When I bought my 460 I had the dealer install the same spikes, soon after I did the same with my little 260. Makes cutting thick bark trees a little easier.
Just got my new 462 yesterday and this is the first upgrade i have to make for sure . Come on sthil ya could have put better dogs on a 70cc pro series saw , i mean it's the same one they put on the home owner series . LOL . Anyways thanks for the video and the part #'s , i'll be heading to the dealer in the morning .
When I bought my 460 a decade ago the dealer quoted me a price for the saw with a 20 inch bar. I told him to mount a 25 inch bar and the large dual felling spikes for the previously quoted price, and they did. You cant normally haggle in dealerships, but a lot of times you can add things for free.
Oh I got two dual dogs and roller catcher kit free, around here they normally just don't have that already on this all that's all I was saying. Thanks for watching.✌
It’s definitely a different frame of mind in the Midwest. I got laughed at for having a 24” bar. No, not all of the trees I cut need a bar quite that long, but I sure do enjoy not having to bend over constantly while bucking.
You should try the 1122 hardwood dawgs, if you have not already. They are the same as the 1128's with a shorter bottom spike, same clearancing issue on the outer dawg.
Very true you do lose a little bit of bar length, but I normally run at least a 24" bar on saw 70cc or larger saws, I don't like bending down anymore.✌
You would think that if Stihl made the saw and Stihl made the dogs for the saw...they should just bolt on. Are these dogs made for the 661 and just machined enough for the 462? I’ve seen some folks mention doing that
There's a smaller outer dog the fits the non wrap cover, but you can't mount a roller catcher. The wrap bar cover is larger and fits up with the outer dog without any grinding. I'm thinking Stihl just assumed no one would mount up the larger outer dog with the roller catcher. Makes no sense to me.
How far the bottom of the dawgs are from the bottom of the bar/chain yes. My 395 had a set that was 2 1/4 below the chain and it created too much leverage and stalled the chain in the cut. Built a set at about 1 1/2 inches and they work amazing.
@@307j.o.a.t9 Just checked looks like 2" from the bottom of the bar. I have found that the geometry plays a big role, the stock dawgs on the 395 are not the best IMHO.
They can. These are for large trees with big root flares and thick bark, out west type of felling. There is a smaller set available, but without the roller catcher, though you could do some drilling to make a roller fit, I'll track down the part # and get back with you. Some are using the 064 spikes as well, here are the part numbers for that. 1122 664 0505 1122 664 0500 1122 656 7705
Did you end up putting on another roller chain catcher? I took a screenshot of your video where you were holding up the directions for the roller chain catcher. It says 1122 650 7702. 1122 650 7700 according to my Stihl dealer isn’t even a part number. I did see 1124 650 7700 is a Stihl part number and is also a roller chain catcher.I put on the same one as you have in the video and the roller part won’t actually roll (as you said it’s too wide)...I have a lathe though and could shave it down a bit. I’m assuming it’s actually suppose to be able to actually roll on the shaft?
Those are the small spikes without the roller chain catcher, the roller chain catcher is a must in my opinion. These were the correct felling spikes, everyone has the same issue, you just have to clearance the inner part of the spike just a little bit. I didn't have to drill anything.
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Sweet upgrade. 💯💯💯
When I bought my 460 I had the dealer install the same spikes, soon after I did the same with my little 260. Makes cutting thick bark trees a little easier.
With the amount these saws cost both sets should come in every box.
Very helpfully. Thank you
Glad it was helpful!
Just got my new 462 yesterday and this is the first upgrade i have to make for sure . Come on sthil ya could have put better dogs on a 70cc pro series saw , i mean it's the same one they put on the home owner series . LOL . Anyways thanks for the video and the part #'s , i'll be heading to the dealer in the morning .
It's a worthy upgrade, the stock dog is a joke.✌
What brand snap ring pliers do you have?
When I bought my 460 a decade ago the dealer quoted me a price for the saw with a 20 inch bar. I told him to mount a 25 inch bar and the large dual felling spikes for the previously quoted price, and they did. You cant normally haggle in dealerships, but a lot of times you can add things for free.
Oh I got two dual dogs and roller catcher kit free, around here they normally just don't have that already on this all that's all I was saying.
Thanks for watching.✌
It’s definitely a different frame of mind in the Midwest. I got laughed at for having a 24” bar. No, not all of the trees I cut need a bar quite that long, but I sure do enjoy not having to bend over constantly while bucking.
It's definitely nice to stand up and buck. But with light 50cc saws I won't run anything longer than a 18" bar, zips limbs off instantaneously.
Had to clearance mine to
You should try the 1122 hardwood dawgs, if you have not already. They are the same as the 1128's with a shorter bottom spike, same clearancing issue on the outer dawg.
I personally prefer the larger dawg, if these grab too much, or I get too much leverage I will definitely give them a shot.✌
Looks good, bummer is you loose a little bar length,which is a bummer with a 20".
I've got that same torque wrench 😂
Very true you do lose a little bit of bar length, but I normally run at least a 24" bar on saw 70cc or larger saws, I don't like bending down anymore.✌
Hi, thanks for the video! Could you add all part numbers in the video description bellow please?
Many Thanks!
The bench your working on is that a custom made one or is it something that was repurposed?
It was repurposed.
You would think that if Stihl made the saw and Stihl made the dogs for the saw...they should just bolt on. Are these dogs made for the 661 and just machined enough for the 462? I’ve seen some folks mention doing that
There's a smaller outer dog the fits the non wrap cover, but you can't mount a roller catcher. The wrap bar cover is larger and fits up with the outer dog without any grinding. I'm thinking Stihl just assumed no one would mount up the larger outer dog with the roller catcher. Makes no sense to me.
Nice set of dawgs!! Would love to see them put to work!! How far below the chain is the tip of the bottom tooth?
I'll have a video of the saw in wood soon! Are you asking how far the bar is from the bottom of the bar/chain?
How far the bottom of the dawgs are from the bottom of the bar/chain yes. My 395 had a set that was 2 1/4 below the chain and it created too much leverage and stalled the chain in the cut. Built a set at about 1 1/2 inches and they work amazing.
@@307j.o.a.t9 Just checked looks like 2" from the bottom of the bar. I have found that the geometry plays a big role, the stock dawgs on the 395 are not the best IMHO.
Ive heard that the big spikes make it harder to move the saw around a tree because they stab into everything easier.
They can. These are for large trees with big root flares and thick bark, out west type of felling. There is a smaller set available, but without the roller catcher, though you could do some drilling to make a roller fit, I'll track down the part # and get back with you. Some are using the 064 spikes as well, here are the part numbers for that.
1122 664 0505
1122 664 0500
1122 656 7705
STIHL N 1. 💪💪💪
no way.
Hi, can you give me the stihl code number for the double spike?
Many thanks and bye from italy
Did you end up putting on another roller chain catcher? I took a screenshot of your video where you were holding up the directions for the roller chain catcher. It says 1122 650 7702. 1122 650 7700 according to my Stihl dealer isn’t even a part number. I did see 1124 650 7700 is a Stihl part number and is also a roller chain catcher.I put on the same one as you have in the video and the roller part won’t actually roll (as you said it’s too wide)...I have a lathe though and could shave it down a bit. I’m assuming it’s actually suppose to be able to actually roll on the shaft?
I just cut it down, my dealer gave me the 661 roller, so yes it was too wide. It's is supposed to spin freely.✌️
@@Andyshine77 ahhh thank you! I’ll turn it down a bit on the lathe. Wasn’t sure and and wanted to ask ☺️
Who makes those dogs?
Stihl.
Thanks
Link for the dogs please
You have to order them from a dealership they're not available online
1142 664 0501 is the perfect fit. You don't need to drill or saw anything, just screw it on motorsaegen-portal.de/viewtopic.php?f=1&t=102053&start=40
Those are the small spikes without the roller chain catcher, the roller chain catcher is a must in my opinion. These were the correct felling spikes, everyone has the same issue, you just have to clearance the inner part of the spike just a little bit. I didn't have to drill anything.