Cutting segments on a band saw. Yes a band saw.
Вставка
- Опубліковано 26 сер 2024
- Segmented turning is an art unto itself. Endless design possibilities exist. Not having access to expensive table saws, I modified a great idea to adapt to my band saw. When constructed carefully, Jerry Bennet's Wedgie Sled fits the bill. Learn more about his sled concept here:
• Segmentology The Basics
Learn how to build it here:
• Making The Wedgie Sled
NOTE: The sled in my video has been "scaled down" to 8"x10"
to use on my 14" band saw. Other than that, no modifications were made to the design. I get great results cutting my segments using this sled.
Where were you 20 years ago when I needed help? Your video is to the point and a novice can follow you. Nice job!
I'm glad things worked out, but I have to tell I was LOL with the frustration you went through. We've all been there! God for you!
Pretty cool thanks for posting. I have also had good results using a sled with a single fence like Jerry's design with my band saw.
TY. I have since made a good stop using a threaded rod. Excellent results.
I am using the Rockler Disc Sander Angle Jig on my 14 “ rikon with fantastic results.
Great video. Thanks for sharing. 👍🏻😃
Good video. Thanks for posting.
Thanks my boy always seen on a table saw have a very expensive band saw so there you go nice video thanks David U/K
Can I buy a pre made jig for a bandsaw?
I dont know of any, these are easy to make.
D ont forget to use a soft stop to get all the segments the same length
Fantastic jig, I have a 10" Delta Homecraft Bandsaw ( 1953 imported from the US One piece at a time) and it has no mitre slot, would it be OK to use the front of the table ??
Thank you for any help
How do I know how far from the band saw blade I should place my stop block?
It depends on the overall O.D. you are going for with your ring. The larger the diameter the longer the length of your segment. Here is one good online calculator....www.woodturnersresource.com/extras/projects/segmentcalc/index.html
I think you got it now keep going
you don't no what you are talk about
Great video. I also have a 14 inches bandsaw. What are the dimensions of yours
14" with a 16" square table. Take a test cut with a 1' or longer piece of scrap to ensure the slot is dead nuts parallel to the blade
make a new video all i can see is your arm
6:18 ... Screwdgie mowadgies ... I searched Amazon but their always out of stock, where do you find screwdgie mowadgies?! 🤣
Like the video! ... and the narration...my mitre fence is waaay cheap shitter than your shit fence... it has slop at the start and jams just past the blade lol. I’ve made a jig, will be posting results on my YT soon lol. Cheers man!!
OLA MEU CARO AMIGO, VENDO SEU VIDIO, APANHEI TABEM PRA TER O CORTE IDEAL E CORRETO NO MEUS SEGMENTADOS.
__ GOSTARIA DE TE AJUDAR PELO QUE APRENDI SOZINHO.
__ COM ESSE TRENO MAIS CONHECIDO COMO JIG DE CORTE PARA SEGMENTADO.
__ O SENHOR NÃO PRECISA MUDAR PE POSIÇÃO PARA O SEGUNDO CORTE.
__ QUANDO FIZER O PRIMEIRO CORTE , SIPLISMENTE (NÃO) MUDE A MADEIRA DO LADO DE FORA DO TRENO E SIM , SOMENTE ENCOSTE DO OUTRO LADO , ACERTE O TAMANHO E CORTE ,, SIMPLES ASSIM,,,,, NÃO PRECISA PEGAR A MADEIRA E COLOCA-LA DO OUTO LASO. SO ARASTE NO SEGUNDA REGUA, ACERTE O TAMANHO E CORTE .
FORTE ABRAÇO.
RODOLFO POR BRASIL ESTADO DE SÃO PAULO NA CIDADE DE JAÚ.
ABRAÇOS
Obrigado pelas suas palavras gentis!
Uma pena, o i melhor do vídeo ficou mostrando apenas teu braço e mão.....
Very simple your bevel is not right.
Yes I know. Product of best effort. A jig makes the bevel right.
Thumb down,, to much waffle, bad camera angle, see the bandsaw , no , I see arms ,, I watched 11 minutes ,,Sorry
We're not for everyone, but we don't try to be
Not that it will make any difference, but I didn't finish watching because of the language. Might have been a good video otherwise.
You are to sensitive for this world! Try another one?
I couldn’t watch it either, not for the language but because he don’t know how to tighten up a his miter in the slot. Probably not going to learn much from him. Lol.
First, not watching a video because of language is just racist. I often watch a video not understanding a word the person says.
Second, he started right st the beginning he's not a woodworker and made due with what he has. It's a learning experience for him, and he'll learn the adjusting screws for the miter slot are on the wrong side. Try doing metal work with tools you have on hand
@@moradisslessadat7171 do you know what the definition of racist is? if not then please read the following...... racist /ˈrāsəst/
noun
1.
a person who shows or feels discrimination or prejudice against people of other races, or who believes that a particular race is superior to another.
So if you have read this and you have gained a little intelligence then perhaps you want to re think that statement. I am offended by rude and vulgar lanquage but in no way shape or form does that mean I am racist. Educate yourself before you make comments is always a good decision.
@@thedanhendersonfamily6013 he wouldnt gain intelligence by reading your statement, he would gain knowledge. No one can teach intelligence.
That said, I agree Moradiss is obviously one of those who would shout racist if you mention muslim, when muslim is a religion not a race. Or Irish, which is a nationality, not a race. But then Moradiss is an idiot!