You can actually watch the sandblasting material coming out of the frame as they are kicking the bike over. (10:10). No one bothered to blast it out before painting it. LMAO!
I was totally wondering what that was! The whole time he was kicking it over, I was watching it fall out little by little out. It looked like smoke. Then I was like uhhhh.... crankcase sand.... Like, does he know he’s Fuckin that bike up? Then I searched the comments saw yours. And immediately knew that i was an idiot for second. Haha. Hey! Good eye man. I didn’t even think bout that. It looked like fluid.
I very well thought the same thing. I thought that they fucked up putting the bike back together and the engine was blowing out shit from the bottom. I realized that that frame was painted and didnt really think about the sandblast dust. Wow. Lmao.
Tip: wire the gears and shafts together before removing or better yet just leave them in the clutch side crankcase, freeze bearings in freezer for same results, Ive done a million of these
A tip for everyone: If you want a stuck bearing out, first remove the inner part and then weld across the bearing, the welding pulls together and the bearing just falls out. I was sceptical about this method at first but then I tried it.
you probably dont care but does anybody know a tool to log back into an instagram account..? I was stupid lost the login password. I appreciate any help you can give me
@Alec Anson I really appreciate your reply. I got to the site thru google and I'm waiting for the hacking stuff atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
Hay how do you tell what size rode you need I have a rm 125 and it blue it's crank bearing and I want to just replace the rode pin and bearing so what size rode do I need.
Left vinyls on left side, and right vinyls - on right side. Because they all awesome! %) Help me with LC4 engine rebuild. Tthermal gap for stoke piston and cast iron cylinder - 0,03 or 0,04 mm?
по коленвалу так бить нельзя. при необходимости вместо этого надо бить по картеру через текстолитовый брусок,например: коленвал много тяжелее,поэтому инерцией его загонит в картер. а резонатор чётко выправили,респектище! )))
По колену вообще бить нельзя, по-хорошему если. Я прибдлуду из съемника сделал, она мягко на корпус опирается с внешней стороны,, цепляет колено за гайку и втягивает в внутреннюю обойму подшипника. А для легкой постановки подшипников морозилку из двух пельтье по 50 вт сообразил, они до -10 морозят хорошо и быстро
сделали по факту 0,035 мм, но диаметр на юбке больше диаметра жарового пояса где-то полмиллиметра. Я же склонялся к 0,04 мм как минимум. Посмотрим по эксплуатации. С никасилом были прихваты из-за недостаточного охлаждения (и масла, и включение вентилятора радиатора ОЖ позднее).
Ei kannattais käyttää normi paineilmaa tos pakoputken oikasus, aikamoine pommi jos repee jostai kohasta :D paineilmapesuril kaikista turvallisinta ja toimii kans paremmi.
My 1986 250RM 2 stroke Suzuki clutch went out on me when I was trying to pull start it and now all it does when I try to crank it is just crank over don't even try to sound like it even trays to start can anyone out there help me with this problem I will pay to get it started agin I just got the bike and it's been a blast I don't want to junk it I freaking love hollering for help
Is there pressure in the piston when you move the kickstarter? If so the most likely reason is the carburator and in a 80's bike the intake manifold might have became brittle
Itellä on derbi vuodelta 2000 se toimi viel noin 4 vuotta sitten mutta päätin korjata sen. vaihdoin staattorin ja cdi boksin kyllä lähti käyntiin mutta kytkimessä on vielä jotain häikkkää!
motohunter You have to find it out somehow do the engine work and does it keep running or does it shut down. Also, with my moped you have to rev it when you start it so it keeps running. It is a 2 stroke also. Anything havent blown up yet and probably would not before I get a car.
+F3D0M1L real 2 stroke dirt bikes can handle little cold reving.. and the motor was super rich because all the oil what was on the piston and the main bearings so it never goes clean if you dont rev it
Mukava kattoo näitä ku haen huomenna tai ylihuomenna rm250 joka on leikannu ja laakerit pilalla ku se on noin 30 vuotta vanha. Ja moottori ollu viimeks auki tehtaalla :/
You guys deserve millions of subscribers!! Really love your videos
+enduro.carinthia thanks man👍😇
You can actually watch the sandblasting material coming out of the frame as they are kicking the bike over. (10:10). No one bothered to blast it out before painting it. LMAO!
I was totally wondering what that was! The whole time he was kicking it over, I was watching it fall out little by little out.
It looked like smoke. Then I was like uhhhh.... crankcase sand.... Like, does he know he’s Fuckin that bike up?
Then I searched the comments saw yours. And immediately knew that i was an idiot for second. Haha.
Hey! Good eye man. I didn’t even think bout that.
It looked like fluid.
I very well thought the same thing. I thought that they fucked up putting the bike back together and the engine was blowing out shit from the bottom. I realized that that frame was painted and didnt really think about the sandblast dust. Wow. Lmao.
Fred Pinczuk well spotted
Hell yeah I see something dripping like sand
that freezespray method was really smart!
Tip: wire the gears and shafts together before removing or better yet just leave them in the clutch side crankcase, freeze bearings in freezer for same results, Ive done a million of these
That exhaust dent fix is amazing. How did you plug the other end? And how much psi?
i would love to spend a week with you guys, these videos are so fun!
right looks good AF
love ur content guys
Lisää tän tyylisiä videoita ehdottomasti! Ja oikeenpuolimmainen tarrasarja!
10:06 what is spewing out of the bottom of the bike ?
Raptor Vlogz i think it's sand
Sandblasting media.
Right side for sure but why did it take so long to start? I don’t know if you said it in the video
Ku Leppänen puhuu englantia, se kuulostaa iha Italialaiselta.
Koska se etuveto crossi?
Komee video. 😊 pitäs kans tehdä kuvina ja videona parin RM suzuki 125cc koneen rakentelu ja viritys lisäks testiajoon asti.. omilla kanavillani. 😁
Tuutteko 2017 vuonna supercrosseille?
Use a socket and heat it and drop it in your bearings lol a lot easier.
On kyllä teidän videoiden parhaimmistoa!
Lisää tämmösii videoita👍 ja sanon oikee
Sattupa sopivasti. Just tässä aamulla Vetteli keskeytti tulppavian takia. Että se siitä laatutulpasta :D
A tip for everyone: If you want a stuck bearing out, first remove the inner part and then weld across the bearing, the welding pulls together and the bearing just falls out. I was sceptical about this method at first but then I tried it.
These guys are so funny to watch!
Kuinka monta kilsaa tommosia kakspuokkeja pittää sisäänajaa?
kolme
ei näitä vehkeitä sisäänajeta vitun päsilö. Kovaa ajoa vaan
Riittääkö lohkon lämmitykseen kuumailmapuhallin ja kylmä spray että saa laakerit paikoilleen
Funker Tactical no ekkö sää nähny tos
Heleposti
Right, and awesome video!👌
Miksette ite vaihtanu kiertokankea? Mietin kun en oo sitä joutunu ikinä vaihtamaan.
+Turbojuugend se o vähä vaikeempi homma tarvii sorvia yms
What did you gap your piston rings to got a rm 250 01 standard bore size 66.40 wossner piston 66.34 tia
is that bike a lese?
Mesh yellow eli right!
Use the uber tape on the antti's right.
Puhdistakaa ja vahatkaa katteet ja jos on pakko laittaa Uber teippiä nii laittakaa oikeen puolimmaista ni on enemmän keltasta
Amazing Video, greetigns from Germany!
Tape it like anttis bike other side is that yellow mesh and other is that pink
THE_0sku you sir, need to be higher! Why choose when you can have both!
Did you forget the gasket??
Worn out clutch basket :P. But nice build thought
Vauhtipyörä on jumissa mitä teen?
Why was there sand dropping from the bike when he was trying to start it?
+Vq37 VHR frame was on sand blast
I love his accent
you probably dont care but does anybody know a tool to log back into an instagram account..?
I was stupid lost the login password. I appreciate any help you can give me
@Jaxxon Ashton Instablaster ;)
@Alec Anson I really appreciate your reply. I got to the site thru google and I'm waiting for the hacking stuff atm.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Alec Anson It worked and I actually got access to my account again. Im so happy:D
Thanks so much, you saved my account :D
@Jaxxon Ashton glad I could help =)
Yo, Holmes! I saw a leftover washer on the floor no 4th gear for you! Hee hee
Hay how do you tell what size rode you need I have a rm 125 and it blue it's crank bearing and I want to just replace the rode pin and bearing so what size rode do I need.
Left vinyls on left side, and right vinyls - on right side. Because they all awesome! %)
Help me with LC4 engine rebuild. Tthermal gap for stoke piston and cast iron cylinder - 0,03 or 0,04 mm?
Mikä tausta musa tosta 10:20 alkaen?
Left because right its too much mainstream :D
Ainaki nyt tiedän miksi mun moottorista olis kadonnut yksi osa, jos sattusin viemää tonne.
+F3D0M1L hyvästä remontista jää aina ylimääräsiä osia 😍👌
Stunt Freaks Team Se on kyllä totta :D jos koneremontista ei jää ylimääräsiä osia se on kasattu päin vittua :D
Moro voitteko auttaa kun toi mun bse 125 kone on jumissa että mitä vois tehdä tarviin apua?
Thuned mitä teen kun vauhtipyörä on jumissa
leiponu
Dont need change bearing in gearbox ?
+kustosz89o water didnt go there so it was fine
It works :D
I say the one on the right ;)
3 ktm bikers disliked the video
Minulla on sellanen ongelma kun minulla on bse 125 ja tarvitsisin tiivisteet siihen mutta mistä toivottavasti vastaisitte @stunt freaks team
+Veku veturi kuka myy bse suomes googlaa:)
Kiitos
по коленвалу так бить нельзя. при необходимости вместо этого надо бить по картеру через текстолитовый брусок,например: коленвал много тяжелее,поэтому инерцией его загонит в картер. а резонатор чётко выправили,респектище! )))
По колену вообще бить нельзя, по-хорошему если. Я прибдлуду из съемника сделал, она мягко на корпус опирается с внешней стороны,, цепляет колено за гайку и втягивает в внутреннюю обойму подшипника. А для легкой постановки подшипников морозилку из двух пельтье по 50 вт сообразил, они до -10 морозят хорошо и быстро
и я о том же. коленвал слишком нежен для этого.
вопрос на засыпку: одностволка, водянка, штатный поршень алюминиевого сплава, горшок 102 мм гильзованный, гильза чугун 3 мм. Какой тепловой зазор?
45-70 мкр.
сделали по факту 0,035 мм, но диаметр на юбке больше диаметра жарового пояса где-то полмиллиметра. Я же склонялся к 0,04 мм как минимум. Посмотрим по эксплуатации. С никасилом были прихваты из-за недостаточного охлаждения (и масла, и включение вентилятора радиатора ОЖ позднее).
i love this shit when you build old stuff in to new stuff
5:42 mukavat portaat kruunussa:D
Eipä tollane oo vielä edes paha j
Selailin teijän nettisivuja ja katoin, että teiltä on tullu uus video :D
More minicross videos!
Ei kannattais käyttää normi paineilmaa tos pakoputken oikasus, aikamoine pommi jos repee jostai kohasta :D paineilmapesuril kaikista turvallisinta ja toimii kans paremmi.
mite kannattaa tehä painepesuril?
Kari Taalasmaa samalla tavalla ku paineilmallaki
+Samuel Sippola voiko siinä ny mitää kummempaa tapahtua jos putkes on 2bar painetta
Hay alguna página en español del manual de reparación y mantenimiento del rm 250
PLEASE do a SUZUKI DR650 engine rebuild !
Onko lämmittimes vetoja
My 1986 250RM 2 stroke Suzuki clutch went out on me when I was trying to pull start it and now all it does when I try to crank it is just crank over don't even try to sound like it even trays to start can anyone out there help me with this problem I will pay to get it started agin I just got the bike and it's been a blast I don't want to junk it I freaking love hollering for help
John Figueroa carb check
Is there pressure in the piston when you move the kickstarter? If so the most likely reason is the carburator and in a 80's bike the intake manifold might have became brittle
tehkää lisää minicross enduro videoita
Hillarous, nice work
Right
🏍💨
Yellow and black 🤤
Alexander Pettersson blacking yellow :D
Itellä on derbi vuodelta 2000 se toimi viel noin 4 vuotta sitten mutta päätin korjata sen. vaihdoin staattorin ja cdi boksin kyllä lähti käyntiin mutta kytkimessä on vielä jotain häikkkää!
right cause its yellow like the bike so you wont ruin it :)
Hi Guys! AwSome WorK! Could you share the manual pdf file ? Thanks ! :)
missö toi ¨garage¨ on?
I hope you torqued the cylinder foot nuts to 38nm, and the head nuts to 25 ;)
laittakaa iso Rizk tarra kekselle tankkii ja katetta ja joku tumma ja hassu ubertape alle
The left tape pls
Wanna fix another RM 250 I have an 2001
choose the RIGHT one!
After a fresh rebuild on a 2stroke pop start them the first time and after that it will kick just fine
Very interesting. Do you know why?
That's terrible advice 😂
Eiku oikee👌🤘
Right absolutly
Right on oikee
Right
miks ei uusia katteita
+power2619 ei viittiny käyttää rahaa enempää
will probably do something like this me to :) im sick of cars
You revved a cold engine and its a fresh rebuit engine aswell how stupid on a 2stroke do you wanna blow it up
motohunter You have to find it out somehow do the engine work and does it keep running or does it shut down. Also, with my moped you have to rev it when you start it so it keeps running. It is a 2 stroke also. Anything havent blown up yet and probably would not before I get a car.
+F3D0M1L real 2 stroke dirt bikes can handle little cold reving.. and the motor was super rich because all the oil what was on the piston and the main bearings so it never goes clean if you dont rev it
right
Millon tulee test ride
+Niilo Marttila tänää kuvattii katotaa jos sunnuntaina kerkeis leikata videon ja julkasta
Right (the yellow one)
Mukava kattoo näitä ku haen huomenna tai ylihuomenna rm250 joka on leikannu ja laakerit pilalla ku se on noin 30 vuotta vanha. Ja moottori ollu viimeks auki tehtaalla :/
Made it look easy with the bearings ...I just press them in..
Oikee kelta-valko-musta
Oikeen puolinen uuberi sopii suzukiin paremmin koska keltane
Hello, I do not speak english, what is spark plug the best for RM 125 model 1980.
Thank you
I dont speak chinese so i cant help you with your problem
@@karu3707 cuál es la bujia ideal para esa motocicletas ?
@@karu3707 what plug RM 125/ 1980 - 2 stroke
@@karu3707 ok
@@LuisRodriguez-ec8gv BR9EIX
Saattaa olla ku toi vauhtipyörä ei liiku yhtään nii mitä voin tehdä
Right !
Kaua meni? Right
+SähköVika pari päivää me sitä värkättii. Osien tilailuun meni melki viikko
Stunt Freaks Team Okeii
Vasen koska siitä tulis tylsä jos ois pelkkää keltasta ja mustaa
Awesome !
Half left & half right
I think another One is better
Right! Sorry, Juha ;)
Nostakaa iskarinpituutta tai laittakaa koropala näyttäs paremmalt
Right one
tuliks tuolt rungo sisältä soodapuhallus soodaa ku poljitte käyntii:D
11:18 onks kaikki hyvin xD
right !
Oh, i see. SFT goes politics. Pink left is not an option.