Excellent interview - this was is a dream of mine - to sit and get to pick Jordi brain.. he is great at explaining things and just being real - you asked some great questions 👍🏼👍🏼 thank u so much for getting this interview out to the peeps 🎉🎉
"Sag is Just a place to start" First place to start is actually to take your brand new Fox 36 and rebuild it, remove all the excess excess excess grease that's blocking up the negative air chamber.
I've seen most of the dialed episodes and the way they approach a tuning problem is so simple and easy. we just have to be disciplined in what we do!. Love the show and Jordi!
HA Zero click - as an IT guy counting the first as Zero is absurdly normal. Hearing Jordi explain from a "normal human" point of view made me laugh at the stupidity of the IT world's use of Zero as the 1st :)
Every time I set fork sag as recommended the fork feels harsh to me. I have to reduce pressure quite a bit to get my fix forks to feel supple. 15-20% sag just beats the crap out of my hands. For instance on my Fox 38 it recommends 91 psi for my weight. I have had to drop the pressure to about 65-70 to get the fork to feel comfortable. At that pressure the 15-20 percent sag goes out the window. What am I missing?
@@nomadcarpenter8549 I was about to say that. I was always chasing supple feel, and with trial and error I found that actually stiffening your suspension gave me more supple feel. I realised that I was trying have my suspension to observe every bump possible and after many trials I realised I just need to eliminate that first initial contact and float on top of everything else. This set up gave me way better feel and support. I dig it now.
Are you sure there's no "shift point" between high and low speed damping? Usually there is a "knee" point in a shaft speed vs damping force plot. Please consider showing some graphical info in these kinds of discussions, thanks!
Great video!! You asked what would he change for a bike park setting with big hits but he went on another subject. What would be the answer to that ? Thank you 👍🏻
One issue I'd love to see Jordi address is fork bushing tolerances and how they affect damping. I sent my 38 in for bushing knock and asked them to burnish the new bushings and the difference was night and day. I had to add pressure and one volume token, and the Fox recommended settings were now darn close to perfect... before they were not. I think this is a tough one to address because the truth is there's a lot of variability in bushing tolerances in new forks, so having a factor rep tell you your new fork would greatly benefit from a bushing service right off the bat might be a topic they'd rather avoid?
great guidance. Sag is important, but just a starting point and based on weight. Rebound is based on air pressure and weight more than preference. Compression is not progressive, but controls valving and controls 'firmness' throughout the stroke, one for general riding (low) and one for big hits (high) volume spacers are required if you bottom regularly at sag, or if you don't at all (add/remove)
dunno, I feel like the temperature affects the suspension a ton. LIKE a lot. dunno what were you talking about in terms of degrees, but 10 degrees in C affects it a lot. The rebound becomes much slower and the fork dives much more (currently running the coil in the rear). So in winter I tend to run 5-10 more PSI when inflating the fork at home to compensate for the difference.
I found that it only affects the first two minutes or so when riding downhill, after that (especially forks) oil warms up and feel like previous temperatures. I think mellow/slower riders won't get the oil moving as much as someone more aggressive on the descends
Jesus, this jordi guy OVERCOMPLICATES everything. ITs a simple thing dude, it's not rocket science. Keep it simple. (don't let your insecurity puff up and amplify what it really is)
Seriously the best once you’ve gone through the dialed series, and getting your head to really start to wrap your head around suspension, this is a good dive into the details. And hey, great production as well.
Great interview with Jordi? Great choice. How could you go wrong. You nailed the questions and had him answer so many questions with different scenarios that were all understandable. So great to watch him on Dialed. So knowledgeable and personable.
Love the opening response, people worrying about weird details without understanding the basics. "I heard this on the internet, someone said that" but hardly anyone actually understands the engineering. I don't mean this as a gatekeeping thing, the engineering is not complicated. It's just easier to pick up on one thing someone said on a forum once than engage your brain in understanding the theory in a holistic sense.
this is my experience as a novice-intermediate rider. i really dont know what feels right, let alone what would improve my bike's performance. i also think you gotta be really attuned to what you like and dislike about the bike feel, that can only come from riding a lot with that i invest a day of my time out in the trails slowly setting sag, rebound, compressions and bracketing them and arriving at a sweet spot for myself as a trail rider focused on comfort.
I could listen to Jordi talk about bike suspension all day long. Every time I do I glean a little bit more about what to pay attention to when messing with suspension and how to understand it and get a really good feeling bike setup, and how it all relates to an overall setup, and what to look for and what to expect from speeding up or slowing down rebound, and when to add or remove compression.
GREAT VIDEO Thoughtful questions, thorough answers, and all of the questions we've been wanting to ask Jordi ourselves! Awesome work + thank you a ton!
Jordi you saved me from buying a new bike!!! I was so frustrated with my Trek Fuel Ex 8 until I watched this video and others of yours. 1 hour in the garage using your advice and my bike rips!!!!!! Thank you!!!!!
You lost me at 15-20% sag 😂. Clearly ain’t 100kg and riding the Lake District and Scotland regularly. Rough a feck massive long descents + 15-20% sag do not make happy bedfellows!
Because one click makes the world off a difference, the guy isn’t working with your average rider his working with the 0.01% of the sport at the highest level. When you have multi million dollar teams wanting to win they are gonna do anything they can to win. Just like any other sport with suspension if it’s not set up correctly they loose confidence which loses alot of time. This video is perfect for someone who is average wanting to take there Riding to the next level and make them faster then ever before
Excellent interview - this was is a dream of mine - to sit and get to pick Jordi brain.. he is great at explaining things and just being real - you asked some great questions 👍🏼👍🏼 thank u so much for getting this interview out to the peeps 🎉🎉
it's a pleasure
"Sag is Just a place to start" First place to start is actually to take your brand new Fox 36 and rebuild it, remove all the excess excess excess grease that's blocking up the negative air chamber.
Ai tech will work wonders on bike suspension in the future for sure
I 100% agree
This video is exactly what I was waiting for! And finally someone is asking all the right questions
Thanks Stefan, glad you enjoyed it.
Getting clearing answers on suspension from the experts can be challenging. Well done articulating the questions we all want to ask.
Thank you John
I've seen most of the dialed episodes and the way they approach a tuning problem is so simple and easy. we just have to be disciplined in what we do!. Love the show and Jordi!
Glad you've been enjoying it.
HA Zero click - as an IT guy counting the first as Zero is absurdly normal. Hearing Jordi explain from a "normal human" point of view made me laugh at the stupidity of the IT world's use of Zero as the 1st :)
Every time I set fork sag as recommended the fork feels harsh to me. I have to reduce pressure quite a bit to get my fix forks to feel supple. 15-20% sag just beats the crap out of my hands. For instance on my Fox 38 it recommends 91 psi for my weight. I have had to drop the pressure to about 65-70 to get the fork to feel comfortable. At that pressure the 15-20 percent sag goes out the window. What am I missing?
Are you over compensating with compression damping
@@nomadcarpenter8549 I was about to say that. I was always chasing supple feel, and with trial and error I found that actually stiffening your suspension gave me more supple feel. I realised that I was trying have my suspension to observe every bump possible and after many trials I realised I just need to eliminate that first initial contact and float on top of everything else. This set up gave me way better feel and support. I dig it now.
Are you sure there's no "shift point" between high and low speed damping? Usually there is a "knee" point in a shaft speed vs damping force plot. Please consider showing some graphical info in these kinds of discussions, thanks!
Interesting point on the rebound affecting the bike’s balance and cornering. I’ll play with it next ride.
I love this nerdy, super technical content
Great video!! You asked what would he change for a bike park setting with big hits but he went on another subject. What would be the answer to that ? Thank you 👍🏻
One issue I'd love to see Jordi address is fork bushing tolerances and how they affect damping. I sent my 38 in for bushing knock and asked them to burnish the new bushings and the difference was night and day. I had to add pressure and one volume token, and the Fox recommended settings were now darn close to perfect... before they were not. I think this is a tough one to address because the truth is there's a lot of variability in bushing tolerances in new forks, so having a factor rep tell you your new fork would greatly benefit from a bushing service right off the bat might be a topic they'd rather avoid?
I had the same issue on my factory 38
As someone who doesn't even notice when I forget to unlock my shock, I can confidently say that this is good advice 👌.
😂
Happy New Year Chris! Really looking forward to this podcast with Jordi, love watching the Fox Dialed episodes, I’ve learnt a lot from watching those!
Happy New Year to you too! Stoked that you're excited for this one. I hope it lives up to expectations!!
great guidance. Sag is important, but just a starting point and based on weight. Rebound is based on air pressure and weight more than preference. Compression is not progressive, but controls valving and controls 'firmness' throughout the stroke, one for general riding (low) and one for big hits (high)
volume spacers are required if you bottom regularly at sag, or if you don't at all (add/remove)
I'm glad you enjoyed it
dunno, I feel like the temperature affects the suspension a ton. LIKE a lot. dunno what were you talking about in terms of degrees, but 10 degrees in C affects it a lot. The rebound becomes much slower and the fork dives much more (currently running the coil in the rear). So in winter I tend to run 5-10 more PSI when inflating the fork at home to compensate for the difference.
I found that it only affects the first two minutes or so when riding downhill, after that (especially forks) oil warms up and feel like previous temperatures. I think mellow/slower riders won't get the oil moving as much as someone more aggressive on the descends
@@DavidFoundCo maybe, but I tend to ride up to about -5 or so
@@ostankovalex1176 I rode in 28 degree Fahrenheit last week and that’s what I noticed on my setup, I didn’t make any changes
Yeah, notice it for sure around freezing or below!
Fantastic discussion, really interesting and informative! ! I really enjoyed it, so much I can see myself watching it again. Well done!
That's great to hear, thanks
So basically this video should be watched by every owner of Fox suspension...
Top work Chris. Way to kick off the year!
Thanks Tim, glad you found it useful.
Feel over numbers!!!
Can’t wait for this one, Jordi is one rad dude!
He sure is. I certainly learned a lot from him in this chat.
Jesus, this jordi guy OVERCOMPLICATES everything. ITs a simple thing dude, it's not rocket science. Keep it simple. (don't let your insecurity puff up and amplify what it really is)
This video was helpful for me. I'll have to watch this again.
great to hear, thanks
Seriously the best once you’ve gone through the dialed series, and getting your head to really start to wrap your head around suspension, this is a good dive into the details.
And hey, great production as well.
Thank you!
great questions...thank you!
Thanks Ross!
Great interview with Jordi? Great choice. How could you go wrong. You nailed the questions and had him answer so many questions with different scenarios that were all understandable. So great to watch him on Dialed. So knowledgeable and personable.
Thanks Kent, glad you enjoyed it
Love the opening response, people worrying about weird details without understanding the basics.
"I heard this on the internet, someone said that" but hardly anyone actually understands the engineering.
I don't mean this as a gatekeeping thing, the engineering is not complicated.
It's just easier to pick up on one thing someone said on a forum once than engage your brain in understanding the theory in a holistic sense.
Glad you enjoyed it. Also, love the username!
It used to be accurate but now it's ironic because I comment on everything.
@@rarelycomments 🤣
Exactly what I expected from Jordie.
It's not your suspension, it's just you 😅 100% agree
🤣
Great interview. Please do more with him.
Thanks Fred, will do!
this is my experience as a novice-intermediate rider.
i really dont know what feels right, let alone what would improve my bike's performance.
i also think you gotta be really attuned to what you like and dislike about the bike feel, that can only come from riding a lot
with that i invest a day of my time out in the trails slowly setting sag, rebound, compressions and bracketing them and arriving at a sweet spot for myself as a trail rider focused on comfort.
I could listen to Jordi talk about bike suspension all day long. Every time I do I glean a little bit more about what to pay attention to when messing with suspension and how to understand it and get a really good feeling bike setup, and how it all relates to an overall setup, and what to look for and what to expect from speeding up or slowing down rebound, and when to add or remove compression.
You literally asked all questions that I have been thinking on when I was trying to understand what is what. lol
Great to hear, thanks
Happy New Year Chris! Thanks for the cool interview.
Same to you Matt, thanks!
What's your take on putting more tokens than you need? say 3/4 and lowering the overall pressure to make fork very plush at the start?
Loved listening to this!
thanks mate, stoked you liked it.
fantastic video. I paused it a couple times to run out and check what my Fox sus is at.
I always wondered if you start from fully closed and count the first click as click #1. That was a great question
Thanks, me too!
If you're a programmer, the first is usually 0.
Do you all set your rebound open for sag?
When Jordi talks i listen
Ha
GREAT VIDEO
Thoughtful questions, thorough answers, and all of the questions we've been wanting to ask Jordi ourselves!
Awesome work + thank you a ton!
thanks Luke, stoked to hear that!
Thanks Jordi. :)
Don't think......feel
That's the one
Thanks Guys
it's a pleasure
Definitely one of the better videos on MTB suspension. :)
thank you
Awesome interview!
Thanks Greg!
awesome
Glad you enjoyed it
One of the best discussions on suspension yet!
Awesome, glad you liked it.
Jordi you saved me from buying a new bike!!! I was so frustrated with my Trek Fuel Ex 8 until I watched this video and others of yours. 1 hour in the garage using your advice and my bike rips!!!!!! Thank you!!!!!
Great to hear that the episode helped you!
I am subscribed to your podcast now 👍
@@SmokinSober good to hear, thanks!
Excellent, well worth listening to all of it.
Thanks, glad it was useful.
You lost me at 15-20% sag 😂. Clearly ain’t 100kg and riding the Lake District and Scotland regularly. Rough a feck massive long descents + 15-20% sag do not make happy bedfellows!
I am 105kg with gear. I use somewhere around 20% sag but I run compression more open than what fox recommends.
i dont know why people treat MTB suspension like it’s rocket science smh 🤦♂️
Because one click makes the world off a difference, the guy isn’t working with your average rider his working with the 0.01% of the sport at the highest level. When you have multi million dollar teams wanting to win they are gonna do anything they can to win. Just like any other sport with suspension if it’s not set up correctly they loose confidence which loses alot of time. This video is perfect for someone who is average wanting to take there Riding to the next level and make them faster then ever before
Maybe because they take their sport a bit more seriously than you…?
@@Bonky-wonky it’s still not NASA technology and or that hard click rebound blah blah blah
@@tylersvensson4468 they’re not riding for multi million dollar teams lmfaooo haha
Then don't watch.
Very good info and explained perfect. You put great questions to him.
Thank you!