Pelican Catch Trolling Motor and Pedal Steering
Вставка
- Опубліковано 2 жов 2024
- Pelican Catch 120 and Minkota 30-30 trolling motor turned into a motorized kayak with foot pedal steering.
Links:
• Kayak Transducer
• LiFePo4 Trolling Batte...
• Kill Switch for Trolli...
and just for fun: • A Good Day Fishing on ...
Best trolling for the catch 120 I've seen so far. I'm going to do the same with mine. Thank you.
well done i have this kayak and i was looking to spend with new motor and all around like $300 to do another project i was looking at. you sir, are a legend, this is definitely the best way to do it, leaving everything fully intact as well, enabling disassembly in case you ever wanted to take it off, this is perfect, i work in a sheet metal shop for the air force and i have access to every tool imaginable, and i can easily make this, i just needed a better idea, thank you for uploading this, and thank you for taking the time to figure this out. what a legend. well done
Well I had to give a thumbs up to your comment, LOL. But seriously I'm so happy to hear how people are turning their kayaks into motorized kayaks it's great. Had my note for the first time this year yesterday, I'm up in Canada so the ice is just off the water. But with a Lithium-Ion battery,. man is this thing sweet. I'd say good luck for doing yours but I'm sure you don't need that.
I have the same kayak those are some great ideas and an awesome video thanks for sharing!
Love the simplicity of it all. I just bought the Catch 120 last fall, then almost immediately injured my hand, so I've only had it on the water a couple of times. Looking forward to trying some fishing from it this year! I think a trolling motor would be a great upgrade.
Thank you for the info! I have been wondering how to do something like this and now I have it! Great ideas!!
Hi, its Dean met you today at canadian tire, love you're idea.
By far best diy upgrade I’ve come across. Thank you!
I like your setup !
Great video! Try building a pwm speed controller, it is much more efficient and will save you battery.
We'll have to look into that. With the lithium-ion battery I can go all day long right now so I don't run out of juice.
I think I have a project for the winter
I agree. Did the pwm for under $30. Less wires. I got a harbor freight deep cycle 35 ah. I can go 3 hours (all my back and butt can take ), no paddling (ugh) and battery barely drops below 100%. Best upgrade I did..
Thank you! Been trying to figure out how to get trolling motor on my catch 100
I built the mount for my 100 and it works great. With no added holes which is amazing. I found some 12v32ah batteries for cheap and its perfect for evening out. Thank you for posting your build it helped me tremendously.
Ahaha I havent but ill keep that in mind!
Dude your awesome. Inspiring. Ty. Will be attempting my own build this year with your guidelines on what you figured out. Ty again.
How awesome! Love seeing other MacGyver minds at work!
Great Idea for the Transom design. I have a Pamlico Wilderness, that used to come with an OPTION to get a Motor with a VERY simiar FOOT steer and speed control and cost about $1600 with the motor, back in the 90s. I have a Pamilico know and am going to use your Transom design and reset this one up. Great Fishing machine to be able to get wherever you need....even in Strong Currents.
this is a lot less than $1600, and you can do 4 mph on the lake, so , not too shabby
A very smart design! Yet incredibly simple. I saved this video in case I do want to convert to power someday.
I use both motor and paddles. But the motor sure gets you where you want to go in a hurry
I'm currently adding a motor to my catch 100. I love ur transom design. I'm guna use aluminum and thick cutting board mine. I went with coated cable ran thru ice machine pex line just to keep the cables from getting hung up on stuff. Awesome video Sir!
@@SidZork01 wats the top speed?
@@SidZork01 thank you for the quick reply. I subbed to your channel. Have a good day sir
Thanks. se123 definition of boat is "a hole in the water into which you pour time and money."
I already asked you a few questions about this setup and now I'm at the point where I'm going to set mine up like yours. I LIKE EVERYTHING ABOUT YOUR SETUP and I have the exact kayak. one last question what did you use for the wedges to go into the handle so perfectly? Just the same 1×1 tube cut to fit? I figured if I asked I could save me some time.
yes, I took the same 1"x1" Al tube, about 3-4 long. Used a jig saw, cut it diagonally, from one corner to the other. End up with 2 wedges. Then just drilled small hole on the inside of each wedge and screwed it onto the main transom support. Put the transom into the handle, put it where I wanted it to be, with the locking screw at the front and from that put in the two wedges. Use a marker to get the exact spot, take it out and screw them in. Put electrical take to reduce the risk of sharp edges on the wedge once all done.
@@TonyBrunelle1 AWESOME Thanks again!!
It's not the taking part that worries me. I'm great at that. Its the 1-2 pieces I have left over when finished, that always stumps me.
I don't go bass fishing 😅
Better not ever see them in my area either
Iv looked everywhere for a carabiner like the one for your tilt want to use for R+L hand pull controls I don’t have foot rests on my PWR 100 you remember were or what you got them. Thanks again👍🏻🍻
Pretty sure I got it at home Depot, I hope that helps
How do you pin the motor down while running it. Or is it heavy enough to stay down on its own with it wanting to come up
It stays down when pushing the yak forward. Even works in reverse
Those "clips" and "gizmos" are called pad eyes or rigging loops ;)
Sub'd just for your ingenuity! I'm about to get my first kayak for my future rockhounding adventures. Definitely going to use a trolling motor. Have you ever considered hooking up a small solar panel to yours? I plan to use a 50 watt flexible panel that is currently on my van with the kayak motor & battery.
I have used the lithium iron battery a few times now and I absolutely love it. How to charge I just plug it into the house so I can't really tell you about a solar panel
Do you have a drawing / listing of the materials and dimensions of the mount - for instance length of mount, with 3 one inch square tubes. Thanks for your diy project,
Dave
What did you use to get the eye bolts on the shaft of the motor.
Where did you get the split ring hangers used for the steering attachments on the motor shaft? Can't find them anywhere...
Got them at home Depot. But now I have trouble finding them as well. My buddy just simply took a about a 8-in long stainless steel screw. Put it right through the shaft, bolted it on and then put rings on the end. It does the same thing so you know being innovative.
Super inspiring! Thank you for sharing.
Can you link me all the tools and materials you used to do this? Thanks!
Amazing. Well done sir! You made me want to upgrade to the Catch and try to replicate your build ! ... I'm jealous
Go for it, it's actually not that hard to do, just one step at a time.
Something ventured, something gained. A one-of-a-kind machine. Great work Tony.
Ingenious…Wallace and Gromit don’t have anything on you…
Lol
Great Rigging wen you mention smaller battery is it a lawn and garden type?
You need a Lithium-Ion battery, Life-Po4 . I have a 100 amp hour battery and I can go for 8 hours lol, and 80 amp power would probably be five six hours
Awesome set up 👍👍
which cables did you use to lengthen the cables?
I'm not sure exactly what I where I got it but I think I simply used an electrical cord there is heavy duty light duty etc right so you get something that's going to handle the amperage
Do you have a video of how you constructed your control box?
Sorry I don't have a video on that. Get a closed plastic electrical box from home Depot, the control unit on a trolling motor is just a small little motor ,you'll see you can drill a hole for the control knob drill another hole to get the wires to exit the box.. I used waterweld to hold the control unit up against the top of the control box and I plugged the hole where the wires come out again with waterweld. What's that waterweld Hardened it's going to take dynamite to get it off.
Simply take pictures of all the wires on the control unit when you take your trolling motor control unit apart. That way you can simply reconstruct it and seal it inside the electrical control box. One thing I did was take a 60 lb magnet and I screwed it glued onto the bottom of the box and then I put a metal plate on the kayak so it's on,it doesn't fall.
I hope that helps, it's actually very easy and on the electrical box if you screw they are a bout 5 oR 6 bucks buy another one and start again. Good luck
Impressive set up! Are you using lithium batteries? what kind exactly are you using? Thx mate
@@SidZork01 Yeah those heavy batteries get annoying very fast. I’m currently looking for a lithium battery hundred amp. Which brand did you get? Thx mate
@@SidZork01 i think most lithium batteries are made in china anyway.
@@allans7281 check out Dakota Lithium batteries... twice the power, half the weight and 11 year battery warranty!
Nice job on the transom design! I'm going to get my son a Catch 100 so finding your design comes at a great time. May I ask where you sourced the aluminum tubing? Thanks in advance!
Home depot and or Lowe's, 1" by 1" hollow square tube
Nice job.
how did you registered it .not that you instslled the trolling motor?
You Little Genius You!
LOL
Do u half to get it registrar when u have the trolling motor on it
yeppers great video, and thanks for sharing, dead mans switch
If you have to reverse it, how do you fix the motor from tilting up?
This is so awesome! Thank you sir. I love your ingenuity.
just 1 question, I dont think you mentioned, is this 1" Square tubing aluminum, or is it 1" solid stock aluminum,
It is tubing, it's Hollow and it's plenty strong. I have a 30-30 Minn Kota but if I were to do it again I might upgrade to a little stronger motor.
Great job! Thanks for sharing.
Simple but it will work thanks
Ice simple functional set up 👍🎣 also like your Bird Feeder videos 😉❤️
"I didn't wanna put holes in my boat" continues to show a pile of different screws added through the hull 🤦
Dude... those are holes in the boat.
Yeah but he sealed them and made it work ! 😘
Excellent video.
Thanks
@@jacolville5127 thanks for the great ideas
Awesome setup!
I love that set up
Thank you sir!
Well done, sir.
Nice video..👍👍👍
@@SidZork01 tq master🙏
Can you come do mine lol
What type of wire did you use to extend the trolling motor control
Good question that, what I did was look for a heavy-duty extension cord because I needed something that could take the amps. That I cut it up sacrifice to Corydon did the extension
My voice recognition isn't working too well, I said then I cut it and used it
@@SidZork01 awesome my trolling motor has 4 wires not including the ones to go to the battery how would I splice those to a extension cord?
@@SidZork01 is there any way you can show me a step by step on how you put it together
@@johnmcneal2411 use two extension cords
*I bought this model for my 14 ft Jon boat. **enjoyable.fishing** recommend love it!!! It pushes my boat with ease ( 2 men 220 each). I would highly recommend this to anyone.*