After changing the esc is the procedure same to switch the power mode if i use a 3s battery ? Or does it remain the same as how its done for the original esc
@@simpleomi8151 no the hobbywing / lc racing esc is completely programmable and does not need any procedure to unlock power.. If you set it to high power options it will remain at that.
Can u also suggest which servo upgrade i can do which will give me better steering as i have changed all the parts to aluminium parts and steering has become a little sluggish. Servo which will fit the body base. I had ordered one but its too big
@@simpleomi8151 servo upgrade need to check which servo will fit properly because it's not standard size servo... On ebay and aliexpress you can find 14210 metal upgrade servo which should fit and work better.
Bro im so happy i found ur channel i have recently got the 14210 hyper go and i am new to the rc hobby. And i have this problem where my rc car wont turn off until i disconnect the battery the fans keep running and the light in the esc goes off but after a while it turns on automatically im thinking of changing the esc. Could u advise
@@simpleomi8151 hi, thanks for watching. If the esc does not turn off from the switch then may be the switch is damaged or something is wrong with esc. But i am not sure if the new batch of esc on mjx require battery disconnection for power off. If the throttle and reverse working correctly?
@Wyatt_9 if you change the esc you can adjust the punch level and set it to level 9 for more power. It does heat but if you install the fan on it it keeps it cool too. You get more throttle control and better handling with the new esc.
You can use a program box or hold the set button near esc power switch and select the punch mode and adjust the level... Refer to the hobbywing esc manual if you buy it
Hello, Great video! Is it possible to run Hobbywing Quicrun WP-10BL60 G2 with the stock motor on the H14BM? If so, i am assuming install is the same process as your video describes. Correct?
@@shmelie yes once you drive it initially you'll realise the stock esc is not good for jump and mid air control due to the lag and initial high end punch. After replacing the esc it's a lot more comfortable to control
Hello dude, good info, was just looking for a program card for these but I guess bad luck. Do you have any experience with the Surpass Hobby ESCs by chance? Are they any good?
Hola...! Cuál me recomiendas el hyper go 14210 o el 14209 dicen que el 09 se controla mejor... Y por otro lado... Donde podría conseguir ruedas de asfalto para estos modelos y que tipo de giroscopio le podemos poner? El Gyro G3 del 14303 le valdría?
@brauliofletes5853 yo el 209.. y mismo jajaja primer día.. y comprando piezas... Además los tornillos los tengo todos doblados.. he tenido que pedir también y cambiarlos.. y luego apenas gira de un lado.. he visto por internet..y pone que es por desgaste de nosequé cosa del servo... Pero ni idea como pedir eso o cambiarlo.. no me dio tiempo ni a ponerle la 3s jajajaja ahí lo tengo cogiendo polvo xD
Thanks for making the video, I was looking to see if the stock 35A ESC on these MJX Hosim trucks are programmable but there's no information around to suggest they are. I will upgrade mine. On a good note though, the Brushed 35A ESC on these MJX Hosim models don't have throttle delay and is very capable and smooth ESC to use.
Yes unfortunately those mjx esc are locked even though they can be programmed. I don't have a brushed esc but thanks for the information wish it was the same with this esc too. Thanks for watching
I have the 14302 which is the same thing (just a different body) I haven't noticed any lag on throttle on that but definitely on the 14210 there is, I have one too.
bhai, the ESC you are referring to is about 4600 rupees. Do you think it is worth to spend that much money? It would be great to decide and spend that money😀
Check the same esc on RC Mart you'll get it for around Rs.2000 ..link is in description. Stock esc is also good in terms of power just that it's throttle response is dull
Hey rakish can you give any social media so that I can contact you I need to repair my Flysky i6s I had blown it up I hooked a 2s battery to it and it doesn't work anymore
Thank you for the detailed video on the ESC swop, much appreciated.
@@zarccarsandothertoys.572 glad to hear that.. Thanks for watching! 👍
Thank you for posting this, I’m surprised there aren’t more videos about this issue given how popular the car is
@@dafug42 thanks for watching 👍
@@RakishRcI have the exact same issue so I’m going to replace my ESC now too
Once you change it you'll notice the throttle response is much better and improved
After changing the esc is the procedure same to switch the power mode if i use a 3s battery ? Or does it remain the same as how its done for the original esc
@@simpleomi8151 no the hobbywing / lc racing esc is completely programmable and does not need any procedure to unlock power.. If you set it to high power options it will remain at that.
Can u also suggest which servo upgrade i can do which will give me better steering as i have changed all the parts to aluminium parts and steering has become a little sluggish. Servo which will fit the body base. I had ordered one but its too big
@@simpleomi8151 servo upgrade need to check which servo will fit properly because it's not standard size servo... On ebay and aliexpress you can find 14210 metal upgrade servo which should fit and work better.
@ thank you so much for replying yes i will try on aliexpress. But if u find one could u please let me know. Thank you🙏
Bro im so happy i found ur channel i have recently got the 14210 hyper go and i am new to the rc hobby. And i have this problem where my rc car wont turn off until i disconnect the battery the fans keep running and the light in the esc goes off but after a while it turns on automatically im thinking of changing the esc. Could u advise
@@simpleomi8151 hi, thanks for watching. If the esc does not turn off from the switch then may be the switch is damaged or something is wrong with esc. But i am not sure if the new batch of esc on mjx require battery disconnection for power off.
If the throttle and reverse working correctly?
@@RakishRc yes the throttle and reverse is working properly
is 60a esc fine?
Yes
Love the vid, having the same issue. But does that new esc effect the speed, and acceleration? And does it overheat, thanks!!!
@Wyatt_9 if you change the esc you can adjust the punch level and set it to level 9 for more power.
It does heat but if you install the fan on it it keeps it cool too. You get more throttle control and better handling with the new esc.
@@RakishRc How do you adjust the punch level?
You can use a program box or hold the set button near esc power switch and select the punch mode and adjust the level... Refer to the hobbywing esc manual if you buy it
@@RakishRc will do!!! Thanks for the information
Hello, one question only, please: this new ESC you talk about , the LC racing 35amp ESC, allows use of 3 S batteries ?
Thank you !
Yes
Hello, Great video! Is it possible to run Hobbywing Quicrun WP-10BL60 G2 with the stock motor on the H14BM? If so, i am assuming install is the same process as your video describes. Correct?
@@travisc46 hi, yes you can install the 60amp esc. Process is the same 👍
Hello do you know if there is any difference at all between the HW 16bl30 and the lc racing 35 amp? Thanks
Ty im waiting on my truck to come but also prob gne need to pgrade this eventualy
@@shmelie yes once you drive it initially you'll realise the stock esc is not good for jump and mid air control due to the lag and initial high end punch. After replacing the esc it's a lot more comfortable to control
Can the new esc support 3s well?
Hello dude, good info, was just looking for a program card for these but I guess bad luck. Do you have any experience with the Surpass Hobby ESCs by chance? Are they any good?
I have one 60amp esc in my kyosho rc boat. It's actually good and it has option for programming with the program card.
where can i buy the esc in india
The acceleration and reverse controls are reversed on my receiver? Any clue what it can be?
Nevermind, wires were swapped around. Weird, I followed your steps too 🤷🏽♂️
@@rarebanana Mjx radio does not have channel reverse switch...outer two motor wires need to be swapped
@@rarebanana lol
Hola...! Cuál me recomiendas el hyper go 14210 o el 14209 dicen que el 09 se controla mejor... Y por otro lado... Donde podría conseguir ruedas de asfalto para estos modelos y que tipo de giroscopio le podemos poner? El Gyro G3 del 14303 le valdría?
Cuál compraste, yo compré el 14210, y ya mandé pedir piezas por qué le di en su madre 🤣
@brauliofletes5853 yo el 209.. y mismo jajaja primer día.. y comprando piezas... Además los tornillos los tengo todos doblados.. he tenido que pedir también y cambiarlos.. y luego apenas gira de un lado.. he visto por internet..y pone que es por desgaste de nosequé cosa del servo... Pero ni idea como pedir eso o cambiarlo.. no me dio tiempo ni a ponerle la 3s jajajaja ahí lo tengo cogiendo polvo xD
Quick question yet again man, I've got the X6FG Trans./Rec. but I don't have the 75% or 100% full throttle choice? What's the difference if I may ask
The stock radio has option to adjust throttle power at 75 & 100 % but on dumbo rc radio you can use the throttle epa knob to adjust the throttle band.
@@RakishRc Muchos thank yous Señor
Thanks for making the video, I was looking to see if the stock 35A ESC on these MJX Hosim trucks are programmable but there's no information around to suggest they are. I will upgrade mine. On a good note though, the Brushed 35A ESC on these MJX Hosim models don't have throttle delay and is very capable and smooth ESC to use.
Yes unfortunately those mjx esc are locked even though they can be programmed. I don't have a brushed esc but thanks for the information wish it was the same with this esc too. Thanks for watching
Thank you for this! I got a new receiver for my HBX but the response is still trash, you literally can't go slow, not proportional at all.
what about power output. 45Amp vs 35 Amp?
and what about 10BL30 because i cant find LC35a in my country
45amp stock esc is more powerful but the 35amp hobbywing esc is more balanced.
Search for hobbywing 30am esc it's the same
@@RakishRc thanks
Superb
Is it not a kind of downgrade if u go from a 45a esc to a 30/35a? Does the motor have the same power still? Is something getting hotter than before?
Stock ESC not good?
Good but throttle response is not good. So because it's not programmable to get better handling esc can be changed
Anyone know if this esc problem is on the 14303 Citroen? havent seen any reviews or vidoes with people owning the citroen mention this problem.
I have the 14302 which is the same thing (just a different body) I haven't noticed any lag on throttle on that but definitely on the 14210 there is, I have one too.
Bought the same
bhai, the ESC you are referring to is about 4600 rupees. Do you think it is worth to spend that much money? It would be great to decide and spend that money😀
Check the same esc on RC Mart you'll get it for around Rs.2000
..link is in description.
Stock esc is also good in terms of power just that it's throttle response is dull
Can i run 35am esc with 4400kv motor and larger tires 3s
Too much clogging in motor, better change that also
just bought ine: these things are extreamly fast--- to fast for kids;
Hey rakish can you give any social media so that I can contact you I need to repair my Flysky i6s I had blown it up I hooked a 2s battery to it and it doesn't work anymore