Make more videos like this, i loved it! And the detailed video of the rebuild was awsome and helpful! It would be awsome to make some kind of tutorials of your supermoto/dirtbikes services and stuff. Thanks for the videos, the subscribe was totally worth it!
Jetting, reeds or power valve is not right. It isn't building power like it should. I have been riding for a long time and the last year rm's hit extremely hard. Alot of woods riders put a flywheel weight in to slow the crank and calm it down. Love 2 strokes. You guys would love a kx or cr500.
Move your needle clip down one slot, raising the needle. Sounds lean/starved in the mid range. Also no back fires, so you are close. I'd move the clip and do a plug chop there, adjust accordingly. Nice Rm.
Definitely needs tuned. Doesn't sound near as crisp as a 250 should. My 02 cr250 will lift the front effortlessly in 4'th, a slight tug in 5'th and it carries the front without an issue.
It's running too rich on the carburetor needle and pilot jet. Or air screw is way off for the pilot jet, And it's probably too lean on the main jet. Ignition timing might need to be advanced 2-3 degrees too?
Kyl ite ainaki ottasin ton Suzukin mun tehari derbin tilalle! :D Ja ei todellakaan paha oo hinta tosta mitä sanoitte paljon mennyt rahaa. Aivan asia laite karvan verran kahen tonnin pyöräksi! Jopa erittäin!
No it’s not breathing, the guy before probably has re jetted the bike to suit the opened up air box, now that you have closed those holes up, fine tune your jetting to suit that, get some VForce feeds on they’re after that or Boyesen, but sort your jetting out for your airbox mod u did.
Hi, I have a problem. I own a two stroke 50cc Gilera runner 50sp from 2002-2004. It hasn't been started for 10 years, but me and a guy managed to fix it up so it's up and running perfectly. The only problem I have is that every time I start it, it goes up in revs like crazy as if I held full gas, and after maybe 15-20 seconds it goes back to completely normal. This doesn't happen if I start it like 5 min after I have driven it. Can it be something with the temperature and is this normal for a two stroke?
jojjo132_PVP mine did that too. Try to look if all the cables are in place. At mine the oil cable was out and that caused the problem. (Mine is from 1995). Good luck
Stunt Freaks Team Damn you responded fast, I'm just saying you just rebuilt the bike, was the piston even broken in? Did you also let the bike warm up? Since it is basically a brand new watercooled two stroke, they need time to warm up. It looks like in the video you just unloaded the bike, kicked it over and just started ripping it with letting it warm up.
+Bossotronixx look the first episode from this suzuki! There is the reasons why we had to reabuilt the engine.. yeah we know how to use 2 stroke bikes :)
What is the self-adhesive board you use for your decorating kit? I would like to have this product but do not know his name or get it in advance thank you
jacob andres I like them both but mainly 4 strokes. I wouldn't buy a 2 stroke new just used cuz they drop in value fast or can get one needing work cheap and they're easy to fix. 4 strokes have the best reliability
Itel husses (144cc,38mm kaasari,tehari,vforce3 ja vhm kisakansi) ja pakoaukko lukittuna ylös nii vhä samanlaine et ku menee piikille nii repii iha huolel mut alavääntöä vähemmän.
Do video about that streetbike that u have modded as enduro bike. That one that were in biisonimafia's latest video. That thing that juhanavi didnt wanted to drive sober
Tehkää semmonen video missä esittelette kaikki teidän manopelit mitä teillä on! Tykkätkää jos idea on hyvä :+
Make more videos like this, i loved it! And the detailed video of the rebuild was awsome and helpful!
It would be awsome to make some kind of tutorials of your supermoto/dirtbikes services and stuff.
Thanks for the videos, the subscribe was totally worth it!
+hmafionas yeah more projects are coming next week
could be the power valve/ exhaust valve or a jetting issue try lower the needle 1 or 2 clips
+sebastianer1 dropping needle made it good
+Stunt Freaks Team sitte ku tulee noi supercrossiin niin te teette sen semmosen videon Mihin te pistätte niitä Tää ei oo mopoja Moi
Probably jetting but iam sure you will make it work like it should again
nice job guys, fully black seat would just top it off
+Micheal Rex so true!
Te ootte niin parhaita videoissa💪💪 Ja tää on Suomen paras UA-cam ❤💪
Jetting, reeds or power valve is not right. It isn't building power like it should.
I have been riding for a long time and the last year rm's hit extremely hard. Alot of woods riders put a flywheel weight in to slow the crank and calm it down. Love 2 strokes. You guys would love a kx or cr500.
Move your needle clip down one slot, raising the needle. Sounds lean/starved in the mid range. Also no back fires, so you are close. I'd move the clip and do a plug chop there, adjust accordingly. Nice Rm.
Definitely needs tuned. Doesn't sound near as crisp as a 250 should. My 02 cr250 will lift the front effortlessly in 4'th, a slight tug in 5'th and it carries the front without an issue.
New seat cover?
Noita vanne teippejä ois kiva saada eri värisinä jos voisitte niitä hieman kehittää
5:15 - Invisible moto on left side, great camouflage :)
It's running too rich on the carburetor needle and pilot jet. Or air screw is way off for the pilot jet, And it's probably too lean on the main jet. Ignition timing might need to be advanced 2-3 degrees too?
you should try beta rr300 its my favorite bike for enduro and motocross
Did you even break it in
You guys are great, and did a killer job. Thanks.
Kyl ite ainaki ottasin ton Suzukin mun tehari derbin tilalle! :D Ja ei todellakaan paha oo hinta tosta mitä sanoitte paljon mennyt rahaa. Aivan asia laite karvan verran kahen tonnin pyöräksi! Jopa erittäin!
Mitä vuosimallia pyörä muuten on? :)
+Topias 07
What's your power valve setting at? Could be that it's not opening where it needs to.Also how many turns out is your air screw?
I had same problem on suzuki rm125. Check power valv if it's working
I want a dirt bike so bad and y’all just got em every where
Because they work for what they have
The air filter box and the side cover are now one LMFAO
Kenen pyörä toi oli ennen tota projektia?
Millo tulee testividii tost sun unelmä kotkottimesta
+Krees boe pitäs kuvaa mutku joka päivä sataa nii ettei voi kuvaa mitn pihalla 😂
Joo joo tost ruiskukotarista todellaki testipätkää!
Joo totta
She looks f*ckin' awesome! I think in the future you're going to have a lot of fun with it! ;-)
She?
+Stingray5000 haha sure!! 😁👍
When I say "she" I mean the Bike because I think Suzuki is "female" and even if it's not I still call them that way!
+Stingray5000 yeah sure bike's are our bitches 😂👍
I didn't meant it that way but if you say it in this case you would be right.
Bst Carb ever is Lectron for these old 2 strokes ! Had one on my 06 and perfect air/gas ratio ! No more carb tunings !
Niin siis voitteko lähettää mulle uuberia ja teidän tarroja💪❤?
try trial bikes?
Nyt tuli hieno
Thanks for the 7 minute intro.
Tarvikos iskareille tehdä mitään suurempaa?
+Turbojuugend kyä ne huoltaa pitäs mut ei jaksa käyttää rahaa ny enempää tuoho :) pelaa tarpeeks hyvi
etupumput on parhaat sillon kun pitää rykästä ylöspäin että saa fillarin pois dragsteriasennosta
No it’s not breathing, the guy before probably has re jetted the bike to suit the opened up air box, now that you have closed those holes up, fine tune your jetting to suit that, get some VForce feeds on they’re after that or Boyesen, but sort your jetting out for your airbox mod u did.
You were right it says at the end the needle was too high.
Why does it feel like Suzuki is slowly dying in motocross? It's sad.
Dormin Everyone just wants power, I still want a Suzuki though.
I once had a Suzuki rm 80 from 1992. I loved that mini monster.
Piston seal compression test. Carb rubber seal may have little damage affects airflow intake.🤔
Don't waste your time like I did, go directly to 7:00 to see the ride.
Why did you make holes in the wrap for the fuel tank?
+BlauWeißeDT125 gas tank "breaths" thru plastic and greate bubbles
Stunt Freaks Team ah okay👍
"uhkasi heittää opettajan seinään kun äidinkielen tehtävät eivät maistuneet"
Suzuky rm my dream,to expensive to buy, hllo from smal villij in borneo indonesia,hofe someday u not use cant for me 😌
Dedicated bikers love the passion.
where comes the money from to have so much tools and stuff and the production hall?
CanzZz from sponsors
Another great video.
Man i think those spoke skins are so cacky 😂😂
1500?! on a water damaged bike? wtf... that's a rip off. I feel like it's only worth 1500 now
Mistä toi Stunt "Freaks" Team tulee?
noku ne tekee paljo stuntteja
Could be exhaust, in combination with wrong jetting
Hi, I have a problem. I own a two stroke 50cc Gilera runner 50sp from 2002-2004. It hasn't been started for 10 years, but me and a guy managed to fix it up so it's up and running perfectly. The only problem I have is that every time I start it, it goes up in revs like crazy as if I held full gas, and after maybe 15-20 seconds it goes back to completely normal. This doesn't happen if I start it like 5 min after I have driven it. Can it be something with the temperature and is this normal for a two stroke?
It has high idle thing to warm up the engine quick. It really should be that high, but its a feature. Just dont mind it and keep riding!
yeah if it goes normal on its own and works, don't mind it just ride it :D
jojjo132_PVP mine did that too. Try to look if all the cables are in place. At mine the oil cable was out and that caused the problem. (Mine is from 1995). Good luck
Thats the choke
Thanks for the answer!
Soon I rode hear 2 stroke an rode it I was hook on it loved it
did you break it in or let it warm up.
+Bossotronixx what you mean? The needle was set to high..
Stunt Freaks Team Damn you responded fast, I'm just saying you just rebuilt the bike, was the piston even broken in? Did you also let the bike warm up? Since it is basically a brand new watercooled two stroke, they need time to warm up. It looks like in the video you just unloaded the bike, kicked it over and just started ripping it with letting it warm up.
+Bossotronixx look the first episode from this suzuki! There is the reasons why we had to reabuilt the engine.. yeah we know how to use 2 stroke bikes :)
Stunt Freaks Team se sano että sisäänajoottako mäntää vaikka myöhäs oonki
hiii i from indonesia, n i hear you sai indonesia, im so proud...
O k
Hey What did you guys put down The grips (they goed So esyli
What brand scoop tire you have on the back
I think michelin or pirelli, I am not sure.
Do 1 more video on the rm 125
Very nice bike, I sure do miss my RM 250
@@leonvisic How could you miss an RM? you must be joking right ?
@@TerminatorT--jc2hf you must be joking!
@@sagaubbx rm weak pistons
@@TerminatorT--jc2hf Leo weak grammar
@@sagaubbx I give you weak grammar. right in the side of the ear hole son.
2strokes are always tired in the low revs but then they scream at u as hell
wow you musta done your research
2 stroke not a 4 stroke mate
We no
@@mrhappybastard2632 2 stroke is the best!
videoo tosta kooteeäm kolomesatasesta?
did you guys put the exhaust valve in correct, same problem with my 125sx had no power in the mid or low and at the top it shot out
Pilleilä tuunasitte nuo vanteet? 🤔
Motonetis myydään pinna pille
might be running too rich since you restricted the air intake.
What is the self-adhesive board you use for your decorating kit? I would like to have this product but do not know his name or get it in advance thank you
Here come the 2 stroke vs 4 stroke arguments
jacob andres I like them both but mainly 4 strokes. I wouldn't buy a 2 stroke new just used cuz they drop in value fast or can get one needing work cheap and they're easy to fix. 4 strokes have the best reliability
New seat cover???
Tehkää video jossa esittelette teijän ihan kaikki ajoneuvot
music in the intro?
Pakoaukonsäädin lukittuna ylös?
Itel husses (144cc,38mm kaasari,tehari,vforce3 ja vhm kisakansi) ja pakoaukko lukittuna ylös nii vhä samanlaine et ku menee piikille nii repii iha huolel mut alavääntöä vähemmän.
I like the graphics
Some RM250s have an adjustable powervalve, giving more low mid or top end power if u adjust it might be that
Do you have the Mikuni TMX 38 carb on that bike?
Do video about that streetbike that u have modded as enduro bike. That one that were in biisonimafia's latest video. That thing that juhanavi didnt wanted to drive sober
Näyttäkää jossain videossa teidän kaikki pyörät
Käytitte mun iskällä koneen huollossa
+Tomi Silvan joo tai kiertokangen 👍
+Tomi Silvan joo tai kiertokangen 👍
Stunt Freaks Team jipii
Hyvä lopputulos!
Meinaakko laittaa smotot toho kotarii
Onko mitää mini crossei voitte myyä
Can you change VR 200 (hardford)into this model
You mean the injection needle was too wide ?
Daëmon carb needle
Eiks tosa antin kolmesatkus oo rev limitteri? Meinaa ku nelareis
ayyayy mitäs sä nyt selität
BlackKiwi 420 nii että näis tpi malleis on koska fuel injection mahdollistaa🤔
Which size of Uber tape Is required for RM?
oisko pa säädin?
It needs to be jetted correctly
needle was to high
if you want to clean the plastics, spray with window washer then wipe with a towel you would use to wax a vehicle
Raottaako läpät
kaasarin neula oli liian ylhäällä, kuten lopussa lukee :D
Kurbelwellen Sommeringe oder die auslassteuerung
Hä was meinst du?
milloo pv video
Stickers add power
Power valve isn’t working properly
What year????
Where i can get those stickerbomps
+Jokke check the description box
Where do I get the graphics kits?
What kind of back tire
Bike ka price kya hai
Saan viikonloppuna Suzuki RM85. Ostaisin uberia jos jää rahaa kun ei jää
*New stickies B)* fuck cutting them out by hand tho, I'd fuck that shit up !!
The best!
Ette arvaa kuinka paljon oon odottanut tätä kun KTM ja susuki rm 250 on mun lempi mopoja.
Ne ei satu olemaan mopoja.,,,.
+Thuned meille kaikki kakspyöräset mis o moottori on mopoi 😂👌
SLIM DANK tyhäm
Is this bike any good for light enduro and trail riding?
Negative, not enough low end. You are better off with 4-stroke 300cc and up.
Fred Pinczuk i trail ride my rm250, it does fine if you know how to ride it lol
was it the reeds?
Olen miettinyt että alottaisin motocrossin niin kumpi ois parempi alottelialle 4tahti vai 2tahti
kone 4 tahti. Itekki alotin 4 vuotiaana Honda CRF50F mut nykyää mul on Yamaha YZ85
NixuFin okei kiitti tiedosta
Saanko tehä teille intron sft
LL-89 tirronen ei nää mitään vitun 3d intro jumputesta käytä :D
Oon oottanu niin kauan tätä koeajo videoo
A 250 what is a 2 stroke??
Yeah, u can find 450cc 2-stroke hondas but they are extremely rare.
they're more like 500 cc
Infinity or just buy 700cc 2stroke maico