3D Printed Terrain! A ROOM DESIGN with Tilescape
Вставка
- Опубліковано 17 лис 2016
- In this vast ocean of garbledy gook, Hankerin talks 3D printed modular terrain, builds out a custom ROOM, and demonstrates weird behavior. Be sure to support ROCKET PIG and their awesome TILESCAPE KICKSTARTER here:
www.kickstarter.com/projects/...
Then hop over to AMAZON and grab a copy of my book! Things!
www.amazon.com/Horn-Sword-Spa...
SKOL! THANKS FOR TUNING IN!
Runehammeria: www.runehammer.online
Join the Shield Wall: / runehammer
Tweet Tweet: / hankrinferinale
FB: / runehammer.games
________________________________________________
The following links are Amazon affiliate links that allow me
to earn a small kickback from your purchase, thanks for your support!
Gear I Use
My Pen of Choice: amzn.to/3VWANrK
Mjölnir Kettlebell (Strength): amzn.to/3MloulG
Paint I use (Honor): amzn.to/41sz3rr
Viking Mug (Beer): amzn.to/3I6X1Sa
Skeletor: amzn.to/42NuCsr
Lair of Knowledge
The Legacy of Mud: amzn.to/3VUwdKR
The Burning Wheel: amzn.to/3MkQmpZ
Retune: A Folded Path Book: amzn.to/44XYWTc
Necronomicon: amzn.to/3MlOzRy
The Complete Chronicles of Conan: amzn.to/3O5aBto
#runehammer - Ігри
everybody. please. stop. trying. to. make. me. spend. money. on. a. 3d. printer.
So damn pretty.
also when you posted that pic of that rolling box I was trying to figure out how you did such a sick carve on foam with inset bricks....i thought i saw 3d printing lines but was like "nah, that's not how hank rolls".
Black Magic Craft I roll all ways
As we all should brother.
Black Magic Craft I know right?
Worth it bro.. I just got mine lol
Once you go 3D printer, you realise there are more options available and your old stuff is still fine.
Great encounter, I am loving some random wind.
"Kind of like a squirrel, humping a pile of mud" I love this channel.
Very cool, can't wait to see this technology 10 years from now
Loafy Molasses you can buy a 3d printer kit and build it in your room and download these tiles, literally.
I love the random wind idea, I'm currently printing some 3d terrain on my cr-10. I love that more than half of this video is watching you just play DnD with yourself. Takes a great imagination to be able to do that
lol hit it with a cinder block! I wish I found your channel years ago when I started crafting! Good shit man!
I haven't laughed this much in a good while, thank you.
HAhaha, trope, *sips as well*
The chimpunk / mud had me in stitches. HAhahaha Then you sped everything up. Love it. ENTERTAINMENT! Going to check out the kickstarter now.
Hank! You're on the wrong side!
OH GOD I'M SO CONFUSED
Backed!!! thanks for bringing this to our attention. I would have missed this. I hope ROCKET PIG hooks you up with all their goodies for life. keep up the vids. Cheers!
great video as always! :)
Also, "Three Guys and a Fox" sounds like a fantastic sitcom.
Thanks again to Hankerin and to all of you who decided to back our project! It's really exciting and there are more fantastic things to come! We are down to 38 hours now...exciting times!
www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
thought I was having a stroke when your voice started going higher and higher
You always make me smile with your good vibes and joy! Keep going ;)
That dice wireframe hand tattoo is dooooooope.
Like the idea with the breeze and the d6 :3 Gonna keep that in mind!
I died at that gag near the end
Where do you get the barrels and crates from?
Nice man! Love your videos!
Was this close to fall asleep then *blim! * new video from Drunkens & Dragons. Well. Will sleep when I'm dead!
Awesome video! May I ask how you made the LED’s in the fire?
tear apart tea lights
There is ONLY 44 hours left in the KICKSTARTER guys!!!!
Tonight I had a plain old screwdriver for the first time since ...... Jesus I can't remember. Love the videos. Congrats on "dee eleven tousand " !
I would do d8 for the wind so it can go all directions and also diagonals.
"Like a squirrel humping a pile of mud"... I did not need that image Hankerin!
Dude, pretty sick...let me ask you...what size is that table top thing-a-ma-jig that your using?
Hedrick Jeff 28 by 36
Dude I think there was helium in your skyriver lol
"I still love dry erase boards" too ;)
how much time does it take to print ONE floor tile and ONE full height Wall tile?
Thank you again!
Nice looking tiles. I was wondering how much filament you used in the set-up that you had?
ask the rocket pig guys...
LOL i like this vid just for the intro!
Hey Hankerin, I was just wondering, do you have any idea how to create a commoner class/character?
5 stats at 10, one at 12, 1 skill with ranks, proficiency with one trade. done lol
Cool, thanks :D
God I feel silly, just got my monster manual today and saw it the character sheet in there...
now how do I convince Mrs.Bungz to get me that 3D printer for Christmas??
Pay extra close attention to her Mistletoe. . . .>_>
If you have the funds, and pay most of the bills buy that shit.
Didn't our collective rpg crafting mind already decide that full 3d walls are an impediment while playing?
edheldude some think so...one of our biggest requests was for half walls and that was unlocked 😉
RocketPig Games I haven't seen the half wall tiles yet, but I've been hoping someone makes them. I wonder how these compare to the tiles Wyloch is producing.
What was the reasoning for this conclusion?
It’s not so much the tall walls but the 1 in tiles versus the 1.25 that Wyloch does that kinda makes me sad. I don’t think it’ll be a bad thing over time and with big enough rooms. You def lose some space per tile with tilescapes due to the fact that the wall takes up tile space.
You went full chipmunk on this one. But now I NEED a damn 3-D printer.
So I took this idea and played with it. The entire level is freezing cold thanks to a layer of Yellow Mold fifteen feet up, which absorbs heat. So when the PCs reach the open section, they have to worry about slipping on the ice and falling to their doom.
I never use walls impedes play of sight,movement,etc.One of the reasons I liked Hankerin's stuff was the open board style play with clutter pieces.O'well,all good things come to a end.Still cool looking though.
Do you have to paint them? Just wondering.
you print them on a 3d printer, so yes.
Fantastic Log they look great raw
I know this doesn't have to do with what you're saying, but did you know that umber hulks, at least in 3.5e, can burrow through stone?
I haven't played D&D but I'm super interested and the crafting looks cool
Hey why do you use a d6 instead of a d8 for direction? N, NW, W, SW, S, SE, E, NE.....8 seems easier.
i us3 a d12 too...clock steez
All I could think about during the first half of this video was how dope it would be to have modular 3D printed rolling boxes. I know when you did your custom rolling boxes video you said it would be too hard of a product to mass produce, but I can't help feeling like with the 3D printed stuff it would be really easy to make a rolling box that feels custom just by mixing and matching a few different elements.
hell yeah! 3d printers will be as ubiquitous as laser printers in 5 years...
what kind of 3d printer do you own? any suggestions of good cheap ones under 500 dollars that would be able to print this and other things?
i dont have one :[
We have Prusa printers in our studio and recently added the Creality Ender 3 for $200...prints our terrain AND Stouthearted Heroes miniatures like a champ! Better than our $1000 machines!
NEW INK ALERT. Looking good. Gonna have to investigate the pricing of this stuff. Also, helium speed is freaking my shit out.
Awesome project and I decided to support the KickStarter. Now.....I wonder if Santa will give me a 3D printer this year. If not, I'll have to grab my hotwire again and get to work.
same here lol
Thanks so much! I can't wait to see the dungeons you all create...and I am STOKED to release our next KickStarter....it's fantastic!
Great videos!
This looks awesome. Not quite familiar with 3D printing, can you tell me how long it took to print what you displayed on the video? Also what type of printer that you used? I have heard that 3D printed models can suffer from printing hiccups like bubbles, holes or weak spots in the final print. Is that a result of the printer, jets or material used or maybe a combination of all three? Would love to hear your opinion.
cmbrando13 ask rocket pig
cmbrando13 there's a bit of a learning curve. If you check the Q&A on the kickstarter there are some printing examples. Our prints have always been super strong and we get lots of feedback from people who've purchased our files and they've always had good prints, too.
3d tiles look awesome. One question. On your website you have The Deadly Architect Prologue, and it was awesome; but is there somewhere where i can get the full thingy? If it even exists. Thanks so much, you are making me an awesome DM, my players have started saying how much better thee games are since i watch. Thanks!
great! The Deadly Architect is not yet fully written...
I shall wait then
I purchased all my 3D printed scenery from HellForge Props. found them on Facebook, really good quality prints too.
can any one help me, i dont know whats the best 3d printer and cheapest that can print any tilescape product like miniature or wall or floor, please some one help me, on whats the best 3d printer for any kind of product from TILESCAPE specifically for tilescape and or other products as well but mainly for tilescape, comment me an answer thank u
prusa, form2
ok thank u ill look it up
Drunkens & Dragons: Play D&D Like a Badass
Prusa i3 mk3 at around $1000 built or Ender 3 kit for $200. Ender prints FANTASTIC with our tiles and our miniatures!
Okay, it has to be asked, because if I think of it, my players may as well: why not just set fire to the fungus with a fire spell? No fungus, no spores. And since there are torches that are lit, the wind is not enough to put out a burning fungus.
jesternario I would then make an Omni directional spore explosion
jesternario also, love your question... classic player
I'd like for you to also check out Fat Dragons ultimate 3d fileseach system has there own way of connecting tiles. It would be great if both of these companies agreed on one type of connector so you could mix and match the sets togather.
Liked for the song at the begining XD
dude... you need to sing that bad ass song as your intro for every show.
How do they connect
lil tabs
The Kickstarter has 11 hours to go and has already unlocked 21 stretch goals which are whole packs in and of themselves!
I can understand the attraction to precision but I really love the feeling and character of your crafted work...I personally would rather play on your crafted stuff instead of generic printed precise stuff...I don't want to be a fuddy duddy though as I see lots of potential for 3D printers.
yeah..I just love variety! I was surprised I liked this stuff too...but mixing it with home built is just great
The secret is to make "hand-crafted" 3D-models.
I subscribed just for the beginning song ❤
can you record one of your games with this. very cool
dont really have enough 3d terrain yet for that as far as 3d printed... will post when we can though!
My hands are 3D printers :)
Never saw this guy before. subscribe instantly for song.
the new Tilescape KICKSTARTER is LIVE now! www.kickstarter.com/projects/rocketpiggames/tilescape-gothic-city-3d-printable-modular-buildin?ref=user_menu
did they tell you what 3d printer they used to make those? they look like they were printed on one of the more expensive ones b/c most of the cheaper ones don't have nearly as smooth prints as what those look to be
Danny M we used a Makergear but we have alot of backers posting pics using printrbot level machines and the terrain comes out great. Lots of pics on our Facebook, forum, and twitter by fans.
RocketPig Games this is one of the first times I've wanted to back this sort of thing even though I don't have a 3d printer yet
Danny M thanks! We actually have alot of backers building their .stl libraries and taking advantage of the amazing deals and exclusives while waiting for their printers.
I am now a backer, and a patron. I already have a fairly large collection of .stl files from you guys and that's before any of the kickstarter stuff I'll be waiting on. I hope you guys go on to expand more and more in the near future
That is awesome! Thank you so much for the support and kind words!
Here's the new one for you, Hankerin! Gothic City! It's our biggest most amazing one yet...and there are Mythos Monster Models!
www.kickstarter.com/projects/rocketpiggames/tilescape-gothic-city-3d-printable-modular-buildin/description
2.0 is a modular building system which allows for the ultimate customization of terrain. With our system you will have total control over your structures. There are several unique possibilities for your floors, streets, buildings (inner and outer walls), accessories, and roofs.
~ Intuitive/fast building single piece tile system
~ Modular vertical walls insert-able walls/posts/columns
~ Insert-able doors and windows
~ Insert-able accessories and decorations (curtains, traps, etc)
Gothic City is the newest completely customizable terrain project from Rocket Pig Games. We provide you with the .stl files and you bring them to life on your 3D printer. It utilizes our Tilescape 2.0 building system which features totally modular building components from the ground up!
~ Universal and Versatile Set will work well with many types of gaming!
(Call of Cthulhu, Iron Kingdoms/WarmaHordes, Malifaux, DnD, Steampunk, Victorian/Gothic settings, etc)
~ The Biggest Lovecraftian/Gothic horror monster miniatures ever made!
~ The most complex roof system available anywhere!
~ Make unique buildings in any shape and size!
~ Only modular system that has authentic medieval overhanging building
floors.
~ The Gothic City Streets Core set also makes an a very good Dungeon tile-set.
~ Gothic City supplies everything you need to create a full medieval or
Industrial Fantasy city!
Hank, why don't you use a d8 for direction? That way you have the 4 cardinal directions plus the in-between ones. 1 would be straight ahead "North", 5 would be directly behind, and 8 would be the "northwest" position. Just a thought
d8 is a devil's dice! for some reason the d6 is just my goto
Don't fuck with the spores, once said a sage man.
"THAT'S HOW WE LIKE IT!"
The picture at 9:39 got me.
Just wait until you invest some time getting to used to 3D software, then you can design any custom... anything you want, that's when the real fun begins
I have been using foam terrain with certain select 3D printed pieces. like door that swing open, barrels, crates that kind of thing. Currently I use thingaverse as my source for all the STL files I have used. www.thingiverse.com/garyacrowellsr/collections/open-forge/page:14
subscribed only because of the coconut subscriba song :D
You talk about the styrene model, but put it behind the slideshow... Anyways, cool use of a 3d printer!
Look at this while I cover it with a slideshow.
Do you have a printer that you recommend?
Number 1 printer for the money right now is the prusa i3 mk2
jo B got it
Creality Ender 3 is only $200 and prints as good and sometimes even better than the expensive printers.
your making me want to re-install my Zbrush brother! ';..;'
I don't why, but I laughed pretty fucking hard while listening to this. sub'd !!
Anyone else subscribed just because of the intro before you even watched the video? XD
I am seriously contemplating funding this kickstarter! What kind of 3D printer do you use, or what would you recommend? I am looking for something that will do the job well, but is also affordable!
It does seem like the Prusa i3 is the #1 printer for the money right now. Out demo tiles were printed with the MakerGear M2 and they are just a phenomenal company that stands by their product. But plenty of people use the Printrbot and love it. So it does all depend on what you are willing to spend.
That was taken from the comments of thier KS of suggested printers
did u print this your self ??
Nope, Rocket Pig sent me the entire thing
When are you dropping your album? . . . lol
right up there with Leonard Nimoy Christmas
you sir get a like just because of the song
Welcome to drunkens & dragons. His videos always have musical interludes and are usually full of crazy, so it's always a fun ride.
jesternario yeah, but this one is one of the best ones I've heard yet
Danny M I wasn't saying it as a negative. I LIKE the crazy and musical interludes! :)
you are a strange strange man. keep it up.
I second that!
To answer your quesstion, I get all of my STL files from printable scenery dot com
With your campaign being done, whats next?
appreciate the question...It's time to tidy up my creative insanity, so I'm going to just be a player for a while, and narrow my foucs down. These last 2 years have been one long sprint, so a little mosey sounds awful nice...
.....made it through the opening bit only to turn it off 20 seconds later....
That intro doh
This dude just played a whole session by himself lol
That almost lasted a minute .-.
Mango Papaya ( ͡ᵔ ͜ʖ ͡ᵔ )
Great video. simple, yet brilliant. Hankerin, be proud!
3D that is so the 90s
I hope Hankerin never discovers TiltBrush/CoolPaintR and similar... the man seems to have enough time sinks, and those are more like creative play than the tools he was describing.
The intro was beyond hilarious
I play dnd every wed
I use maya when making 3D models... but never 3D printed anything
Hankern are you in the game business? 3D Modelling?
yessah!Currently working with Carbon, making Airmech and a great unannounced project for Oculus!
Drunkens & Dragons: Play D&D Like a Badass excellent! ive been trying to break in myself, use blender. any advice? thank you Hankern
learn maya, max, pshop, and make your own game!
I do like the say u did in the video I watch you don't believe in dm screen
If you think that the 3D printed terrain is awesome, you should check out www.heroforge.com - They have a super sweet generator for making character models that you can COMPLETELY customize, from their race, clothing, and poses to mounts! I really liked the video Hank!
3 of teh characters in our campaign had custom herforge minis :]\
the mats are terrible on heroforge. sad but true. unpaintable
I love your vids...and this vid us great