4Runner Non-Drilling Prinsu Roof Rack - DETAILED INSTALL! 5th gen 4Runner!
Вставка
- Опубліковано 27 сер 2019
- Prinsu Full Length Non-Drilling Prinsu Rack:
www.runnin4tacos.com/collecti...
In this video, we go over how to install the Prinsu roof rack on a 2016 Toyota 4Runner. This will apply for all 5th gen 4Runner from 2010 to 2020.
We go into detail how to lay ou the roof rack and how to assemble it piece by piece on the floor. Then we carry it to the 4Runner and demonstrate how to mount it to the existing holes on the 4Runner.
#toyota4runner #4runnermods #4runnerroofrack
Great video. My buddy and I watched it and proceeded to the garage. Without having the roof wrapped, I installed a six inch wide strip of 3M clear paint protector where the wind noise deflector hits the roof. Everything else went as you described. Excellent job Taco Twonz!
2015 Inferno TRD Pro.
Thanks man! Best prinsu install video on UA-cam for sure, helped alot !
Thank you so much for this video. Just finished installed my roof rack with the help of this video!
Really great video guys, it helped me perform an issue-free install today. Thanks for taking the time to share!
Great tutorial! I installed mine today and I really like it. Thanks dudes!
The wrap on the top is such a great idea! But most importantly, it looks very cool - especially with super white. Practical and stylish! 👍
S1CNARF thanks! Appreciate it!
Great video guys. Thanks it helped a ton with my install !!!
Such a great video! Clear and precise!
Great vid, easy to follow walkthrough. Dig the rack.
Great video! Installed today and this video was helpful!
Great job on this video. Very helpful.
4Runner looks so good in white. Looking forward to the lift install. Those gold baller scissors though 😁 Thanks for sharing guys🤙
Ray_ 23TRD 🤘🏼
Made my install easy, thank you very much!
Great video, very informative. Nice job!
Nice info! I’ve been looking for a no drill rack. New sub.
Thank you guys that was awesome 👌
This video got my rack on my car. Thanks
Cant wait for you guys to start building out the runner. BTW... another reason why you go with Prinsu is so you can remove the crossbars to clean the roof. Instead of removing entire rack (Gobi). :)
Mark Mollat thanks! The Prinsu is definitely my favorite rack so far
Nice video. Thanks 🇺🇸👊
So helpful!
@Taco Twonz- great how-to video -- thanks for posting! Question: you said this replaced a FrontRunner rack -- after you removed the OEM/stock rack and before initially putting on the FrontRunner rack, did you see a need to clean the rooftop bolt holes to clear out any leftover loctite from the factory?
That garage floor is amazing. No joke. Thanks for the install guide too lol.
Good install vid! Would be nice to wrap up the vid with updates about wind noise and open moon roof clearance with bars 2 & 3 in place
Hey guys! Love the video.. question on the silicone sealant if you have a second. Do you put it inside the bracket holder and screw hole or seal it on the outside? I noticed you guys have a ton of silicone on the outside of yours..
Sweetest rack on the market IMO, compliments the lines of the 4Runner. Great job on the install. You did a vinyl wrap on the roof? Makes total sense and looks great.
Awesome video, guys! 👍🏻
FWIW silicone didn't do the trick for me (still got a damp seat belt on the drivers side). I recommend using a butyl rubber sealant (I used Red Devil 06970I RD that I bought off Amazon)
Are those 2inch or 3 inch nerf bars? Thanks in advance man....keep up the good work 👍
I like them rims.... looks like mines. Looks like your running 17r. Mines 16x8
Nice looking T4R! What are the details on your tire/rim setup?
On this prinsu racks can you put a thule cargo box on top?
Hey guys, just mounted this roof rack with the assist of a friend and this video... what back ladder do you have mounted to the 5th gen and will it mount to this rack??
So the front supports are just taped and there is no longer weather stripping on top of that area?
Update: they no longer use the locking washers, they send a thread lock. I almost panicked when I couldn't find them. Called and they confirmed this for me.
Thanks for the update! We might have to do an updated video
Are you able to attach a Thule cargo box on the cross bars?
what did you guys use to cover the roof of the 4Runner?
Did you guys use threadlocker on the bolts?
Great install video! What is the height of the rack (at the highest point) above the T4R roof? There's no info on Prinsu's site. Thanks for the vinyl wrap tip too, I'll def be doing that too!
Plus 1.75 inch to the total height of your 4Runner
They should have made the front bracket just be a press fit on top of the weather stripping. Aka install the front bracket before TQing down the main middle and back brack ets.
Hey Guys I followed your directions exactly to install the prinsu rack on my 4 runner and it worked out perfectly. Thank you so much. Do you have any recommendations for a cargo box that fits the prinsu rack? I tried using the Yakima and cargo box and it did not work. I would appreciate any recommendations. Thank you.
Humm just had a thought. Perforated aluminum sheet on top so one could sit up there or in my case use it as a prone shooting platform at the range :)
Thanks for this video. Considering this rack or the 7/8. 2 questions. 1) why do they ship that one front crossbar that is not powder coated black? 2) Can you not notch the weatherstrip for the L bracket instead of jutting it completely. So it just lays over it? Seems thin though that it may work,. Just curious. Thanks again.
Looks thin and cheap compared to the OEM rack
@@CP-kb1du It's aircraft grade aluminum. It's not cheap.
Does the silicon in the hole not cause a problem when taking it off and on?
Any bad vibrations?... during reverse and idle?...
Do you really have to cut the black seal? For the L bracket?
Great video - thanks! Does anyone know if the Prinsu rack interfers with the Gobi ladder in the rear when opening the hatch door all the way?
It doesn't
Can you still use the sunroof?
Does the rack clear the top of the fin?
Great video. Can you tell about those wheels and tires. What brand are they
I forget what they are. Some American Racing wheels on Amazon, super cheap
Is there a specific type of wrap you guys used? Thinking of doing the same to my Runner.
Avery is good, 3M is ok, there's a few other brands
Great video, I did not get the sound strips though. When I ordered it said it was only for the 4th gen. We shall see if it’s loud
I had the same issue. I'm working on my install right now; we'll both see how it is in the next few days!
Party Goose So you will need the strip regardless because of how close the front of the rack sits to your paint. So go to autozone or auto store and get some door trim. It works very well
How has that strip of the weather guard you cut out been doing, no leaking into the doors or anything?
My weather strip flew away on highway. Cannot tell if anything leaked into my roof. I am not sure what the best way to tell that is.
Rack giveaway ? I’m down !! Lol
Machiavelli_ G lol I wish I could
@@Runnin4Tacos same here buddy!
Installed mine with the help of your video! Thanks. Im missing the screws/lock nut that goes on front with the non drill. Still waiting on prinsu to send them.:(
it seems to be common issue with prinsu missing hardware, i went to install yesterday and was missing all 38 lock washers needed for each roof bar...
@@1CommonView the give you lock tite now it’s part of their instructions now
@@clayboy_20 They give you locktite yes, however instructions still said to use the missing 38 lock-washers.
@@1CommonView the new instructions on their website say that they did away with the lock washers and replaced it with the lock tite. I just finished installing one about 30 seconds ago only reason I knew that they changed it 😅
Do you still have the frontrunner rack?
I feel like cutting the weather strip wasn’t necessary considering you could just notch it?
What tent are you running as well is this roof rack strong enough to run larger tents?
Skycamp and yes it is
Min 1:53 it shows a different lateral rack support which attach to the roof basically in the center, which normally is one in the middle and the other one at the back end. - Did you get the wrong rack by chance? just wondering because I freaked out a little bit when I saw it..... I ran to check my roof ! LOL
Did you guys do the wrap on the roof yourselves? Or at a shop? Thanks
A shop did
Loc-tite on all those little bolts?
Any discount promo code for Prinsu?
What about the big open space in the rubber to the left of the L bracket? Seems like that would open it up to water damage.
All holes leading inside are filled with silicone
What kind of sealant do you recommend for installing a roof rack?
I used construction silicone from Home Depot.
Any reason why you wouldn’t just attach the 3m directly to the weather strip instead of cutting it like you did?
I agree Dylan. One would need to modify the bolt holes on the front bracket to account for the difference in height ( aka the weather stripping still being in place). Only function I see for the front brackets to to support the front end if one was to load the front of the rack with a heavy load...however if one was never panning on adding a heavy load up front they may not even be necessary. It is possible that the front bracket are still a good idea to keep the rack from "ringing"/vibrating as air flow flows around the structure.
I'd see if I could just lay the weather strip over the L-bracket. *shrug*
@@ChemAndAdrenaline Agreed. I think I saw a video where they tucked it under the weather strip and seemed to work fine.
What wheels are you running
Double sided tape seems like wouldn't hold. Great video.
What wheels are those?
Would RTV silicone work just as good as that clear silicone you used?
butyl tape from home depot, use it two inches before and after oem mount holes
poke a small hole where bolts go and then bolt up
Hey, is it possible for you guys to measure the height of the rack from the roof of the truck? I'd appreciate it. I have a low ceiling parking garage I have to deal with. Great video BTW and that Taco looks awesome!
We don't have it anymore unfortunately
@@Runnin4Tacos what happened to it?
@@chewminem2044 ?
Is it heavy, any MPG loss
Is there any interference when using the moon-roof?
Matthew Bruns there isn’t any interference as it’s modular. Even with the cross bars over the sunroof you can open and tilt. Prinsu has a video explaining this.
sweet rack, like better then frontrunner?
NoPro Dad definitely
Question you botl it out when the silicon is soft or let the silicon dry
Soft do it gets in between the cracks
Taco Twonz ok what about that metal before the spacers(not the round spacers but flat square ones on the bottom of it) does it come with item or its seperate?
So by no drill, does this just mean that the hole pattern fits the holes from the factory rails that are installed ?
Both the drill and non drill use the factory rack holes. The front is where you can either tape the mounts or drill holes and hard mount them. You can switch to a hard mount later if you feel like it’s necessary.
What kind of silicone should I use?
That silicone fix is a little sketchy, Prinsu should have come up with something better to seal that mount from the elements.
How is it that some adhesive can hold a roof rack down?
It's just a little extra support for the front
Do you happen to know what the fully assembled dimensions are?
No sir but Prinsu may have it on their website
Yoooo is that rack compatible with a side awning?!
yes. Prinsu makes an awning mount. prinsudesignstudio.com/product/prinsu-awning-mounting-brackets/
Do you think the rack could of been installed while it is on the roof? I am just thinking if I am by myself how I could move the entire rack to the top. Would you see an issue with installing the sides first and then the cross beams one at a time while on a ladder?
After watching this video and assembling mine on the floor of my garage....this thought hit me as well. I can't imagine doing the sides first then the crossbars would be an issue.
Has anyone had a problem with wind noise? And, if that is the case. What steps are needed to correct the noise? Thank you.
No wind noise, there's a noise trim reducer also
Could you have just put the 3M bracket on top of the weather strip?
Right that’s what I was wondering
Apparently you can tuck it underneath. Going to try soon.
Bro how to remove old silicone? My roof rack leaked so need to reinstall!
Plastic pry tools will do it
What silicone would you suggest to use?
What tires do you have on there?
Those are wrangler duratracs
Which ladder is that on the 4runner
I was wondering what ladder you guys went with as well?
Is it possible to install solo?
Install side bars first then add crossbars after , do the 3m tape feet last
What is the reason for the 1" spacers?
Cristian the weather strip channel creates a gap when the bolts go into the factory holes so the 1” spaces are used to fill the gap so the rack sits properly. A good piece of advice when using the spacers is to make sure you apply silicone around the base of the spacer and the top so it forms a weather seal.
@@crazygooseventures Thank you for the response. Makes sense , when we get our rack we will keep the silcone trick in mind. Any specific silicone? Or do i just go to my parts store and say give me the best silcone you have?
Use automotive or marine grade silicone sealant. In my case living in Canada where I get long winters, I used automotive grade silicone sealant with a wide temp range tolerance. I also used red loctite on the bolts as well. The factory bolts had them when I removed the old rack, so I followed the same protocol when I installed the new bolts.
How much weight can it hold?
Not sure but it's probably around 1000lbs static weight or little less
Looks just like the greenlane rack. So is this an alibaba rack or what?
Why don't you show before and after footage..
tool list need for this install?
Sorry we didn't get to list it and it's been so long we don't remember
Are the simultaneous music and lawnmower noises really necessary?
what kinda ladder is that?
Gobi ladder
A widdle wadder
Nice how to. Only knock would be to ditch the background music.
Nice video... but very jerky filming... i'm sea sick
Great video but that music was very distracting.
THATS A LOT OF SCREWS TO WORK LOOSE !!!! MODULAR NOT THE ANSWER FOR ROOF RACKS
Good install vid! Would be nice to wrap up the vid with updates about wind noise and open moon roof clearance with bars 2 & 3 in place