Micro Omnibus F3 Betaflight+OSD Flight Controller
Вставка
- Опубліковано 22 вер 2024
- A new 20x20 micro flight controller that is similar to the popular Piko BLX but this has an OSD chip and runs the Omnibus Betaflight firmware. I'll be putting this into a Chaser88 rebuild so look for that video soon!
Check it out here - goo.gl/sFNebI
Assorted M2.5 screws and spacers - goo.gl/TrMbGb
▼ RC Gear
Turnigy Evolution - goo.gl/xp5AGq
FrSky Taranis X9D Plus - goo.gl/W6VNL3
Fatshark Dominator V3 Goggles - goo.gl/ixDi1w
▼ Camera Gear
Sony RX100 Mark V - goo.gl/yaQvft
GoPro Hero Session 5 - goo.gl/4PA6Bn
Hawkeye Firefly 7S - goo.gl/v2NGCQ
RunCam2 - goo.gl/QS3pzu
Xiaomi Yi Action Camera - goo.gl/u30TkK
Mobius Mini - goo.gl/L2oNNu
Samsung Galaxy Note 5 - goo.gl/1uOSFg
▼ My Video Drones
DJI Mavic Pro - goo.gl/ecxdZQ
Yuneec Breeze 4K Selfie Drone - goo.gl/3YhDwY
Hubsan H109S X4 Pro - goo.gl/FL4jss
What I use to edit my videos - amzn.to/1VJHWp7
SUBSCRIBE TO MY CHANNEL - goo.gl/b1cZZM
I always file the holes larger anyway because I want to damp vibrations better (this way only the foam under/over the holes touches the FC, the screws can vibrate as much as they want and not transmit the vibrations to the FC because they don't touch it)
I have a couple on the way. It'll be cool when they come in 16x16
i had this problem as well...wish i'd known it was M2.5..but i was able to use a rubber washer to tighten them down. great vid
You can carefully drill the holes to M3 size. I have done it on two if these so far without issue.
yeah just did mine :)
I don't understand one thing. Nowadays on the market there are plenty of 4in1 ESCs in 20x20 mounting pattern, so why they can't just get rid of this useless PDB in the FC and simply make it an FC + OSD, but -PDB? It will not only allow to fit more components without worrying about space on the board and these compromises like 2.5mm mounting holes, but also allow the board to be physically lighter and thinner because of PDB traces removal, and also get rid of currents, flowing nearby the FC. And with usage of 4in1 ESC and some kind of innova type 20x20 VTX, it will also significantly lower the stack and allow for neat and tidy builds.
+Crafffter We will see this later this year.
nice.. this would probably go well with the cs110 frame i ordered. looking forward to the wiring vid cuz I'll probably need it. lol
+James K I just did a chaser 88 mod video that will be out in a few days. You'll need M2.5 mounting hardware.
cool. yeah, i have extra spacers and screws laying around.
I have 2 of these boards and I've had major issues with both of them. One of them does not communicate with motor 2 so is completely useless. The other board had the BEC fail and it started outputting 10v+ to all the 5v pads. So it fried my receiver. I only had the receiver and buzzer connected when this happened so I don't know if the BEC can only handle very low current or if it failed for another reason. Either way I would avoid these boards if I where you. I think it's the only 20x20 board that offers betaflight OSD at the moment, which is why I got them but I'm sure we will see more options pop up in coming months. I'm going to try running the board off of a 5v reg so I can power all the other components I need to from my board and see how it goes. As of yet I have not been able to get one of these boards in the air because of all the issues. Good luck if you purchased one of these. I will not be buying another one I can tell you that.
Do you have any FlySky receivers that you can confirm will work with this board? Thanks!
See this video - ua-cam.com/video/7HiK7ZjjdF4/v-deo.html
Max Amps this FC can handle? PikoBLX can only handle up to 50amps.
+Jonathan Edradan Its probably about the same. These arent meant for 4S large builds.
"What are the pins outs next to the micro USB for on this board?? AIO escs stack connection? So many FCs... so many AIO... wrecks my head sometimes : / What is a good alternative to this FC now??
Wouldn't you be able to file the mounting holes to 3mm?
+Ryan McKay I've heard this is possible, but kinda risky
Is it possible to add frsky telemetry to this board? I don't see any possible pins
nice, please when are you going to review the eachine mini cube flight controller that you did the unboxing.
Yes, it should be going into a build soon. Sorry, I've got a ton of things to review.
Albert Kim is all good and be well
I got one of these- Are you able to replace the flycolor raptor fc and wire it to the flycolor esc 4 in 1 with this? The pin connection between them is confusing me. My klex90 fc is going out dumps the firmware between flying sessions- wierd
Hey Albert thx for the heart! But yes or no do you know if you can you interchange these 2 fc's? Thank you!
Hello Mr. Kim,
I have 2 micro frames and need to get an FC for them both, 120 size frames. I already have spyder 18 amp escs so do not want or need a FC stack with escs, can you please give me a good 20x20m FC for my two frames? I am having a hard time finding anything that does not include ESC stack etc. I had a Piko BLX but seems I am unable to connect in to betaflight after fireware flashing, think F3 boards need a different driver, any ways never got it to work once, so lookin for an alternative FC in 20mx20m size. Thanks in advnace!!!
hey i flashed the wrong betaflight now i just get a solid blue light there is no boot pins any help???
It's on the bottom of the board near one of the corners. Two solder pads that aren't bridged and not labelled with anything.
Hi, this flight controller is good for osd and 100mm drone and 10esc?
Hi Albert. I appreciate you giving us an idea where the boot pins are because Banggood gives us no info what so ever. Can you please be more specific? I don't want to fry my new board by picking the wrong pins. Thanks VERY MUCH. You are the only one giving ANY info on this board. :) You can send a picture of the correct pins to 10sr@gmx.com
where are the boot pins on this little board please ?
Can this take 4s? On the banggood description it says 3s but an answered question says 4s.
+Elefkara I don't think it can.
Does anyone know if this is compatible with iNav? I'd love to use it in a smaller race wing.
I wanted to use this FC on the Realacc KT100 100mm - goo.gl/t0UqDd. Could I build this if I bought the m2.5 screws
Yeah, it should work with the right mounting hardware.
Please respond :) Love your videos. I bought the super-s f3 stack. This is my first micro and I'm wondering if it's normal not to get motor beeps for power or signal. Using dys 10,000 KV?
I can't get the motors to spin in BF. esc's and FC seem fine, so I was going to build it before I try to arm. Didn't want to bother if the motors/escs aren't working. Thx!!!!!!
Thanks for the question. Sorry, but I don't have enough information here to offer a solution. I don't really know what's going on based on this limited about of information.
Albert love the channel. i messed up my OMNIBUS Betaflight 3.1 F3 6DOF Mini Flight Controller could you send me the dump file
Can this fc handle vtx power? Power filter? Thanks
+jwhit87 for the small micro aio FPV cameras it's fine. Power is filtered on the 5v rail.
Albert Kim i wonder if eachine vtx 03 would work at 200mw
+ChristianP1973 just flew it on 25mW with no issues. Will try the TX02 on 200mW later.
+jwhit87 I think it will. I'll test the VTX03 later.
Albert Kim that would be a great video plus it would show any video noise and how to setup osd if all possible
anyone having trouble with frsky receiver on this? mine would connect to my TX but on betaflight it wont do anything no matter what i do on the port tab.
zero3four6 Did you ever figure it out for the frsky receiver I have xm hooked to it and tried every uart receiver still isn't showing anything on betaflight?
Jordan Harris no, i gave up on them lol
ports tab set uart 3 serial then go back to configure tab and choose serial and sbus- if you don't tell the board how to communicate it won't save the configure page settings and you won't know it- and it won't work
this vs piko blx?
This one has OSD and is DSHOT capable without hardware mods. The Piko has a 3A BEC and DSM port.
Can you file the holes out to 3mm without damage? Out of stock at BG
I've heard of some people who did this but be careful!
I drilled mine to M3... Ome issue I have with mine is, it wont power up my VTX
Guerrilla Drone did you ever sort out you power to the vtx
yes I did, my vtx power wires were backwards, red on black on red...