I found with the little Black and Decker unit I bought, that adjusting the Finish-Jet Dry is at the lowest setting which is 1, the dishes are spotless. Less chemical residue on the dishes, and you save money.
I just bought one from London Drugs! It's been discontinued. So far so great, and as you say, the height is perfect! Apparently if I remove the wheels I can build it in, eventually, when my kitchen flooring gets redone. The only info I cannot find is on cycle length. Anyway thank you for the review! I love how simple it is.
Yes it is a nice machine. You are right, unless you time them yourself, there is no reference to cycle length. After using all the cycles, I have settled on the fastest one called the SPEED setting. My dishes always come out clean and it shortens the time you have to listen to it do it's thing. Thanks for commenting.
We bought our 2 years a go March 2018 we love it but I've noticest when u finish pack and u put it on normal or light it dosent rins all the soap so I break the dish soap packs in half , ill be going back to powders then I can controll how much soap
I just got a portable dishwasher but unfortunately my faucet is one of those spray faucet. I took the spray out which leaves me the line (smaller hose) and I try to connect it to the dishwasher but the water pressure starts spraying due to the pressure. Is there a way to connect the line to the portable dishwasher? I would hate to replace my entire sink because of a faucet issue.
I bought the rca countertop dishwashing unit and I love it! Considering buying my sister this unit for christmas. I can get it on Sale at London drugs in Canada for $379
I know this post is old but what kind of soap do you use the tablets are not dissolving and the top pops open not sure if it’s meant to do that or a malfunction the manufacturer has been of no help
Hi! I have purchased this dishwasher a few weeks ago and it’s been great! I went to run it today. When I hooked the tubes up to the sink and turned the water on (hot, full pressure) water was shot at my face! It must not be hooking up tightly to my sink faucet. Have you ever had this happen with yours? And do you have any tips on how to fix? The dishwasher was ran yesterday by my roommate and she didn’t have a problem with it.
There are only 2 things to look for here. #1 Make sure the adapter fitting is tight on the tap. This is not your problem because you said your roommate didn't have a problem with leakage. But what your roommate did right was to properly attach the hose to the tap. #2 Make sure you retract the upper ring on the hose. Put one hand on the top of the tap and press the hose firmly on the tap with the other hand, let go of the ring and make sure it snaps securely on the tap. You may have to retract the hose ring several times to get it to seat properly. Good Luck, it's a great little dishwasher.
Hi! Thanks for your fast reply. After some fiddling with the adaptor I learned that the adaptor is fitting onto the sink faucet fine. However the water intake hose doesn’t seem to be taking any water. When I unscrew the hose from the attachment the water flows out the water intake hole just fine and doesn’t shoot any water out the top. But as soon as the hose is reattached it starts spewing again. Thanks for all your help.
@@bewareofbubblez If you have water leaking from the adaptor on the tap, then you have the wrong adaptor on the tap. I did some online searching and I think, but am not positive that Kenmore and Whirlpool share the same tap fitting. Find a whirlpool dealer and see if they can help you. Lets get that dishwasher to work!
It is the adapter that I had received when I purchased the dishwasher but it may be faulty. I am just confused why when I unscrew the hose from the adapter the water doesn't leak and flows like it is suppose to, but when the hose is attached to the adapter there is a problem with it. Thank you so much for troubleshooting with me. I have scoured online for answers and are unable to find any. Will look into Whirlpool for help and possible replacement part.
Sorry for the delayed response but I have been under the weather for a week or so. The tap i'm using was purchased from Amazon. Moen 7434 Chateau One-Handle Low Arc Faucet (Chrome) $136.67 CDN
Bought a Sears kenmore model 687 portable dishwasher three months ago, to date I still can’t get the fittings to mate the hose line to the kitchen tap. Sears no longer exists so I’m caught in the middle. Bad decision on my behalf to buy from a bankrupt company, washer was incomplete and I could not return for a refund.
Mario, I did some online searching and I think, but am not positive that Kenmore and Whirlpool share the same tap fitting. Find a whirlpool dealer and see if they can help you. Lets get that dishwasher to work!
I found with the little Black and Decker unit I bought, that adjusting the Finish-Jet Dry is at the lowest setting which is 1, the dishes are spotless. Less chemical residue on the dishes, and you save money.
Thanks I've ordered one taking your word hope mines good.
Hi! Are you still using this? How long did it last?
I just bought one from London Drugs! It's been discontinued. So far so great, and as you say, the height is perfect! Apparently if I remove the wheels I can build it in, eventually, when my kitchen flooring gets redone. The only info I cannot find is on cycle length. Anyway thank you for the review! I love how simple it is.
Yes it is a nice machine. You are right, unless you time them yourself, there is no reference to cycle length. After using all the cycles, I have settled on the fastest one called the SPEED setting. My dishes always come out clean and it shortens the time you have to listen to it do it's thing. Thanks for commenting.
Do you turn the water on hot or cold?
Thank You, I'am getting one now ;0!!!!!! I'am tired of washing my dishes by hand in my small kitchen ;)
We bought our 2 years a go March 2018 we love it but I've noticest when u finish pack and u put it on normal or light it dosent rins all the soap so I break the dish soap packs in half , ill be going back to powders then I can controll how much soap
Thanks for sharing. I've been considering a portable dishwasher for 2 yes.
Looks to be a great little machine!
We got it is great Thanks for knowledge.
Thanks for your review. Help me a lot. 👍❤️
I just got a portable dishwasher but unfortunately my faucet is one of those spray faucet. I took the spray out which leaves me the line (smaller hose) and I try to connect it to the dishwasher but the water pressure starts spraying due to the pressure. Is there a way to connect the line to the portable dishwasher? I would hate to replace my entire sink because of a faucet issue.
What kind of adapter did you use? I have a screw on faucet.
Does it dry as well?
I have one. It does at Normal and Heavy settings.
Mine is leaking terribly, where you attach it to the tap. Any ideas on how to fix it ? It is wasting so much water.
I bought the rca countertop dishwashing unit and I love it! Considering buying my sister this unit for christmas. I can get it on Sale at London drugs in Canada for $379
Do you know the name brand of your facet? I have to replace mine because it’s not compatible
I know this post is old but what kind of soap do you use the tablets are not dissolving and the top pops open not sure if it’s meant to do that or a malfunction the manufacturer has been of no help
How long are the hoses?
Between 32 and 35 inches.
Hi! I have purchased this dishwasher a few weeks ago and it’s been great! I went to run it today. When I hooked the tubes up to the sink and turned the water on (hot, full pressure) water was shot at my face! It must not be hooking up tightly to my sink faucet. Have you ever had this happen with yours? And do you have any tips on how to fix? The dishwasher was ran yesterday by my roommate and she didn’t have a problem with it.
There are only 2 things to look for here. #1 Make sure the adapter fitting is tight on the tap. This is not your problem because you said your roommate didn't have a problem with leakage. But what your roommate did right was to properly attach the hose to the tap. #2 Make sure you retract the upper ring on the hose. Put one hand on the top of the tap and press the hose firmly on the tap with the other hand, let go of the ring and make sure it snaps securely on the tap. You may have to retract the hose ring several times to get it to seat properly. Good Luck, it's a great little dishwasher.
Hi! Thanks for your fast reply.
After some fiddling with the adaptor I learned that the adaptor is fitting onto the sink faucet fine. However the water intake hose doesn’t seem to be taking any water. When I unscrew the hose from the attachment the water flows out the water intake hole just fine and doesn’t shoot any water out the top. But as soon as the hose is reattached it starts spewing again.
Thanks for all your help.
@@bewareofbubblez If you have water leaking from the adaptor on the tap, then you have the wrong adaptor on the tap. I did some online searching and I think, but am not positive that Kenmore and Whirlpool share the same tap fitting. Find a whirlpool dealer and see if they can help you. Lets get that dishwasher to work!
It is the adapter that I had received when I purchased the dishwasher but it may be faulty. I am just confused why when I unscrew the hose from the adapter the water doesn't leak and flows like it is suppose to, but when the hose is attached to the adapter there is a problem with it. Thank you so much for troubleshooting with me. I have scoured online for answers and are unable to find any. Will look into Whirlpool for help and possible replacement part.
What facet do you have? I need compatible facet
Sorry for the delayed response but I have been under the weather for a week or so. The tap i'm using was purchased from Amazon. Moen 7434 Chateau One-Handle Low Arc Faucet (Chrome) $136.67 CDN
Where or how do I order this faucet part
Bought a Sears kenmore model 687 portable dishwasher three months ago, to date I still can’t get the fittings to mate the hose line to the kitchen tap. Sears no longer exists so I’m caught in the middle. Bad decision on my behalf to buy from a bankrupt company, washer was incomplete and I could not return for a refund.
Mario, I did some online searching and I think, but am not positive that Kenmore and Whirlpool share the same tap fitting. Find a whirlpool dealer and see if they can help you. Lets get that dishwasher to work!
My dishwasher is at work right now. She'll be home around 5.
If she sees this post, I hope you enjoy your stay on the couch!