Enjoyed this video... Really nicely designed and engineered components... And a beautiful looking Beetle you got there. Enjoyed this video... Great work! Greetings from Indonesia.
Got to be the nicest engineered kit I have seen to date. The video is just so professionally done. Better start saving. Can I ask, bug is so nice, love how clean it is. May I ask an off the wall Q?? What product have you used on the pan underneath to protect it, looks Matt finish and how often do you apply? Will be looking on your web site. Thanks
Thank you for the kind words man!! Appreciate it. As far as the underside finish goes, I can’t be sure as it’s not our work… It could be Upol raptor thinned and applied with HVLP gun, as that leaves a very similar high quality finish.
Such a beautiful kit! One question though, the rear spring plates look like they are located and pivoting only in/by the end plates? Would this not wear the rubbers out quickly? Wondering why not a solid or roller bar like in the front for the spring plates to pivot on?
Really good quality video, for the 66 Bug kit is it the same way as this? And does it come with recommended torque specs? And does the kit require a compressor, or where does the air come from? Thank you, do you guys also ship to the US
Thank you! ‘66 beetle kit would be the same rear as shown, but the later style ‘ball joint’ based front end kit. Compressor, controller & tank etc are all referred to as ‘management’ and are available as complete packages. There’s a stack of different types available, and we stock some of AirLift Performance’s management systems. We ship to the US all the time, drop us an email for an up to date price. Max
How important are the shock relocaters I have different stile of shocks but having problems lifting the front . There's air in lines ,No air leaks pressure switch is working , there's no rubbing of any parts but front won't go up. Any info will be appreciated thanks
Correct. They’re not a good idea on a slammed car as the axles hit the heater outlets and can damage them and the engine. They also get in the way of the top mount of the kit! Thank you
It’s firmer, but generally a whole lot better than a typical lowered setup. Lit will lift higher yes, there’s about 4-5” available in the front and up to 6” in the rear.
What are the wheels specs. I will bagging mine soon and want to have a good stance. I’m completely unsure on what specs to run. I want to tuck but very tightly.
Thank you! It’s a good ride. Not like driving on a marshmallow cloud, a little firmer than that and stock - but precise and modern feeling, absorbs rough roads and speed bumps well.
Yes absolutely, we make a LHD option as well. Almost half we make end up on LHD cars! And it’s a 1600 TP with twin 34’s & Stock Exhaust with Cartune tips. Great little setup
I was very impressed by the engineering design of all EVA products.
Pure quality kit, nice one Max
Thanks buddy 👌🏻👌🏻
Enjoyed this video... Really nicely designed and engineered components... And a beautiful looking Beetle you got there. Enjoyed this video... Great work!
Greetings from Indonesia.
Thank you!!
Nice! Don't have to pull motor and gearbox to install. Mint mate!
Thanks man!
Very nice project. That so cool
Think I can see myself heading your way at some point...Can’t continue with the static drop nowadays...swear those humps are getting taller..👍
I think the same... and more of them too, hah! Look forward to helping out maybe soon 👍🏻
Nice job! I missed my volkswagen...
I wish you would have shown full height for "speedbump mode".
Nice kit.
Love the air ride i have a 1962 vw bug how much would the kit that you just showed coast with a compresser and tank i live in the united states
Got to be the nicest engineered kit I have seen to date. The video is just so professionally done. Better start saving. Can I ask, bug is so nice, love how clean it is. May I ask an off the wall Q?? What product have you used on the pan underneath to protect it, looks Matt finish and how often do you apply? Will be looking on your web site. Thanks
Thank you for the kind words man!! Appreciate it.
As far as the underside finish goes, I can’t be sure as it’s not our work… It could be Upol raptor thinned and applied with HVLP gun, as that leaves a very similar high quality finish.
Que bueno me gusta mucho el trabajo mecánico y los bugi
Such a beautiful kit! One question though, the rear spring plates look like they are located and pivoting only in/by the end plates? Would this not wear the rubbers out quickly? Wondering why not a solid or roller bar like in the front for the spring plates to pivot on?
Really good quality video, for the 66 Bug kit is it the same way as this? And does it come with recommended torque specs? And does the kit require a compressor, or where does the air come from? Thank you, do you guys also ship to the US
Thank you!
‘66 beetle kit would be the same rear as shown, but the later style ‘ball joint’ based front end kit.
Compressor, controller & tank etc are all referred to as ‘management’ and are available as complete packages. There’s a stack of different types available, and we stock some of AirLift Performance’s management systems.
We ship to the US all the time, drop us an email for an up to date price.
Max
Looks really nice 🤙 🇺🇸
How important are the shock relocaters
I have different stile of shocks but having problems lifting the front . There's air in lines ,No air leaks pressure switch is working , there's no rubbing of any parts but front won't go up. Any info will be appreciated thanks
Great job! I've been following your progress on Instagram keep up the great work:)
Thanks buddy 👌🏻👌🏻
Hi, great video,
What’s the wheel setup?
And rear spacer sizes?
Thanks
Great insight mate! Great car too 👊🏼
Thanks buddy 👌🏻👌🏻
Very nice bolt in kit. Well made but looks like heater tubes cannot be used????
Correct. They’re not a good idea on a slammed car as the axles hit the heater outlets and can damage them and the engine. They also get in the way of the top mount of the kit! Thank you
How much does all the equipment cost? TQ
The video is very interesting and I would like to know if they have that system for sale and how long it would take to send it to Mexico, excellent
How does it ride compared to stock? Also is this fully inflated or can it go higher?
It’s firmer, but generally a whole lot better than a typical lowered setup. Lit will lift higher yes, there’s about 4-5” available in the front and up to 6” in the rear.
that booty walking in 19:28 needs to have its own episode
Such a nice kit! I really want one 😊. How long does it normally take you guys to fit and setup.
Saludos... Cuánto cuesta un kit de suspensión de esos? Como se llama? Y donde se consigue?.... Agradezco información desde Colombia
What are the wheels specs. I will bagging mine soon and want to have a good stance. I’m completely unsure on what specs to run. I want to tuck but very tightly.
Did you have to do any modification to the pan or body to sit that low fully aired out?
Nope, fully bolt on here my friend!
Stock is rock
How narrow is the beam in the video? 2 or 4?
What does this setup go for with installation?
We charge £950 to install fully. See our website for kit prices. Thanks!
Really curious what the ride is like compared to stock?.... I want comfy suspension and the bags would be a bonus!..... Great kit! Cheers
Thank you! It’s a good ride. Not like driving on a marshmallow cloud, a little firmer than that and stock - but precise and modern feeling, absorbs rough roads and speed bumps well.
does this go on 73 beetle as well?
This kit work on the Type 3?
Hello, i want to buy the full air kit, how much do you offer?
Do you delivered to USA
Why is there so much play in the axle @14:45 front to back? How do you ensure alignment and not crab walking?
what size tires you runnin?
What is the price on the whole Air Ride parquet?
If I live in the US can I buy this from your site.
Does anyone know a good air suspension kit for a 71 super beetle
What's The Tire Size? And What Brand Tire's Are They?
Will this work on a 67?
why no mention of the compressor?
What tires are those?
Can you please provide the tire and rim size?
135/80 front.
185/65 rear 👍🏻
10/10 🔥
Couple questions: will this work on left hand drive, I’m in the USA. Also what motor is in this red car? Thanks!
Yes absolutely, we make a LHD option as well. Almost half we make end up on LHD cars! And it’s a 1600 TP with twin 34’s & Stock Exhaust with Cartune tips. Great little setup
Could you please do another tutorial video more in depth please
We’re planning on doing many more! What would you like to see in more detail?
I wish I could afford this for mine!! Collab? LOL
Wow, that’s all I can say
Will this fit left hand drive as well?
We do a LHD option, with the right parts needed to bolt right on like here 👍🏻.
Max
How much to ship to California 92707
Can I see what it look like at the highest setting
That system fit into a Puma? I’m interested.
I have one (Puma model Gti 1986)
Too bad you're across the pond. I'd buy that kit for my 67'
They ship to US
🍒
Cherry
Dudes never responded to my email