First Oil Change on GSX S1000 GT - 600 Mile USED WRONG TORQUE SETTINGS AT FIRST
Вставка
- Опубліковано 1 жов 2024
- how to change oil on gsxs1000gt
torque specs for gsxs1000gt:
- Uses 3.4 quarts of 10w-40 oil.
- Use 17mm ratchet for drain bolt, torque to 16.5ft lbs
- Oil filter, torque to 14.5ft lbs
how to reset service reminder:
/ 1182252435890899
I mistakenly said the drain blot torque was 29ft/lbs, it's 16.5ft/lbs
Can you edit the title of this video to warn about this?
@@ChucksterJax yeah
You are smarter than me. I have been pouring oil all over my exhaust forever my 05 gsxr750 is the same design as my 22 gsxs1000gt.I would just spray it with brake cleaner but it still leaves some that burns off. I will definitely use the aluminum foil trick.
I can't tell from the picture. Is it the top left and top middle to jump it or is it top left and top right??
Top left and top right
forgot to mention the clip pin on the inside. directly below the LEFT handle bar close to where the top 2, 4mm screws are. you have to reach into where the handle bars are. i did my first oil change on my GSX-S1000 GT and I did not know about that clip pin. what a pain in the ass.
Very nice bike! Got jealous so I just ordered one for myself.. 2023 MY. Thanks for all the info guys. I'll be using the Amsoil full synthetic signature series on mine after 500mi. My 2015 FJ09 has never even needed any valve adjustments through 2 intervals.. Good quality synth makes a big difference for sure in my experience!
That’s car oil. Not meant for wet clutch use. Get the metric motorcycle oil.
Did you tighten the oil drain plug with 29ft/lbs??? That's twice as tight as it's allowed by Suzuki. You're lucky if you didn't destroy the aluminum threads of your oilpan.
I can't remember if I did or not, but luckily my oil pan is good, no leaks!
Hoping to know what tire bike lift you used. Looks solid but basic. So many options and opinions.....
This is the one I use now Ruedamann 550 lbs Capacity Motorcycle Stand,Adjustable 9.8"-13.8"W Motorcycle Rear Lift,Motorcycle Storage Lift Stand, Wheel Lift Stand for Sport Bikes,Dirt Bikes,Rear stand, Red a.co/d/63IHAfg
Did you have cam chain tensioner rattle after your oil change? So many have.
Lucky no, hope they do a recall for those affected
Perfect Video thank you so much for the effort!
why the mineral r5000 this time then fully synthetic r9000 next service? curious as im wondering which oil to order . i see the book says recommend ecstar 10/40 r5000 r7000 or r9000 so id prefer to go for the r9000 as its technically the most advanced.
Weirdly all my local suzuki dealers (and honda dealers) stock and use motul oils , im starting to over think oil choices but i just want the best suited for my bike and want it to suit nice gear changes and clutch feel.
oh and also want to see if one or other can address the hot start rattle that seems oil related to either valve shims or cam chain tensioner, hope i can notice a difference as i have this annoyance some of the time
Nice Vid! Looks like the same oil filter my GSX 1000FA uses. Sweet!
most Suzuki bikes use the same oil filter. my SV650 used the same one, my GSX-S750 used the same one, my Katana 1000 used the same one, now the GSX-S1000 Gt uses the same one. the oil filter is also listed as fitting the Haybusa as well as many other bikes. and if you want to know the truth.. I've use one on my riding lawn mower. why not, it fit and it works,, lol
what stand is that,where did u buy it from,Thanks
I didn't remember where I got that one, but I have a different one now that I got from Amazon: Ruedamann 550 lbs Capacity Motorcycle Stand,Adjustable 9.8"-13.8"W Motorcycle Rear Lift,Motorcycle Storage Lift Stand, Wheel Lift Stand for Sport Bikes,Dirt Bikes,Rear stand, Red a.co/d/8oZQdYY
You can buy an oil drain pan with a screen and cover to catch the bolt from auto parts stores, and just take the whole pan to recycle. I got mine from Kragen (now O’Reilley’s Auto Parts). Also K&N and Hi-Flo have filters with a 17mm hex bolt pre-drilled for a safety wire. I just hand tighten the oil filter and use safety wire.
my oil filter is so much easier to reach on my 1000sx and not spit on my headers too. no need to remove the fearing. each bike has is particularity...
This was very helpful. I agree on staying with stock filter.
Where did you order the oil and filter from
Amazon
Nice vid. Thanks. That's one of the reason why i ride à roadster 😉✌️
Hi sir is it possible to sit on seat furture back for much more leaning and sporty riding position or seat always push u forward ? And the second question is , does the bike feel heavy? On twisty roads i like to lean my body out from bike left or right , does it possible on this bike? Im currently using 2022xsr900 and twisty road is very easy with my bike and i can sit on seat furture back and the seat give me permission for it, it doesnt push me front as 2021 mt09 did...what about gsx s1000 gt?
To me doesn't feel heavy. Is a well-balanced smooth bike. The riding position for my height of 5'-8" feels pretty good. The bars they do sit a bit higher than a sport bike. It's meant for touring but has enough horsepower to have fun with it.
I can’t believe you have to use the “jumper” to reset the service interval. C’mon Suzuki! And, pulling that whole fairing?🤦🏽
I’m trying to get my 600 miles in, so I can change mine
Yeah it's pretty crazy!
Hi, you mention you changed to the taller touring windscreen. I have upgraded to the Puig. How did you get the rubber mounting spacers through both the windscreen and dash. I am finding it hard to do both. I get them through the shield or the dash. But, can't do both. Did you find a trick?
I think the spacers just go in the dash and then the windshield on top of them and then the screw and washer
Can someone help with service reset?
I put a link in the description the Facebook group where there's instructions
Its will bee cool yes but they dont approve request... Kinda i am new profile.. Bullshit
Now, you lose your garantee , I have mine new next friday. Greets from Belgium.
Lose garantee from what?
@@cougarlopez If you don't change you'r oil in an official Susuki dealer, lost you garantee. Anyway, it's like that in Belgium en Europe. Asked your dealer.
@@filipdierickx302 different in the US - it's illegal to invalidate warranty just because you didn't do it at dealer. You can do at home as long a you have proof you bought the correct oil and filter
Same as Australia, I always do my own services.
@@spuk87 In Europe you loose your warranty when doing your service by your own. After 2 years, when the warranty is over, you can do whatever you want. If you tighten your oil plug with 40Nm like this guy and shred your aluminum threads you have to pay for your mistakes
I like the tail pack. What brand and model is it? Thanks. Good service video!
Got it from Amazon:
Motorcycle Tail Bag Waterproof... www.amazon.com/dp/B08C7BVMHX?ref=ppx_pop_mob_ap_share
Random question. How do you remove the passenger seat? I have a courtesy bike and cannot find a online owner manual anywhere!
On the left side of the bike there's a place to put your key and turn it then it unlocks the seat
Thanks man, very helpful!
I got the touring screen also. Love it. But I'm thinking of using the stock screen in the middle of summer for additional cooling.
Which brand and model of the touring screen ?
How is the light at night?
For me it's fine, but I think I've heard others complain about it
Thanks, I heard this to.
Very informative video, thank you. Does this affect the warranty at all or what's reported to CarFax? Is that even a thing for motorcycles? For example, if you do your own service on new cars, then you may void the limited lifetime warranty of the power train, according to a new car dealer we bought from.
Doing your own service doesn’t get reported to carfax? Might void warranty but usually it doesn’t unless a failure happens from that oil change (ie: you didn’t tighten the filter properly, engine seized they wouldn’t fix the seized engine, or if you used the wrong viscosity and that caused another failure)
If you keep receipts and documents of what and when you do your own servicing you won't void most warranties
Do you have the panniers? Is there a rubber mount on the pillion footpeg?
Yes there is a rubber mount
@@theaustralianconundrum good to know, thanks!
👍👍
Have you tried adjusting your headlights? Not found one video on this on UA-cam.
Headlights sucks. I had to adjust mine. Two screws on the back side of the headlights. One for up or down the other left and right.
@@01gsx1 Are the adjust screws easy to get to? Had mine set up on a beam setter at the dealers, still far to high and off to the left.
Have you had any issues with the cruise control? Where did you find the jumper info? Did my own oil change at 500 miles. Had the dealer reset it. You can get to the filter with the cap wrench and not have to remove the faring. Nice video!
No cruise control had been working good. There's a link to the Facebook group where it has the jumper info in the description box. I think you can get to the filter with the cap wrench without removing the faring but I haven't tried it
I had to take my bike in to get the cruise looked at after it stopped working. Apparently the rear brake switch was dirty and the brake would remain on even though it wasn’t braking. That prevented the cruise from turning on. Also made it look like I was riding my brake all the time. 😖
Once they cleaned that, no issues.
@@NotYourIngenue I narrowed mine to that as well, still shuts off. They have Suzuki involved, I would say the switch is still wrong or the ECM
I saw another video about failing cruise control on the new Suzuki GT and the rear brake switch needed a little adjustment. Then the cruise control will work fine again.
I have the new Suzuki GT my self and have had no issues about the cruise control.
does the map navigation work good on this bike.
Unfortunately, I haven't been able to get it to work
@@bladecentered2264I use it ask me any question you have
It’s decent. U have to have ur phone on the Suzuki app while using navigation on the screen. It’s not that great but u can get somewhere with it. But it doesn’t re calculate
Hello, pretty sure your supposed to use full synthetic in this bike. Also you can us a little brake clean to get the oil off your exhaust and it'll dry before you can get your fairing back on. Good luck and enjoy the bike.
Page 3-35 in my owner's manual states ECSTAR R5000, R7000 or R9000. They all are recommended.
The recommendations ive seen for it have you run traditional for the first two fills before going to synthetic.
@@RussellGilder 🤣
@@twotone3426 im not joking 🙂 lets the engine wear in a. Little bit more before gonng to synthetic
@@RussellGilder Please provide where you saw this?
I just contacted Suzuki Canada and they had never heard of this... they are looking into it for me and will email me the care instructions and first service details as I am about to do the first oil change on my GT.