanless pipes being so.dam loud and quite annoying? Any ideas im.thinking of either outing the.safari back on or , coating the inside with body deadner thoughts?
I personally don't notice the whistle unless the window is down. and sometimes i wind the window down just to listen to it. because the engine on these things are so damn quite it's actually helpful when off-roading to listen to how hard it's working through the snorkel noises.
Is that a short entry?
Thats a short entry mate 😉
Hey just wondering, is there much difference between going short entry and long entry? A different note? Just looks? Better performance?
Purely just looks Gordon 😁
Hi what size tyres are you running with spacers up front? btw love your videos👍🏽
Wondring why you would put a snorkel on if ya ecu is in the engine bay and is at risk of getting wet aswell ??
they put the snorkel around the wrong way
Hey bro! Curious to whether or not this voids your engine warranty? I'm thinking of getting a stainless snorkel myself and was told the other day by a mate that it may void engine warranty is this true?
Best to check with your dealership. I told my dealership that i was installing it and they said it was fine. I gues at the end of the day they deliver cars with snorks in them 🤷♂️
I am fascinated with that snorkel system. Kindly direct me Sir how can I acquire the same thing for my NP300.
Thank you.
The amount of stuff that needs to be relocated just gives me anxiety 😅😅
Snorkel installs are surprisingly involved, haha.
Mate nicest intro ever seen by a down under bloke
🤣🤣🤣 I lost my 10mm in the same spot. Resting place unknown
hahahaha! RIP
only fail of this.... is where is the start up and driving sounds of the intake..
how could i forget! maybe you will need to check out some of my other vids 😉
300