I own multiple MJX Hyper Gos and like them. Lag is an issue with several of them. I also dislike the "drag breaks" or whatever its called when I stop using throttle it locks up sometimes. Helpfuln video. I wish the link for receiver still worked, but great video. TY.
changed my receiver as well, but it's a different model than yours. Still, i went into a shop to buy it and the guy changed it for me on the spot. He told me that it's gonna work standard (without other functions such as switching the lights on/off) until we find the ESC manual so we can calibrate it to the new receiver. So let's spam MJX for a manual or a tutorial on how to configure their E45A ESC so we can get our lights working, brother
Thank for the Info, What do i need to replace in order for the Reverse to be as fast and responsive as Foward? Thats the only thing i dont like about this truck so far, Reverse is too sluggish when it comes to doing jumps and Flips…
Hi, may I ask you something, please? I can see the receiver is not in the original housing any longer. Does this mean to does not fit in there? Is the new receiver waterproof? Even more interesting for me as a noob is how you connected the fans. This receiver has one connector less than the R30, which comes with the car. How did you connect it correctly? Thanks in advance. Edit: I came her searching for "Hyper Go 14210". Now I see it is.a different model. Maybe you can still answer the question about receiver and if it is waterproof and what the measurements are and maybe also how to connect the 14210*s fans as there are 2 of them. Best regards.
I put the wheel extension adapter on mine..made a huge difference. I had to drill the wheel to 6mm and the brass nut in the kit that goes inside wheel and against axel I drilled to 6mm fit perfectly
Hey i started with the brush mjx with the gps but that remote works way better idk y they didnt just keep selling that remote with the bl models cause u just have to bind it to bl but once in awsile ill use the lil remote but ya it sucks if u switch the red wire with the signal wire for lights then it will work with the remote👍
You need a new transmitter. But you should be fine for now. I am happy to here this your first rc car. My first rc was only brushed not brushless so your on a great start. It's around $35 to get a new transmitter but after that you will be doing great because that rc truck is built to last
I have a brand new hyper go 14th scale and shame issues all over YT so they have shipped it with dumbo tx but still the same delay and janky steering. This should work just the same on the hyper go 14209 ?
Can you please measure the opening length of your steering linkage arms? Just received my hyper go and seems to be too much toe out. But the manual doesn't have the default measurements. Thank you!
With the OE radio it cogs at low speed and as soon as you try to get past that it goes too fast, there is no smooth progression to full speed. Replacing the OE receiver asap with a Dumbo X6FG receiver.
You might not see this but I've been trying to get this receiver connected for hours now..i have the bind olug in ch3 amd the esc in ch 2 its blinking i hold the bind button while turning the transmitter on and it just slowly blinks never connects
Hello again, I ordered the same transmitter/receiver as yours. I can't get the transmitter and receiver to communicate with each other. I couldn't quite understand the procedure in the manual. Can you share how you were able to get your's to function?
Put the binding plug in channel 3 then put the ESC in channel 2 you will see the Receiver blinking then hold the bind button down Well turning on the transmitter and they will connect. After put the servo in channel 1 and put the lights in channel 3
I followed your instructions to the T and it connected/worked perfectly! Thank you again for your videos and advice. Being new to the RC game I appreciate your guidance 😎
Ok this receiver/controller has some kool features the old one doesn’t but I had to switch back. Backing up only works good in the reverse setting but still sometimes doesn’t work so I had to flick it a bunch of times and even when it does respond it’s very slow even in the high setting. And my biggest issues was I lost speed, with the old one I needed the wheelie bar and old ladies were impressed 😂 but the new one gets chased by toddlers. 😅 I still like it and will use it to trick people who wants to race me.
HYPER GO H16BM 1:16 4X4 RTR Brushless HELP!!!! I bought this car for my husband, but ordered the wrong batteries. Could you please tell me what batteries he needs to get. I purchased the Zeee 3S Lipo Battery 2200mAh 11.1V 50C Shorty Pack Battery with Deans Plug for RC Car Truck, but the piece to lock the battery in is not large enough. What size does he need to order. Any help would be deeply appreciated!
Remember everything about RC-ing is difficult very difficult because you have know how to solder a new connection like did you can't just order a battery with everything your looking for. They sell a 3s for this rc but you have to put time into looking for it
Connect the receiver as if you already have it paired. Then put the binding plug that came with the transmitter in channel 3... Put servo in channel 1 and the ESC in channel 2 turn on the RC and when you turn on the transmitter hold the bind button on top of the transmitter and we'll holding the bind button down turn on the transmitter and it will pair. Then put the light in channel 3 and done
You can use the transmitter in the video it's sold on Amazon. Remember every transmitter can be used with any RC car and every transmitter comes with its own receiver but you have to pair it to the transmitter yourself and it's not hard at all you just need to follow the directions provided in the box. So you could buy any transmitter you like and it will come with a receiver
Love your videos. Thank you! I have the same RC coming this week. Can you direct me/us on a good upgrade transmitter? The link you had posted is no longer available..
I don't know what transmitter and receiver you have. But it should come with instructions and a bind plug so you have to read your instructions. If you still don't understand how to just look up what transmitter you have on UA-cam someone should have a video on how to
You should not need to calibrate the esc to the new trasmitter. JUst make sure that the throttle is at nutral when you turn on the car and it should be fine. Im using a higher end FLYSKY NB2 with mine and its perfect. With the NB2 you can also adjust steering curve or ad a mix so that the faster the car goes the tamer the steering becomes. The car is amazing and the stock radio is horrible......It deserves a quality transmitter to unlock its full potential.
If yours is all in one then it's Definitely not this rc so if you want to upgrade then you must change out EVERYTHING so you need a independent ESC and servo and Transmitter and receiver so that's a lot to buy
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
I own multiple MJX Hyper Gos and like them. Lag is an issue with several of them. I also dislike the "drag breaks" or whatever its called when I stop using throttle it locks up sometimes. Helpfuln video. I wish the link for receiver still worked, but great video. TY.
Hey I started following you a couple years ago with the Losi mini b. Love the videos good detailed content.
Thank you I really appreciate you saying those kind words
changed my receiver as well, but it's a different model than yours. Still, i went into a shop to buy it and the guy changed it for me on the spot. He told me that it's gonna work standard (without other functions such as switching the lights on/off) until we find the ESC manual so we can calibrate it to the new receiver. So let's spam MJX for a manual or a tutorial on how to configure their E45A ESC so we can get our lights working, brother
Whats the model of the transmitter you have and where did you get it please let me know thanks
Thank for the Info, What do i need to replace in order for the Reverse to be as fast and responsive as Foward? Thats the only thing i dont like about this truck so far, Reverse is too sluggish when it comes to doing jumps and Flips…
Hey man can you show how to connect it
Very helpful thanks for your input I’m still learning 😅
No problem brother
Hi, may I ask you something, please? I can see the receiver is not in the original housing any longer. Does this mean to does not fit in there? Is the new receiver waterproof? Even more interesting for me as a noob is how you connected the fans. This receiver has one connector less than the R30, which comes with the car. How did you connect it correctly? Thanks in advance.
Edit: I came her searching for "Hyper Go 14210". Now I see it is.a different model. Maybe you can still answer the question about receiver and if it is waterproof and what the measurements are and maybe also how to connect the 14210*s fans as there are 2 of them. Best regards.
I put the wheel extension adapter on mine..made a huge difference. I had to drill the wheel to 6mm and the brass nut in the kit that goes inside wheel and against axel I drilled to 6mm fit perfectly
Where’d you buy those from? I’m finding a ton of websites that look untrustworthy (new to the hobby)
@@DocBeasty Amazon
They have a full aluminum CNC suspension available
Amazon has what you need but it cost a little more but you can return it if it's broken and even if it's not broken No Questions Asked
@@MightyistheRCGamer yesssss that's why I use it ..Chinese electronics are cheap but no quality
Hey i started with the brush mjx with the gps but that remote works way better idk y they didnt just keep selling that remote with the bl models cause u just have to bind it to bl but once in awsile ill use the lil remote but ya it sucks if u switch the red wire with the signal wire for lights then it will work with the remote👍
Thanks for the information brother
Just got this as my first RC, was wondering if the steering had to be so twitchy or if it was a skill issue, now I see it isn’t just me!
You need a new transmitter. But you should be fine for now. I am happy to here this your first rc car. My first rc was only brushed not brushless so your on a great start. It's around $35 to get a new transmitter but after that you will be doing great because that rc truck is built to last
Radiolink makes a great inexpensive tx/rx. Rcgs3 is mint. A better rx will fix the twitching
I have a brand new hyper go 14th scale and shame issues all over YT so they have shipped it with dumbo tx but still the same delay and janky steering. This should work just the same on the hyper go 14209 ?
Can you tell me if i need a new esc, or did you just changed the receever and it fits to the stock esc?
Yes the esc will work fine if you bought a new transformer. But only for the brushless version
Can you please measure the opening length of your steering linkage arms? Just received my hyper go and seems to be too much toe out. But the manual doesn't have the default measurements.
Thank you!
I will when I get home from work.... But try to tighten the linkage or untighting
With the OE radio it cogs at low speed and as soon as you try to get past that it goes too fast, there is no smooth progression to full speed. Replacing the OE receiver asap with a Dumbo X6FG receiver.
You might not see this but I've been trying to get this receiver connected for hours now..i have the bind olug in ch3 amd the esc in ch 2 its blinking i hold the bind button while turning the transmitter on and it just slowly blinks never connects
Hello again, I ordered the same transmitter/receiver as yours. I can't get the transmitter and receiver to communicate with each other. I couldn't quite understand the procedure in the manual. Can you share how you were able to get your's to function?
Put the binding plug in channel 3 then put the ESC in channel 2 you will see the Receiver blinking then hold the bind button down Well turning on the transmitter and they will connect. After put the servo in channel 1 and put the lights in channel 3
I followed your instructions to the T and it connected/worked perfectly! Thank you again for your videos and advice. Being new to the RC game I appreciate your guidance 😎
@@rktter All the Thanks go's to you my friend for coming to my channel
Anyone know for to bind the remote and receiver that come with it? Mine disconnected and I can’t figure it out
Ok this receiver/controller has some kool features the old one doesn’t but I had to switch back. Backing up only works good in the reverse setting but still sometimes doesn’t work so I had to flick it a bunch of times and even when it does respond it’s very slow even in the high setting. And my biggest issues was I lost speed, with the old one I needed the wheelie bar and old ladies were impressed 😂 but the new one gets chased by toddlers. 😅 I still like it and will use it to trick people who wants to race me.
Hey bro if your happy then I am happy
The ESC is crap, best to swap it out. I put in a Quicrun 30a ESC and it's response is waaayyyy better
HYPER GO H16BM 1:16 4X4 RTR Brushless HELP!!!! I bought this car for my husband, but ordered the wrong batteries. Could you please tell me what batteries he needs to get. I purchased the Zeee 3S Lipo Battery 2200mAh 11.1V 50C Shorty Pack Battery with Deans Plug for RC Car Truck, but the piece to lock the battery in is not large enough. What size does he need to order. Any help would be deeply appreciated!
hi. Just take a meter and chek the battery space in the car
The battery you need is on ebay trunigy 3s
For some reason your comment was put on hold
www.ebay.com/itm/155422672525
Remember everything about RC-ing is difficult very difficult because you have know how to solder a new connection like did you can't just order a battery with everything your looking for. They sell a 3s for this rc but you have to put time into looking for it
I like your content and stuff I just need to see how it’s connected and how you did it because I have the same rc car and the same transmitter
Connect the receiver as if you already have it paired. Then put the binding plug that came with the transmitter in channel 3... Put servo in channel 1 and the ESC in channel 2 turn on the RC and when you turn on the transmitter hold the bind button on top of the transmitter and we'll holding the bind button down turn on the transmitter and it will pair. Then put the light in channel 3 and done
@@MightyistheRCGamer how long do I hold it down for
You hold the bind button down well you turn on the transmitter
As soon as it binds the light on the receiver will stop blinking. Then take out the bind plug
Good thing I checked here because I bought the same transmitter and thought it would be a simple connection. Thanks!
did the fans turn on automatically when you installed a new one
@@jakeavalos7569 yes
@@MightyistheRCGamer thank you
I have the hyper go 16207 buggy version. What kind of transmitter do I need for that one? I'm new to hobby. How do you link a new one to the receiver
You can use the transmitter in the video it's sold on Amazon. Remember every transmitter can be used with any RC car and every transmitter comes with its own receiver but you have to pair it to the transmitter yourself and it's not hard at all you just need to follow the directions provided in the box. So you could buy any transmitter you like and it will come with a receiver
Love your videos. Thank you! I have the same RC coming this week. Can you direct me/us on a good upgrade transmitter? The link you had posted is no longer available..
Here is a new link to the transmitter and receiver amzn.to/430KK9s
Thank you Sir!😎
@@rktter I really appreciate you coming to my channel and taking time to leave a comment my friend
The throttle doesn't work when i connect my transmitter and receiver together just the steering works
Maybe you have them in the wrong channels
Link to brushless motor, esc please 🙏
The brushless motor is stock.... but you can put any 380 size brushless motor
It has all metal gears in the drive train no plastic
Yes because it's the brushless version also shows it on the box and in the Amazon add
😂🤣I’m over here trying to master the horrible steering on this RC car. But it is way to fast for the quick steering and yeah that lag sucks.
How come mine the steering is now making it go and the throttle is steering
Remember servo is ALWAYS CHANNEL 1 then the ESC is channel 2 just change them and problem solving
Switch your cables on esc. You put motor on channel 1 and servo on 2. It should servo on ch1 and motor on ch2
Amazon have them?
Yes
Could you send me a link to the receiver and the controller? says the one in the description is gone
amzn.to/414NDHb
I sent you a link and it's even cheaper then what I paid
How do we calibrate this esc to the new receiver?
I don't know what transmitter and receiver you have. But it should come with instructions and a bind plug so you have to read your instructions. If you still don't understand how to just look up what transmitter you have on UA-cam someone should have a video on how to
You should not need to calibrate the esc to the new trasmitter. JUst make sure that the throttle is at nutral when you turn on the car and it should be fine. Im using a higher end FLYSKY NB2 with mine and its perfect. With the NB2 you can also adjust steering curve or ad a mix so that the faster the car goes the tamer the steering becomes. The car is amazing and the stock radio is horrible......It deserves a quality transmitter to unlock its full potential.
@@rbroberts61 I don't think he meant calibrate I almost certain he meant how do Bind the new transmitter to the receiver
You didn't have to change the transmitter there is a adjustment nob turn it down all the way
On the new version on mjx 16208 i have throttle trim an the lag it’s gone
It's still Garbage
The original transmitter doesn't let the servo work correctly and that is even worse than the lag
@@MightyistheRCGamer maybe your I right, but is a cheap car..I put last week a gyro Ets mine and it’s work great
@@make4all2000 you need to get rid of that transmitter
@@make4all2000 I know it's cheap but it so much better. I don't even use mine anymore I put it back in the box
Can you show how to upgrade the motor and esc.? My esc is built into the receiver and steering
If yours is all in one then it's Definitely not this rc so if you want to upgrade then you must change out EVERYTHING so you need a independent ESC and servo and Transmitter and receiver so that's a lot to buy
@@MightyistheRCGamerhi, why also change the servo? Transmitter and receiver is enough no ?
@@anisghil the servo is great the transmitter is making it work incorrectly.
my h16bm is squeaking while driving, have you encountered the same issue?
@@LuckyChuckle no not yet