There had a recall on some traverse to replace the fuel pump , did you receive any letter about?what's wrong with the fuel pressure sensor, there are not known for that? What's the symptom
@@steevegmtech7326 2 weeks ago I got code p0442 shop did a smoke test on my 2018 chevy traverse n said it was canister purge valve, I replaced it n check engine light went off, 8 days later it comes bk on. I take it 2 auto zone to scan and I got code p0455 n was told my fuel tank pressure sensor need 2 be replaced. Today I noticed when I put the vehicle into drive to take off it took a min 2 accelerate. My question what else will give the code p0445. My traverse do not have a gas cap
I got the po442 code on mine, replaced the purge valve but the CEL is still on. What should I do next? I’ve seen some videos that say you need to drive it around a few times and shut the vehicle off so the light goes away
Im getting code P0442 small evaporate leak. Took it 2 shop saying 450 to replace canister. My question is which value do i purchase so i can only pay for labor
Question! If I did this & cleared the code & for some reason it ended up being the canister for instance, would the check engine light come back on? Only reason I ask, is according to the p0496 code it could the the canister of the purge valve. Normally it’s 3 key cycles to trigger an engine light, right? I just want to address the least expensive option of course!
Here is the link for the evap purge valve
amzn.to/3KcNR6S
Thank you!❤️
You welcome 👌
Thank you so much for this video! Your step by step instructions saved me from an afternoon of anger and cursing.
You welcome 👍 and thanks for watching
Great video, thank you! - Replaced this and got rid of my CEL (P0496)
You welcome,glad I was able to help 😊
Did the code immediately go away or did you have to drive it for a while ? I just replaced mine and the check engine is still on .
It will stay until you clear it ,or you can unplug the battery for a few minutes
I have the same year and I am going to have to change out a second one today. Last one was like 5 years ago.
Not surprised lol
Thank you for making this video
You welcome 👍
Can you make a video about replacing the fuel tank pressure sensor on 2019 Chevy Traverse. There are none on UA-cam
There had a recall on some traverse to replace the fuel pump , did you receive any letter about?what's wrong with the fuel pressure sensor, there are not known for that? What's the symptom
@@steevegmtech7326 2 weeks ago I got code p0442 shop did a smoke test on my 2018 chevy traverse n said it was canister purge valve, I replaced it n check engine light went off, 8 days later it comes bk on. I take it 2 auto zone to scan and I got code p0455 n was told my fuel tank pressure sensor need 2 be replaced. Today I noticed when I put the vehicle into drive to take off it took a min 2 accelerate. My question what else will give the code p0445. My traverse do not have a gas cap
P0455 usually mean indicates a small leak in the evap system, they would have to smoke test the system to find the leak
I got the po442 code on mine, replaced the purge valve but the CEL is still on. What should I do next? I’ve seen some videos that say you need to drive it around a few times and shut the vehicle off so the light goes away
Did you clear the code?or at least unplug the battery
Thanks ! Looked like a bigger pain than it actually is.
Not at all about, 10 min in and out , they are all easy to replace, doesn't matter the configuration
Thanks for watching 😊
Im getting code P0442 small evaporate leak. Took it 2 shop saying 450 to replace canister. My question is which value do i purchase so i can only pay for labor
Usually the purge valve wouldn't set a p0442, do you have other code?
How long do I need to drive it before I can pass the inspection? I changed mine the light is not on but when u plug in the scanner it still shows up
@@ryanhardyal4870 about 200 miles, what code is set
@ thanks, p0442
Does the check engine light have to be cleared after repair?
Yes or just unplug your battery,and plug it back in, you should be fine
@@steevegmtech7326 thank you sir
Question! If I did this & cleared the code & for some reason it ended up being the canister for instance, would the check engine light come back on? Only reason I ask, is according to the p0496 code it could the the canister of the purge valve. Normally it’s 3 key cycles to trigger an engine light, right? I just want to address the least expensive option of course!
The least expensive option is the purge valve,i've never replaced the cannister for the m that code, alslways the purge valve
Also, use the OEM AC Delco brand. I learned that using aftermarket for this part will cause the code to come back.
Brought mine to the dealership to fix P0455 engine code, after 2 days engine light came back with the same code. What went wrong?
Check your gas cap,it might not be sealing properly
@@steevegmtech7326 they said it isnt. They also did smoke test. So idk why engine light keeps coming back
What was the bit used to remove the screw from the engine cover?
amzn.to/40V0Hgr
The easiest engine to work on with this 2nd gen traverse.
A lot of working room, i like them