Harley Trikes Tri Glide, Freewheeler, RG3 & FLHXXX
Вставка
- Опубліковано 7 вер 2024
- Part 3 - Last Video in Series about Ride Heights, Sag, Low Profile Tires, CVO's.....
Getting the MOST COMFORTABLE RIDE QUALITY Out of Your Harley Trike.
⬇️⬇️⬇️⬇️⬇️ Click Show More Below ⬇️⬇️⬇️⬇️⬇️
Part 3 of a 3 Part Series on Ride Heights, Lift Kits, Comfort Lifts, 14" Comfort Shock Mounts, Regular Profile vs. Low Profile Tires, Air Shocks vs. HD Coil Shocks vs. Quality Shocks. Ideal Tire PSI, All Outlined in this Video Series.
Also, How Rake & Trail are Affected and the Impact it has on Steering.
💥 VIDEO of Part 1 in this Series on Trike Ride Height- • Harley Trikes Changed ...
💥 VIDEO of Part 2 in this Series on Trike Ride Height - • 7 Harley Trikes Measur...
💥 VIDEO on Sag- • FAQ About Sag, and How...
💥 VIDEO on the Proper Rear Tire Pressure- • Why Does Harley Manual...
💥💥 LINK To All NEXGEN™ Shocks- www.dkcustompr...
➡️ LINK To Rear Shock Comparison Report- www.dkcustompr...
💥 LINK to Trike Series Shocks™- www.dkcustompr...
➡️ Understanding Rake & Trail Report- www.dkcustompr...
➡️ Link To Front Suspension Comparison Report- www.dkcustompr...
🏍️ Thank you for tuning in! Be sure to Like / Comment / Subscribe
✅ Get Your DK Custom Products Here
www.dkcustompro...
🛒 Our Gear & Amazon
Check out our new Amazon page for the gear we use!
www.amazon.com...
➡️ SOCIAL MEDIA - CONNECT WITH US
/ dkcustomproducts
/ dkcustom1
/ dkcustom
/ dkcustom
📸 Our Camera Gear: www.amazon.com...
EMAIL: Support@DKCustomProducts.com
The DK Team
I bought your lift kit and put it on yesterday and the trike feels so much different for the better thank you I also put straight through fish tail pipes and today higher handle bars I am loving this trike .
Very nice. Sounds like you are getting your trike set up well for you. 👍
Thank you for your business, we appreciate it, and good to hear it is working well for you. 😀
Wishing you many miles of smiles on your ride! 👍😎👍
I am installing the 13” NexGen shocks with the lift kit on my 2020 TriGlide now. Got the stock shocks removed now I just have to get the new stuff installed. I’m also installing the new rear axle bearing retaining plate while I’m at it. As soon as I can find someone who can press the bearings on/off.
I know you will be well pleased with ride quality of the new NEXGEN™ Shocks and Lift Kit.
I hope you find someone to help press those off. Any tire store or local shop should be able to do it with little to no effort!
Thank you for your business and for commenting! 😎 MB
Awesome video once again, so I’m on fence on buying a 2023 Tri glide coming from a 2020 RGS. Well it’s time knees are what they use to be. Your video explained a lot of good information. Keep up the excellent videos. In the event I go to a RG 3 bike will the concept of your comfort kit work? Tia…
Thanks, glad you are finding the videos interesting/useful. 👍
Going to 3 wheels can be a lot of fun! Not sure if you've seen the video where Dwayne talks about after the first time he rode a Trike...here's a link to it- ua-cam.com/video/QglBaUe7iR0/v-deo.html
Yes, the Convertible Comfort Lift™ works equally well on all Harley Trikes, including the RG3. KP
Always feel free to email or call with any questions:
Support@DKCustomProducts.com
662-252-8828
Good afternoon, I’ve bought upgrades from you before. I have a 2010 ultra classic, I need a longer shifter. I only run the front and a longer brake pedal. I will remove the storage compartments to accommodate the pedals
We do not carry a longer shift arm, but they are readily available from Harley direct or places like J&P Cycles.
The extended brake pedal, for your year & model, that we use can be seen here- www.dkcustomproducts.com/08-13-touring-models-extended-brake-pedal-lever-arm-dk-ex-bk-08tr-c.htm
I enjoyed these 3 videos. I bought your 13" NexGen Shocks for my 2022 CVO Tri Glide since I have HD lifts installed with OEM shocks and the ride is stiff. You stated 14" will not work on Tri Gides with lifts - correct? I am having them installed by HD next week. I tried to install them myself, but the permanent, red Loctite stopped me from loosening the four shock bolts. I measured my trike with the OEM shocks, HD Lift Kit and 26 PSI. They were: Right Fender 12 3/8", Left Fender 12", Bottom of Body at Rear 10 1/2", Center of Hubcap 12 3/4". THE FENDERS ARE 3/8" DIFFERENT. I assume, as you stated, this is due to OEM assembled it wrong, even though it was a CVO and was assembled by one individual. The HD Service Manual states the 4 rear frame screws should be adjusted so the frame side to side is within specifications of 0.125". I noted somne of the trikes you measured were not within the HD 0.125" specifications. Seems HD needs to work on their quality controls. Also, reading the service manual, I learned that there are two bolts that adjust the length of the Rear Body to the frame. You may want to prepare a video explaining these two factors and impact as well as the tire pressure, lifts, and shocks.
Thanks for watching our vids and commenting. Good questions.
The 14" NexGen will work with a Convertible Comfort Mount™, it is not a lift. You can see it at this link- www.dkcustomproducts.com/harley-trikes-convertible-comfort-lifttm-for-14-shocks.htm
HOWEVER, the 13" NexGen's you got work just as well as the 14", and you can install them with or without a Convertible Comfort LIFT, as seen at this link- www.dkcustomproducts.com/tri-glide-rear-shocks-comfort-lift-kit-added-comfort-lift-dk-tri-cmft-lfkt-1551.htm
Yep, it is rare to see a HD Trike where both fenders are exactly the same height off the ground. Fortunately, most of the time it is not very noticeable. I have owned 3 Tri Glides, and none of them were the same...but I never took the time to make any adjustment to them. I DID install R-B-T LED Mud Flaps, and besides being very useful, they also made any difference less noticeable. You can see those at this link- www.dkcustomproducts.com/tri-glide-mud-flaps-w-run-brake-turn-led-lights-built-in-dk-tg-mf-led.htm
We may do a video on adjusting the heights. Thank you.
We do have the other 3 videos you mentioned. They are listed below:
Tire Pressure- ua-cam.com/video/aA5U3-cdm2c/v-deo.html
(and, yes, this applies to the low profile tires on the CVO also.
Lifts- ua-cam.com/video/marLHzA5E0g/v-deo.html
Regarding Lifts being installed by a Dealership- We have dozens of Dealerships that buy these from us and install them regularly.
We have other Dealerships, where the Service Department is not so good at reading or following instructions...those guys sometimes run into problems due to not following the instructions. If would be good to encourage your Dealership to read the instructions and watch the video above, if you have them install a lift.
Shocks...we have many videos on them, but here is one of them- ua-cam.com/video/vbU6fdtxjSI/v-deo.html
Always feel free to email or call us with any questions. We appreciate Your business.
Support@DKCustomProducts.com
662-252-8828
KP
@@DKCustomProducts I had HD install the 13" NexGen to my 2022 CVO Tri Glide today. WOW, you are spot on in terms of giving a better ride over the HD stock shocks!! However, in terms of fender height, HD checked the frame height, and it was to 0.125" speculations, my right fender is still 3/8" higher than the left fender. By process of elimination, the Service manager said it has to be the 4 bolts that attach the fender to the body are 3/8" off. The Service Manager never realized this before and thus measured 3 Tri Glides on the floor - 1 was off 2/8" and the other two were the same. Just cosmetics and does not affect the ride but I expected better from HD, especially CVO cosmetics. So you can add to your videos on fender height can be off due to factory fender attachment being off.
Thank you for the added information! I will share it with Kevin! I am so glad that you are happy with the benefits of having the NEXGEN™ Shocks installed! Thank you for sharing and for commenting! MB
I watched all three videos in this series. Great information as always. I'm going to be adding your suspension setup to my 2023 tri-glide. I do have a question. If the crap shocks are removed and then I add yours, that brings the "sag" back, correct? So, does this mean that the lift portion also needs to be added to the trike? Thanks again.
Yes, with all of our shocks you will have the sag back, which is part of what gives the improved ride. On your '23 if you choose one of the 13" shocks, like at this link- www.dkcustomproducts.com/dk-custom-nexgentm-14-trike-series-shockstm-for-harley-davidson-trikes-2040.htm
You will want to get the Comfort Lift with it to keep the height about the same as where it is with your OEM shocks that have little or no sag.
If you go with the 14" shocks, like at this link- www.dkcustomproducts.com/dk-custom-nexgentm-14-trike-series-shockstm-for-harley-davidson-trikes-2039.htm
You will want to get it with the Comfort Mount, this will also keep your height about at the same as where it is with your OEM shocks.
Either one will give you max ride height, while having proper sag, and a Much Improved Ride Quality.
Thanks for the comment, glad you are liking the videos. Always feel free to email or call with any questions.
Support@DKCustomProducts.com
662-252-8828
Excellent video, keep up the great work...
Thank you, will do. 👍😎👍
How do you guys about the stock front shocks with the battle funding technology compared to aftermarket
Please reword your question...don't understand it.
Can you run a car shock 2016 tri glide
You can run car air shocks, or car shocks with a coil over spring.
That is the first thing we started experimenting with 13 years ago. We played around with it for a couple of years, testing a variety of different shocks...including some from a Corvette. We could not find any that gave a quality ride.
It would have been nice to find some that worked well, would have saved us hundreds of hours of R&D and testing. Also, would have been far more economical.
Here is a link to a Report you may find useful/interesting- www.dkcustomproducts.com/overview-of-performance-rear-shocks-99.htm
KP
So my 2011 TG sits 1/2" lower on the left compared to the right. It scrapes more on the left pipe.
I'm running 26psi. So if I reduce psi to 22, wouldn't it bottom out as scrape even more?
I would need to install a lift kit before dropping psi?
Yes, it would scrape a little easier with the drop in psi. You can add a little air to your shocks, but if they are set where they ride best, then a Convertible Comfort Lift will help you out. See link below-
www.dkcustomproducts.com/tri-glide-rear-shocks-comfort-lift-kit-added-comfort-lift-dk-tri-cmft-lfkt-1539.htm
@@DKCustomProducts can I buy your products in Canada?
@@gregrose6915 We do have a few dealers in Canada. Give us a call 662 252 8828 or email at support@dkcustomproducts.com & we can point you in the right direction.
Does the 2023 tri-glide also have the the coil-over shocks?
Yes.
I ride a 19 tri no issues with me I wear underwear not panties though
We're glad to hear you're enjoying your '19 trike. Ride safe out there! 😎MB
19 TG. My measurements are 3/4 inch higher than yours. I am thinking due to the air in the tires at 26 psi lifting everything up. I am going to do the comfort lift. I am also thinking of going to a slightly taller tire to take care of the lower shift points due to the gearing. What are your thoughts on the tires?
You will like the comfort lift and how the new angle will help your ride quality.
On a taller rear tire, we know some that have done that and liked it. We have not tested it, so can't offer an informed opinion. You might want to check out TrikeTalk.com and ask some of the guys there that have done it.
We do believe that the 2017 and later Trikes could stand to be geared a bit higher.
Most Folks end up with better shocks, and that, combined with taller tires, could cause clearance issues with the fender.
The other option which Kevin is thinking about doing on his 2019 Tri Glide, is to use a different front pulley to get a littler taller gearing.
Might be an idea for a video. Just saying.
@@miamited69 That would be a good video comparison....would be a bit expensive of a test.