This guy is a magician. Always comes out with the video you needed the day after you finish the job. Shits too calculated. He's watching every one of us. What a legend.
It's nice being able to see a video using the exact hinges I'll be using. Thanks edit: BTW I have the same Kreg jig for drilling the hinge holes. What I did was try to measure the distance from the edge guide of the jig to where the center of the hole would be (the drill center), since the guidelines on the jig are configured from the edge of the door which is kind of useless for this part of the operation. I made a 7/16" spacer (best guess) to put between the jig and the edge of the door. Thanks for the tip about using a test piece, because I actually needed to set the Kreg jig on "5" to put the hole in the right place.
I very amateur DIY fixed some cupboard doors last year. Spent ages trying to find the right hinge and ended up with ones like yours. Also had to chisel out the edge because for some reason they didn't make them round. Also had ti fill in the holes from the old ones. It doesn't look right but, works better than before!
You wouldn't believe just how timely these last few videos you made are to me... I made the decision to change my cab doors a day before your first vid was posted. Thank you so much ))
Omg...I just came home from doing this exact job with also doing adjustments with their old hardware that was still in good working condition. Anyway, great video as always!
Hi from Montreal. Very instructive video and Channel. I am replacing my cabinet door and one of them is a corner door. I have a question, Do the Hinges have a special installation position? I am asking becouse in my old coner door all driled holes for the hinges are in one (firsst) door; however in the new one each dor has them drill holes. I have the correct hinges; however, they have an special direction to be installed?
Sometimes I’ll use a 1-2mm chamfer router bit to go over the back edges where makes a 90°, to help “close” etc….. Might not be necessary at at all, but on older homes (even new) it can help when opening…. (Same thing when doing a frameless closet door (or concealed door) in a home & using Sugatsune or Soss hinges; can help if running into closing/opening clearance troubles
Snug fit? Just wax the heck out of it, as skaters would do! 🤓 Came here from the other channel, and i have to say that i'm happy discovering this one! I like the way you explain things, professional but enjoyable too! I'm gonna stay around to learn more and hope you the best :)
I have pocket hindges on my vanity mirror and the mirror is rubbing against the bottom. I don't know how to fix it. I think the mirror has to move a few mm up but I don't see a screw that moves it up.
Hey I just saw per USG manufacturer instructions there should be a slight gap between butt joints in drywall, cut and prefilled. They should not be touching. I know you've gone over this a lot but this is the first I've seen per manufacturers instructions. What are your thoughts on this?
I just wanna' say bummer, sounds like the mic cord or connection was worn/bad, nothing worse than shooting a whole bunch and finding crap audio later, so disheartening, kudos for patching it up and turning it around! :-)
![How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]](/img/n.gif)
Great video. My wife saw this and now she wants to update the kitchen. Thank you for the extra work this summer.
BEN, AND THAT'S THE NICE GUY YOU ARE!!! GOD BLESS YOU AND YOUR FAMILY...
Perfect timing, I'm making the doors for a corner unit right now. I wasn't sure what to do with hinges and this helped so much.
This guy is a magician. Always comes out with the video you needed the day after you finish the job. Shits too calculated. He's watching every one of us. What a legend.
It's nice being able to see a video using the exact hinges I'll be using. Thanks
edit: BTW I have the same Kreg jig for drilling the hinge holes. What I did was try to measure the distance from the edge guide of the jig to where the center of the hole would be (the drill center), since the guidelines on the jig are configured from the edge of the door which is kind of useless for this part of the operation. I made a 7/16" spacer (best guess) to put between the jig and the edge of the door. Thanks for the tip about using a test piece, because I actually needed to set the Kreg jig on "5" to put the hole in the right place.
I very amateur DIY fixed some cupboard doors last year. Spent ages trying to find the right hinge and ended up with ones like yours. Also had to chisel out the edge because for some reason they didn't make them round. Also had ti fill in the holes from the old ones. It doesn't look right but, works better than before!
Looks fantastic! Now when I get around to my cabinets I'm going to be tackling them with a lot more confidence and knowledge. Thank you!
I just want to thank you for those great and helpful videos you make, this was another great one. The instructions are so helpful and to the point
You wouldn't believe just how timely these last few videos you made are to me... I made the decision to change my cab doors a day before your first vid was posted. Thank you so much ))
Awesome!
Omg...I just came home from doing this exact job with also doing adjustments with their old hardware that was still in good working condition. Anyway, great video as always!
Nice work VC! Like your channel.
Vancouver Drywaller, coming in clutch as always
Yeah, it works spectacularly well from my house too! 😁
Ben where were you when we were looking for good tenants? Great job, thanks so much.
Well done getting the cupboard doors worked out. Have to say well done to the people who invented the hinges also. Cheers Ben 🦘🇦🇺
Great tips as usual! I'm building a closet and want to use the Ikea's Hovet mirror for the door. What hinges should i use?
Hi from Montreal. Very instructive video and Channel. I am replacing my cabinet door and one of them is a corner door. I have a question, Do the Hinges have a special installation position? I am asking becouse in my old coner door all driled holes for the hinges are in one (firsst) door; however in the new one each dor has them drill holes. I have the correct hinges; however, they have an special direction to be installed?
For this corner bi-fold door - is there a rule where the cabinet hinge should go - smaller or bigger portion of the bi-fold door ?
works perfect from my house too
Sometimes I’ll use a 1-2mm chamfer router bit to go over the back edges where makes a 90°, to help “close” etc….. Might not be necessary at at all, but on older homes (even new) it can help when opening…. (Same thing when doing a frameless closet door (or concealed door) in a home & using Sugatsune or Soss hinges; can help if running into closing/opening clearance troubles
Snug fit? Just wax the heck out of it, as skaters would do! 🤓
Came here from the other channel, and i have to say that i'm happy discovering this one! I like the way you explain things, professional but enjoyable too! I'm gonna stay around to learn more and hope you the best :)
I have pocket hindges on my vanity mirror and the mirror is rubbing against the bottom. I don't know how to fix it. I think the mirror has to move a few mm up but I don't see a screw that moves it up.
Hey bro any idea where the heck to find Plus 3 compound in Canada? I can't find it anywhere!
What degree hinge is best for a Diagonal wall , Euro cabinet?
Nice i wish i could also do that here in my house(philippines)
Hey I just saw per USG manufacturer instructions there should be a slight gap between butt joints in drywall, cut and prefilled. They should not be touching. I know you've gone over this a lot but this is the first I've seen per manufacturers instructions. What are your thoughts on this?
Where do I find links to hinges?
What kind door hinge is it
👍👍
Why would I want cabinet advice from a drywaller??? ;)
That's the joke.
Jesus Christ you beat around the bush.
I just wanna' say bummer, sounds like the mic cord or connection was worn/bad, nothing worse than shooting a whole bunch and finding crap audio later, so disheartening, kudos for patching it up and turning it around! :-)
Listen dont mean to be rude but we need some more skate videos man!! Stop ducking us lol.