ditch witch is a stand alone unit my brotha...this is a skid steer trenching attachment....I guess it's kinda like kleenex right....just commonly known for tissue lol
Josh, before you disconnect the hydraulic hoses from the machine. Turn the engine off. Turn the key back to the on position without starting the engine. Push the button a few times or move the thumb wheel on the joystick back and forth a few times for the attachment function. Make sure the arm bar is down and parking brake is off. Then disconnect the hoses. This will allow any residual hydraulic oil flow back to the tank from the attachment hoses and make it easier to hook them up next time.
morning josh its like everything it gets old been watching your channal for a while and enjoy it i call you the happy famer as u are allways happy you have done a lot of work on your farm and once the trenching is done the cows should be happy be safe untill next time
Josh, if you have trouble with hydraulic quick connects. The solution is to alleviate the pressure in the system. Sometimes this can be done by moving the controls after the machine has been shut off for that particular section of quick connect. In the event that that does not do it. With the machine off use a rubber mallet, Or a non-mooring hammer to gently hit the ball on the mail end of the quick connect. It is best to have a rag over the quick connect because it will spray fluid everywhere. Once the pressure has been released your Connection can be made very easily. Hopefully this helps your situation. Signed the manic mechanic.
my brotha.....I know all this for sure...but sometimes they are still hateful to connect and disconnect lol...sometimes I plan to hook up my implements at the end of the day...let the machine sit overnight before I attempt to hook up..that helps relieve the pressure a bit...sometimes they're just hateful lol
When you started out with this blog I already knew how you broke it. I seen that the chain was too loose to start out with but what can I say not a thing huh?? LoL 😂
Hey Josh thank you for the video and yeah it sure is a lot of work but it's easier now with the machine and things that is not so hot out there now specially with the humidity so it's better that you're getting her done now
You can buy caps for the Zerk fittings that will keep them clean, They do work. And to aid you in filming use a LockNLube Grease Gun Coupler locks onto Zerk fittings and makes lubing a breeze.
SWEET LITTLE GREEN APPLES!!!!!! That is a lot of trenching to be done! As "challenging" as it can be to keep the Trencher operating... it still beats looking at that same job with just a shovel, pick, and crowbar! WOOF! On the other hand, once the job is done, it will be practically maintenance free... due to your forethought and preplanning! Keep plugging away at it Josh... and you will get there!
Like to hear your thoughts and reasoning on the tire waterers versus the frost free watering tanks going forward. Cost of each setup and what troubles you experience with both will a big help to many. Thanks Josh
you will totally get that info in the future as time goes on I'll learn and teach you for sure....I'll tell ya...a huge price difference and labor difference
I use croil or WD 40 to soften the grease in clogged grease certs, (works 4 out of 5 times) When you regrease at the cert the thinner oil sqeezes out first leaving just the grease.
I have the metric and SAE kits from HF so hopefully I always have the right fitting when I need to replace one. Pays off every time I need one. Especially with fuel as high as it is, don't have to run to town for a $5 kit or $2 fitting.
Dude you are such a busy man! Must be good to see the progress you make every day. Thanks for sharing - always appreciate the drone footage - stunning.
Eons ago, when I worked at the motorcycle shop, we often replaced the grease fittings on the rear suspension swing arms with American style zerk fittings. Of course, they’re hollow and shear off easily if you get heavy-handed with the wrench. Fortunately, I came up with a great idea for removing the remnant from the bushing. I took a file and stuck the tang end into the remnant, firmly. The I just twisted the remnant out of the bushing. Proper torque on those fittings I called a thumb and finger oomph.
Josh you've got to get yourself a battery-operated grease gun. I bought a DeWalt one last year and it saves so much time and frustration with all the fittings on my tractor/front loader.
Looking good josh and just think once its done the cows will be so happy. Getting parts for anything anymore is a joke my wife's car has been in the shop for over 5 mo this and all they are waiting for is the gaskets for the transmission to come in. Man I hope evrythingnis going good and I can't wait to see more of the mega shop and the new tractor to.
Hi Josh, Sorry about malfunction junction. Hope that You can get the machine back up and going. You and ALL of the Critters BE SAFE & WELL! Pound that Like BUTTON people!!
Huge project! But you are getting there! Good stuff. Soil looks good...has some good color to it - or at least from what I remember...unless its the camera helping it out.
we are most certainly getting there....but it's gonna take some time. 3 years ago I couldn't press a step in post into the ground because it was so hard...now they slide in with ease! We're making progress!
I don't know if they make them or not, but I think it would be nice to have a trencher where you can drive forward with it so you can tell where your lines are better...
you don't wanna run over your soil so going forward would be much more work...I've said this before...if ya don't like backing up...don't buy a farm lol
lol....I've been to Joel's place several times....he's a friend of mine for sure. Water lines laying on top of the ground all over the place on that farm......this is a little more permanent...and with all the rocks I have here..this is the best and most suitable option for permanent infrastructure ...often times that "easy way" ends up more trouble than just doing it the right way the first time
Uh...lol ...heck yeah...get out your easy chair you'll love this..Joel is a good friend ua-cam.com/video/ta-XnASUopg/v-deo.html&lc=Ugzhu3WRlYLiJeQmXeh4AaABAg
@@StoneyRidgeFarmer 14:39 you state you hit a stone foundation (underground wall) that i assumed you needed the tubing to pass under, around, or through it somehow... you just continued the run after re-attaching the chain with no more mention of this foundation blocking the path of the trench. was just curious how the tube got past the foundation that i assumed blocked the way.
Ram Pump my friend...and that is in no way a sustainable and maintenance free way to keep your livestock watered. Remember your farm can't be a prison....you can't get away for a few days with unreliable systems like that. I had a siphon system for 2 years and it worked...but it wasnt' without it's troubles. This is for trouble free reliable cattle watering year round my friend...so I'm able to travel with the channel and show ya other farms
Josh Good stuff interesting how you tighten the chain reminds me of how one tightens a chain saw blade a bit , so you're tightening it with grease that you've pumped packed into that arm with the roller bearing at the tip, I take it ? Do you have to replace the teeth on the blade too, it would seem to follow. Heavy duty man, with emphasis on the heavy part. Be safe Josh Hydraulic fluid yet another reason for you to wear sunglasses. All the best David. Go ahead have a Cow as matter of fact have a whole bunch more.🐮 Almost missed it @ 22:11 ,"Idont know why I'm burping & I'm tired of farting.? " & " Is there any way that I could please pass again? Taco Bell." if you ever decide to be a comedian I'm just saying we need a Rodney Dangerfield replacement. You so funny make me laugh & smile. Gnarly way to blow your ball cap off while washing your face and deep cleaning the dirt out your nasal passages. Funny stuff brother
Why would it leak? I pressure test everything before I burry it...and all connections are stainless steel so I can find them if with a metal detector if needed
lol...well...to defend my hair....it's been going for quite some time bhahhahahaha....so funny..I saw this clip and had no idea how dang bald I was getting in the back....lol...I now keep it shaved all the time
@@StoneyRidgeFarmer Its happening to all of us. I am 47 and I am literally twice the man I was when I was in the Army. I really need to lose some weight. I was stationed at Ft Bragg, use to go to Asheville and really loved the area. Wife and I are talking about homesteading and we love watching your show. Maybe we will end up in the blue ridge mountains. We love watching your show and have learned a lot. I think the work involved has been an eye opener for her. She is the woman in Tight Fittin Jeans Conway Twitty sang about. I am pretty lucky.
We just call that a ditch witch here.
ditch witch is a stand alone unit my brotha...this is a skid steer trenching attachment....I guess it's kinda like kleenex right....just commonly known for tissue lol
Ditch witch, is a brand name, like Crescent or Channel Lock. Trencher, is the generic term for the tool.
Hi.... Josh nice to see you, thank you for showing your video homestead 👋 bye 👋 bye 👋 bye 👋 🌱🏡🎥👍👍👍
Josh, before you disconnect the hydraulic hoses from the machine. Turn the engine off. Turn the key back to the on position without starting the engine. Push the button a few times or move the thumb wheel on the joystick back and forth a few times for the attachment function. Make sure the arm bar is down and parking brake is off. Then disconnect the hoses. This will allow any residual hydraulic oil flow back to the tank from the attachment hoses and make it easier to hook them up next time.
You can play that water blast every time and I will still belly laugh.
“If you don’t do nothin you don’t break nothin”. True statement. Too many people are afraid to break stuff, trying is learning.
Truth! I am far wide beyond my years because I have really screwed some stuff up. I learned though.
morning josh its like everything it gets old been watching your channal for a while and enjoy it i call you the happy famer as u are allways happy you have done a lot of work on your farm and once the trenching is done the cows should be happy be safe untill next time
Judging by all the feet you have trenched, one fail is not all bad. You sure have got a .lot of work done. You are doing a great job. 👍
Josh, if you have trouble with hydraulic quick connects. The solution is to alleviate the pressure in the system. Sometimes this can be done by moving the controls after the machine has been shut off for that particular section of quick connect. In the event that that does not do it. With the machine off use a rubber mallet, Or a non-mooring hammer to gently hit the ball on the mail end of the quick connect. It is best to have a rag over the quick connect because it will spray fluid everywhere. Once the pressure has been released your Connection can be made very easily.
Hopefully this helps your situation. Signed the manic mechanic.
my brotha.....I know all this for sure...but sometimes they are still hateful to connect and disconnect lol...sometimes I plan to hook up my implements at the end of the day...let the machine sit overnight before I attempt to hook up..that helps relieve the pressure a bit...sometimes they're just hateful lol
When you started out with this blog I already knew how you broke it.
I seen that the chain was too loose to start out with but what can I say not a thing huh?? LoL 😂
Love to see the growth and progress of the farm and channel!
Yep I was thinking that chain way to loose when you first showed hooking it up !!!!
Regular Garage TV!! Well I’ll admit I don’t miss laugh tracks.
Good video
Just be glad you have a trencher 💪, nice work
Hey Josh thank you for the video and yeah it sure is a lot of work but it's easier now with the machine and things that is not so hot out there now specially with the humidity so it's better that you're getting her done now
Such determination 👏
You can buy caps for the Zerk fittings that will keep them clean, They do work. And to aid you in filming use a LockNLube Grease Gun Coupler locks onto Zerk fittings and makes lubing a breeze.
yep....those little caps end up on the ground or lost on the farm my brotha...that's why I don't use them...lock n lube is great for sure
Great video. Putting in water line is hard work. Stay safe. Love your cows and how you do things on your farm.
SWEET LITTLE GREEN APPLES!!!!!! That is a lot of trenching to be done! As "challenging" as it can be to keep the Trencher operating... it still beats looking at that same job with just a shovel, pick, and crowbar! WOOF! On the other hand, once the job is done, it will be practically maintenance free... due to your forethought and preplanning! Keep plugging away at it Josh... and you will get there!
Looks like beautiful soil.
Like to hear your thoughts and reasoning on the tire waterers versus the frost free watering tanks going forward. Cost of each setup and what troubles you experience with both will a big help to many. Thanks Josh
you will totally get that info in the future as time goes on I'll learn and teach you for sure....I'll tell ya...a huge price difference and labor difference
Thanks for sharing your work, and your struggles.
Good video Josh! Woooo!!
As always Josh, great Video...
I use croil or WD 40 to soften the grease in clogged grease certs, (works 4 out of 5 times) When you regrease at the cert the thinner oil sqeezes out first leaving just the grease.
I have the metric and SAE kits from HF so hopefully I always have the right fitting when I need to replace one. Pays off every time I need one. Especially with fuel as high as it is, don't have to run to town for a $5 kit or $2 fitting.
🤣🤣🤣🤣🤣🤣 “She's a maniac, maniac at your love
And she's dancing like she's never danced before…” 🎶
Dude you are such a busy man! Must be good to see the progress you make every day. Thanks for sharing - always appreciate the drone footage - stunning.
Eons ago, when I worked at the motorcycle shop, we often replaced the grease fittings on the rear suspension swing arms with American style zerk fittings. Of course, they’re hollow and shear off easily if you get heavy-handed with the wrench. Fortunately, I came up with a great idea for removing the remnant from the bushing. I took a file and stuck the tang end into the remnant, firmly. The I just twisted the remnant out of the bushing. Proper torque on those fittings I called a thumb and finger oomph.
great idea!
Good advice thanks from saqlain UK 👪 🇬🇧
Nice little project 👌
Well done that's a job and some on a farm and value information thanks
Josh you've got to get yourself a battery-operated grease gun. I bought a DeWalt one last year and it saves so much time and frustration with all the fittings on my tractor/front loader.
Nevermind I saw in the bloopers you have one.
Looking good josh and just think once its done the cows will be so happy. Getting parts for anything anymore is a joke my wife's car has been in the shop for over 5 mo this and all they are waiting for is the gaskets for the transmission to come in. Man I hope evrythingnis going good and I can't wait to see more of the mega shop and the new tractor to.
Hi Josh, Sorry about malfunction junction. Hope that You can get the machine back up and going. You and ALL of the Critters BE SAFE & WELL! Pound that Like BUTTON people!!
Can you tighten up the diging chain? I think that it looks like too much slack, I was a Tank Commander in the Army.
lol...did ya watch the vid? bhahhahaha.....watch to the end buddy
Whooo hooo you got it
Love the videos 💯✌️🌞
Hello from Minnesota. It's like tightening up the chain on the chainsaw. :)
yessir! Glad ya watched all the way through buddy!
The grease fitting is called a zerq fitting
Huge project! But you are getting there! Good stuff. Soil looks good...has some good color to it - or at least from what I remember...unless its the camera helping it out.
dirt is starting to get blacker from the cows looking good.
we are most certainly getting there....but it's gonna take some time. 3 years ago I couldn't press a step in post into the ground because it was so hard...now they slide in with ease! We're making progress!
Laugh every time you show that water explosion. Lol.
Spray your hydraulic fittings with WD-40, that will help with hookup and help keep dirt out of your lines.
How do the cows know to stick their nose where that ball is I’ve never seen that set up before that’s kind of cool
we train them.....video coming this weekend on that very subject and complete install of a Mirafount waterer
Some of those zerk fittings are press/drive in and others are threaded.
Good information 👍
Howdy Josh. Texas
The grease fitting is called a zerk fitting fyi😀
the old one is a press in one
nope it was a threaded fitting just stripped out
Fuel is next !
I don't know if they make them or not, but I think it would be nice to have a trencher where you can drive forward with it so you can tell where your lines are better...
you don't wanna run over your soil so going forward would be much more work...I've said this before...if ya don't like backing up...don't buy a farm lol
Joel Salitin use a homemade spool on a chisel plow to lay water line. Not saying it's the best way but it might be easier than what you're doing.
lol....I've been to Joel's place several times....he's a friend of mine for sure. Water lines laying on top of the ground all over the place on that farm......this is a little more permanent...and with all the rocks I have here..this is the best and most suitable option for permanent infrastructure ...often times that "easy way" ends up more trouble than just doing it the right way the first time
Like a Ditch Witch Hitch
Should be a release valve for hydraulics I would think
Pretty work and lines. Have you ever met Joel Salatin or been to Polyface Farm? Would be some neat content.
Uh...lol ...heck yeah...get out your easy chair you'll love this..Joel is a good friend ua-cam.com/video/ta-XnASUopg/v-deo.html&lc=Ugzhu3WRlYLiJeQmXeh4AaABAg
WoooooooooooHeeeeeeeeHeeeeeeeee!!!!Alright!!!!!🤗
Mate was the rock, deep enough that did not require you to dig it out?
Oh...I had to bring the back hoe over and get the rock out
was hear
woooo
So, how did you get through the stone foundation wall barrier?
please explain? Not sure what you're talking about
@@StoneyRidgeFarmer 14:39 you state you hit a stone foundation (underground wall) that i assumed you needed the tubing to pass under, around, or through it somehow... you just continued the run after re-attaching the chain with no more mention of this foundation blocking the path of the trench. was just curious how the tube got past the foundation that i assumed blocked the way.
Have you seen" Can 1220hp Rip 6ft Deep?" Welker Farms
yep them Welker boys are friends of mine for sure!
What happened to the ramjet water system you put in? We had high hopes of giving it a go here in Oregon.
Ram Pump my friend...and that is in no way a sustainable and maintenance free way to keep your livestock watered. Remember your farm can't be a prison....you can't get away for a few days with unreliable systems like that. I had a siphon system for 2 years and it worked...but it wasnt' without it's troubles. This is for trouble free reliable cattle watering year round my friend...so I'm able to travel with the channel and show ya other farms
Hey Josh, just wondering if you could put the pipe on the hay roller?
I planned to try that this time...but time was a factor...so I just pulled it out by hand
Josh
Good stuff interesting how you tighten the chain reminds me of how one tightens a chain saw blade a bit , so you're tightening it with grease that you've pumped packed into that arm with the roller bearing at the tip, I take it ? Do you have to replace the teeth on the blade too, it would seem to follow. Heavy duty man, with emphasis on the heavy part.
Be safe Josh
Hydraulic fluid yet another reason for you to wear sunglasses.
All the best David.
Go ahead have a Cow as matter of fact have a whole bunch more.🐮
Almost missed it @ 22:11 ,"Idont know why I'm burping & I'm tired of farting.? " & " Is there any way that I could please pass again? Taco Bell." if you ever decide to be a comedian I'm just saying we need a Rodney Dangerfield replacement. You so funny make me laugh & smile. Gnarly way to blow your ball cap off while washing your face and deep cleaning the dirt out your nasal passages. Funny stuff brother
so....video coming soon replacing the entire chain..this thing is very very worn out
You have a wire? Sonar ,to track it if it leaks?
Why would it leak? I pressure test everything before I burry it...and all connections are stainless steel so I can find them if with a metal detector if needed
Hey Josh looks like you need to tighten that chain up buddy looks allful loose to me. That’s why it’s jumping off
Anyone else see that water blow his hat off! Must have had some force behind it. Took half of his hair too!
lol...well...to defend my hair....it's been going for quite some time bhahhahahaha....so funny..I saw this clip and had no idea how dang bald I was getting in the back....lol...I now keep it shaved all the time
@@StoneyRidgeFarmer Its happening to all of us. I am 47 and I am literally twice the man I was when I was in the Army. I really need to lose some weight. I was stationed at Ft Bragg, use to go to Asheville and really loved the area. Wife and I are talking about homesteading and we love watching your show. Maybe we will end up in the blue ridge mountains. We love watching your show and have learned a lot. I think the work involved has been an eye opener for her. She is the woman in Tight Fittin Jeans Conway Twitty sang about. I am pretty lucky.
Oopsie? 😉