Omg THANK YOU!!!! Two rings from one end of the canister popped out and no other disassembly video went into as much detail as you. The pieces are finally back in place!! 😭🎉
I service / repair $500K+ machine tools so I have seen some very exquisitely engineered designs. I repair our vehicles and everything in the home including our 3 dysons. I have been deep inside 2 of them and was very impressed. The engineering is brilliant, built well and the quality of material to me is above average. As with anything, common sense use and maintenance go hand in hand. Years of hard use, abuse, drops and our kids hands on them, I will buy another dyson if ever need another vacuum. I can appreciate the effort it took to make this video, thank you for doing it. It popped up on google with me looking for a new power connector in the motorhead, which I broke. It stopped working, teardown revealed an open short in the white wire deep inside. Easy fix. I haven't looked through your videos but if you want a fun one, a complete teardown on a DC65 ball! Just my 2 cents, happy vacuuming!
i only do the small battery power ones. the reason is these is because these are the item people mostly buy and it is not as complex. no one watches the complex one. therefore it is a waste of money just to buy it for disassembly if you look at my comments, you will see people complain that it is too complex
Phenomenal video, have this Dyson and not a lick of trouble for about 5 years I think. The the handle cracked due to stress. This helped with replacing the handle/trigger assembly!! Well done!!!
Thanks man, this video helped me repair the vacuum myself with a €9 part, instead having to pay for an outside of warranty repair or perhaps even buy a whole new one.
Excellent Video! Helped me perfectly while changing the broken Housing of my 6 years old V10. Okay...the speed selector now works vice versa and medium speed isn't avaiable anymore....but that has nothing to do with this awesome & detailed instctional vid. THX! ❤
@@King_subie I looked it up on Amazon ‘dyson v10 trigger’. It’s not an original Dyson replacement, those might be far more expensive (if available at all)
grazie infinite! ero indeciso se buttarlo e prenderne uno nuovo piuttosto che spendere 200 euro x riparare un elettrodomestico di 4 anni.....non è stato semplice, soprattutto riattaccare il pezzo con il pulsante al manico (ho utilizzato un lubrificante x far scivolare la gomma nel buco) x il resto grazie alle tue spiegazioni precise è stato anche divertente. top
You are very lucky because you can open the canister. Today, for the first time after three years of use, I cannot open the canister file because the red opener does not move. Totally stuck. I can throw the vacuum cleaner in the garbage, but otherwise it worked very well. ☹
@@OpenMeUpTec Thank you very much for your reply. My husband poked it with a screwdriver last night until it finally got it working again. :)) Otherwise, would the service provider send parts for free, or would you have to pay again and again?
I took it all apart and back together with minimal issues. But now it is stuck in max. So battery doesn't last long enough to do the house like it used to. I took it apart and don't see any issues. But I also do not see anything that the slider would move or what actually makes it change settings. I am wondering if there is a missing part? Any suggestions
Awesome tutorial and very welcome. I bought this Dyson second hand, but it was very nasty, although the seller told me that it was hygenically cleaned. I'll let him know that if he has something cleaned, he shouldn't empty the sewage with it afterwards. Did you find a way to remove the inner connector? I'd like to also take that one out, as the part where it is in is as nasty as the rest of the vacuum.
if you watch my newer video it shows you how to remove it. it is normal for people to think it has been clean properly. until you watch my video may people would think it is clean as it is hard to disassemble
@@OpenMeUpTec In this case it was nothing about people not knowing, but deliberately lying about the condition of the vacuum. 😞 I'll search for the newer video, thanks.
I'm finding that carelessly discarded panties are somehow finding there way into the main filter as well, this has prompted a new dust filter inspection and cleaning protocol which will be implemented whenever the filter light is activated.
Hi there, the trigger connector (white clip attaching trigger to powerboard) do you have any idea what that would be called to replace it? Please and thanks!
i dont know what it is called. but i cant see how you can buy it even if you knew as it is not normal for that to break at all. therefore no one will be selling one
@@OpenMeUpTec the white clip on my V10 trigger had no mating connector on the circuit board. It appeared to have been glued to the board as once I pushed it aside (in the direction of the 2 wires) there was nothing on the PCB to reconnect it to, just 2 solder pads. I had to cut off the white clip and solder the 2 wires directly to the pads on the board. To make this easier I extended the 2 wires slightly and put heatshrink over the joins. In my case the red trigger plastic was not broken but after pulling the trigger assembly out, a short plastic cylinder fell out and that was what had stopped the trigger from operating, the trigger was staying in and permanently ON. The broken plastic was the receptacle for the torx screw up inside the handle that is removed after the battery is removed. I didn't bother trying to glue the broken piece back so that screw is no longer fitted
@@ewenfraser883 the plastic piece is the issue that many people have. since the screw doesnt hold the trigger in. the trigger slowly slides down which put the vacuum in the ON position. you can just push your battery back in so it will remove the pressure but slowly it will slide down again.
The white clip on my V10 trigger had no mating connector on the circuit board. It appeared to have been glued to the board as once I pushed it aside (in the direction of the red and black wires) there was nothing on the PCB to reconnect it to, just 2 solder pads. I had to cut off the white clip and solder the 2 wires directly to the pads on the board. To make this easier I extended the 2 wires slightly and put heatshrink over the joins.
DAYSON COMPLETAMENTE INCAPACI MA PARLANO INGLESE! Dayson aspirapolvere senza fili che si rompe facilmente: I progettisti Dayson sono dei DEMENTI, se monti l'elettronica a bordo motore per di più saldata rigidamente tramite i contatti dello stesso motore, portando di conseguenza tutte le vibrazioni e le risonanze del motore che ruota a 110.000 Rmp sull'elettronica, è normale che prima o poi si scassa, lo capisce anche un bambino, di fatti è il guasto più comune in pochi anni di vita. Con quello che costa questo aspirapolvere mi aspettavo un risultato almeno decente. Mi pare che più che aspirare polvere sia stata progettato solo per ASPIRARE SOLDI ai malcapitati che la comprano, di fatti è Britannica gli stessi che hanno fatto i vaccini insieme agli USA che fanno la Tesla!
This is crazy. We have to do this for customers recently with Dyson and shark because or their questionable design, all of the dust get trapped in the centre (unreachable) bit. Terrible terrible design. I charge customers £70 for this service since it takes about an hour if not longer. Just to clean your hoover so it actually sucks again! Dyson you absolute dick heads! Iphones are easier to repair than these. At least you can replace the motor on its own in these versions. The old design had the motor moulded into the handle so your have to replace the whole handle, plastic, trigger and motor. The world would be a less wasteful place if Dyson just left the industry.
cleaning it or not doesnt really change anything it will still work basically the same. dyson already gurantee that it doesnt lose suction. cleaning it really only removes the smell. for most people they never clean the unit and just bin it when it dies. you only need to clean it for 2 things really 1. it smells 2. you got something stuck inside
@@OpenMeUpTec Not true. It definitely resolved the issue if you take it all apart and clean it properly. It is bad design because you should see the clay which falls out and stuck in there. If I could attach a photo, I would. I would argue that is something stuck in there. When the micro dust build up to the point where it becomes clay then yes, this will mimic a block due to poor design.
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.
Omg THANK YOU!!!! Two rings from one end of the canister popped out and no other disassembly video went into as much detail as you. The pieces are finally back in place!! 😭🎉
thanks for your support
Excellent video. Thank you for being thorough and very in-depth while also adding typical fixes for issues sprinkled throughout the video.
thanks for your support
I service / repair $500K+ machine tools so I have seen some very exquisitely engineered designs. I repair our vehicles and everything in the home including our 3 dysons. I have been deep inside 2 of them and was very impressed. The engineering is brilliant, built well and the quality of material to me is above average. As with anything, common sense use and maintenance go hand in hand. Years of hard use, abuse, drops and our kids hands on them, I will buy another dyson if ever need another vacuum. I can appreciate the effort it took to make this video, thank you for doing it. It popped up on google with me looking for a new power connector in the motorhead, which I broke. It stopped working, teardown revealed an open short in the white wire deep inside. Easy fix. I haven't looked through your videos but if you want a fun one, a complete teardown on a DC65 ball! Just my 2 cents, happy vacuuming!
i only do the small battery power ones. the reason is these is because these are the item people mostly buy and it is not as complex. no one watches the complex one. therefore it is a waste of money just to buy it for disassembly
if you look at my comments, you will see people complain that it is too complex
Phenomenal video, have this Dyson and not a lick of trouble for about 5 years I think. The the handle cracked due to stress. This helped with replacing the handle/trigger assembly!! Well done!!!
Thanks man, this video helped me repair the vacuum myself with a €9 part, instead having to pay for an outside of warranty repair or perhaps even buy a whole new one.
thanks for your support
Greatly and professionally explained, I recommend anyone having problem with Dyson 10 to watch this video , excellent work thanks 🙏🏿
thanks for your support
Thank you VERY VERY MUCH guys for this precious video !! My Dyson works as new again !!
Excellent Video! Helped me perfectly while changing the broken Housing of my 6 years old V10. Okay...the speed selector now works vice versa and medium speed isn't avaiable anymore....but that has nothing to do with this awesome & detailed instctional vid. THX! ❤
you didnt put your speed selector back in properly.
correct, the rubber sealing of the circuit board didn't fit perfectly into the new housing. now fixed! thx
Thanks for a very clear guide! The plastic of my trigger was broken, I was able to glue it and add a bit of reinforcement.
thanks for your support
I had the exact same thing. I was able to find a (3rd party) reinforced replacement part for ~€9
@@JeroenNooteboshello. I have the same issue but can’t find the clip connector, do you have a part number or how did you find it?
@@King_subie I looked it up on Amazon ‘dyson v10 trigger’. It’s not an original Dyson replacement, those might be far more expensive (if available at all)
Very clear and precise instructions. Excellent video Many Thanks!
thanks for your support
Thank you so much!! Very fine debris inside unit that needed to be cleaned out.
thank you very much, you where very helpfull for the repair of my v10.
Tres bonne video tres bien expliqué 😊
Thanks a lot! Your video helped us to fix our vacuum cleaner😉
thanks for your support
Very very helpful video… thank you so much
thanks for your support
grazie infinite! ero indeciso se buttarlo e prenderne uno nuovo piuttosto che spendere 200 euro x riparare un elettrodomestico di 4 anni.....non è stato semplice, soprattutto riattaccare il pezzo con il pulsante al manico (ho utilizzato un lubrificante x far scivolare la gomma nel buco) x il resto grazie alle tue spiegazioni precise è stato anche divertente. top
can you please translate that to english so i can help you
You are very lucky because you can open the canister. Today, for the first time after three years of use, I cannot open the canister file because the red opener does not move. Totally stuck. I can throw the vacuum cleaner in the garbage, but otherwise it worked very well. ☹
dyson do provide replacement parts as they get wore after using it for sometime
@@OpenMeUpTec Thank you very much for your reply. My husband poked it with a screwdriver last night until it finally got it working again. :))
Otherwise, would the service provider send parts for free, or would you have to pay again and again?
Please update the video description to include the link to the video that demonstrates connector removal.
i have a new version again that shows it better at 22:00
ua-cam.com/video/n2O0zNCRKX4/v-deo.html
Excellent tutor . Complete 👍🏼
thanks for your support
Worked 😊basically just put the filter on wrong !🎉😅
See the purple bit to left of your video. That came off mine. Can it go back on
can you watch the video and tell me at what time i can see it
My v10 hepa filter I noticed there’s a lot of black tiny plastic residue what’s is that and it came from which part of the machine thanks
it is dust. may people think it is plastic but it is dust that has compacted over time
I took it all apart and back together with minimal issues. But now it is stuck in max. So battery doesn't last long enough to do the house like it used to. I took it apart and don't see any issues. But I also do not see anything that the slider would move or what actually makes it change settings. I am wondering if there is a missing part? Any suggestions
you didnt assemble the power slide correctly. it is currently on max. you need to take it apart and put it back together again
Awesome tutorial and very welcome. I bought this Dyson second hand, but it was very nasty, although the seller told me that it was hygenically cleaned. I'll let him know that if he has something cleaned, he shouldn't empty the sewage with it afterwards. Did you find a way to remove the inner connector? I'd like to also take that one out, as the part where it is in is as nasty as the rest of the vacuum.
if you watch my newer video it shows you how to remove it. it is normal for people to think it has been clean properly. until you watch my video may people would think it is clean as it is hard to disassemble
@@OpenMeUpTec In this case it was nothing about people not knowing, but deliberately lying about the condition of the vacuum. 😞 I'll search for the newer video, thanks.
@@MischaGielen i have seen this many times before. they genuinely believe it is clean. until you show them otherwise
Thank you ❤
Amazing!
thank you so much buddy you helped me out BIGTIME!! i owe you
thanks for your support
Where can I buy the assembly/parts @ 28:43? Cant seem to find them on the dyson website
you cant buy that part you have to buy the whole unit show at 11:50
@@OpenMeUpTec that explains why I'm having such a hard time finding it or a name for it. Thanks mate
19:40 wrong disassembly socket connector.
is other solution from another side disconnect without broken parts
Once I removed the push up bras and edible panties from the dust bin the vacuum worked just fine...problem solved.
I'm finding that carelessly discarded panties are somehow finding there way into the main filter as well, this has prompted a new dust filter inspection and cleaning protocol which will be implemented whenever the filter light is activated.
@@TrojanRabbit-sg9bl Spot on Chris.
Hi there, the trigger connector (white clip attaching trigger to powerboard) do you have any idea what that would be called to replace it? Please and thanks!
i dont know what it is called. but i cant see how you can buy it even if you knew as it is not normal for that to break at all. therefore no one will be selling one
@@OpenMeUpTec the white clip on my V10 trigger had no mating connector on the circuit board. It appeared to have been glued to the board as once I pushed it aside (in the direction of the 2 wires) there was nothing on the PCB to reconnect it to, just 2 solder pads. I had to cut off the white clip and solder the 2 wires directly to the pads on the board. To make this easier I extended the 2 wires slightly and put heatshrink over the joins.
In my case the red trigger plastic was not broken but after pulling the trigger assembly out, a short plastic cylinder fell out and that was what had stopped the trigger from operating, the trigger was staying in and permanently ON. The broken plastic was the receptacle for the torx screw up inside the handle that is removed after the battery is removed. I didn't bother trying to glue the broken piece back so that screw is no longer fitted
see my response to @OpenMeUpTec reply
@@ewenfraser883 the plastic piece is the issue that many people have. since the screw doesnt hold the trigger in. the trigger slowly slides down which put the vacuum in the ON position. you can just push your battery back in so it will remove the pressure but slowly it will slide down again.
My dyson v10 has 1 red 1 black wire connected to circuit board. Any idea how to get this off. ~40:25
thin or thick wire. there is a thin one which is the trigger button and the thick one is the battery power
The white clip on my V10 trigger had no mating connector on the circuit board. It appeared to have been glued to the board as once I pushed it aside (in the direction of the red and black wires) there was nothing on the PCB to reconnect it to, just 2 solder pads. I had to cut off the white clip and solder the 2 wires directly to the pads on the board. To make this easier I extended the 2 wires slightly and put heatshrink over the joins.
After disconnected the white clip. I forget how to connect the thin red and black to the circuit broad. Can I have the picture of it?
DAYSON COMPLETAMENTE INCAPACI MA PARLANO INGLESE!
Dayson aspirapolvere senza fili che si rompe facilmente:
I progettisti Dayson sono dei DEMENTI, se monti l'elettronica a bordo motore per di più saldata rigidamente tramite i contatti dello stesso motore, portando di conseguenza tutte le vibrazioni e le risonanze del motore che ruota a 110.000 Rmp sull'elettronica, è normale che prima o poi si scassa, lo capisce anche un bambino, di fatti è il guasto più comune in pochi anni di vita.
Con quello che costa questo aspirapolvere mi aspettavo un risultato almeno decente. Mi pare che più che aspirare polvere sia stata progettato solo per ASPIRARE SOLDI ai malcapitati che la comprano, di fatti è Britannica gli stessi che hanno fatto i vaccini insieme agli USA che fanno la Tesla!
I am having dell Inspiron one 2020 currently using Pentium g620t suggest me a cpu
on every video you say to watch the other video on how to remove the connector........... just show here ffs
i did show it here but it might not be as clear as the other one which was made just to show you how to remove the connector
@@OpenMeUpTec ignore me. I was grumpy that I couldn't find how to do it. Sorry
This is crazy. We have to do this for customers recently with Dyson and shark because or their questionable design, all of the dust get trapped in the centre (unreachable) bit. Terrible terrible design. I charge customers £70 for this service since it takes about an hour if not longer. Just to clean your hoover so it actually sucks again! Dyson you absolute dick heads! Iphones are easier to repair than these. At least you can replace the motor on its own in these versions. The old design had the motor moulded into the handle so your have to replace the whole handle, plastic, trigger and motor. The world would be a less wasteful place if Dyson just left the industry.
cleaning it or not doesnt really change anything it will still work basically the same. dyson already gurantee that it doesnt lose suction. cleaning it really only removes the smell. for most people they never clean the unit and just bin it when it dies. you only need to clean it for 2 things really 1. it smells 2. you got something stuck inside
@@OpenMeUpTec Not true. It definitely resolved the issue if you take it all apart and clean it properly. It is bad design because you should see the clay which falls out and stuck in there. If I could attach a photo, I would. I would argue that is something stuck in there. When the micro dust build up to the point where it becomes clay then yes, this will mimic a block due to poor design.
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.
I am having dell Inspiron one 2020 currently using Pentium g620t suggest me a cpu
Core
i5-3470T
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.