Suspension Springs Make Me Nervous | Mercedes S210
Вставка
- Опубліковано 25 лип 2023
- Replacing the front suspension coil springs on a Mercedes Benze S210 using a Klann style spring compressor
If you want to support the channel (and get some perks, ie early access to videos, behind the scenes pictures etc, here's a link;
/ involvod
Merch' can be found here;
www.etsy.com/shop/involvod/ - Авто та транспорт
Thank God you have a Mercedes on this channel. It makes the channel even better.
Gripping episode, like a Saturday morning matinee. Will he survive, will his head be knocked off. Tune in next week folks.
That opening pan shot showing the Volvo grill on the Merc made me spit my tea out.. very funny.
Never apologise for the bells! They are part and parcel of your videos. Keep it up! Cheers
Lmao at the grille on the Merc 🤣🤣🤣 my nan’s C3 went through front springs like you wouldn’t believe. You did a great job fella, there is something very scary about a compressed coil spring like nothing else. I felt so nervous for you.
Known as Widow Makers. The earlier W123 had a bend in them like Robin Hoods bow whilst under normal suspension compression. Terrifying compressing them enough with even the proper tools. Felt like I needed one of those robots that disarm bombs to do the job.
😂That front grill is killing me😂
Great work video, springs are just pure evil 😈, nicely done 🤗
Exactly this tensioner once brought me to the hospital. Luckily my left hand survived. But I never would do this work by myself again. :D
I watched this whilst cowering behind the sofa with my fingers in my ears , and my bottom suitably clenched 😮
Those cheap spring tools are ok, if you use them properly. You have to unbolt the bottom mounting of the shock from the beginning and also you have to put piece of wood between fender and rotor, it helps not to push up knuckle and gives you enough ability to compress the spring properly.
not gonna lie I am here to watch mostly Mercedes contents haha
Impact on a spring compressor is terrifying. Especially the outside clamp style...when/if they shift you see your life flash before your eyes
I've heard not to use an impact, it is too strong and can lead you to accidentally tighten the spring compresors unevenly. What do you think?
Nicely done. The hubcap face shield had me laughing. I've heard a little grease on the threads of the compressor makes it a lot easier to compress the springs, not that you appeared to have much issue.
Thanks 🙂
Surely the grease on the threads is required by the spring compressor instructions? Just wondering since I could imagine damage happening to the spring compressor if the threads are not lubricated. Maybe that's only a worry if they are used many times over their lifespan. Not really the same thing but an Air Alaska airplane crashed since they hadn't been lubricating the "jackscrew" controlling the elevators of the plane and it caused the threads to break loose.
Those W210s are fun, when they rust badly enough the front spring cups rip out of the frame!
Also a feature on the W202 C-class I think.
"This is not a how to, i dont know what im doing"
whenever someone younger than me asks for my advice lol
Done many a spring now but i was exactly the same as you when i first did a spring....proper crapping myself!
The more you do the easier you feel about it,,,just don't get complacent with them, still got to treat them with respect!
Agreed!
Don't forget to do the safety squint! At least you found a quality tool for the job. I wanted to use the same style compressor when I changed the springs on my Amazon, but it doesn't have an access hole below in the rear. Tried some old school "single hook" compressors first, but got a bit too uncomfortable as they can easily slide off. Found a compromise with some double hook style compressors that has less chance of sliding off, with an additional safety lock.
Which model did you use? Thanks! I am debating if it's better for me to give the parts I have to a mechanic for them to use their professional grade spring compressor and assemble it for me. The fact that super expensive professional spring compressing tools exist makes me nervous, since why would those need to exist if the manual cheap ones we can use are safe enough?
Lol I loved seeing the Volvo 240 grille over the Mercedes hahahaha
Yo he hecho esa operación en mi Volvo XC90 y no lo vuelvo a hacer más. He visto el vídeo con una tensión....jajajaja
Great work. i had the same issue when I replaced the fronts spring with my previous S203. It was a job that put me off owing a Mercedes again.
Ooof, yes some days I feel like that too 😅
Ha Ha Ha, Gotta love your own customised w210 sled with real Swedish heavy duty pvc grille🤘
You should have a nice stance with new coils up front, happy Autofahren mate.
Thanks 😄
Nice grill ! Nice tyres! Nice spring compressor ! Sadly not enough crusty merc gold! 😂😂😂! But well done with this tricky job! On this wanabe 240😜
Thanks 👍
Jeebus, I thought the 225€ Biltema spring compressor was a bit expensive! I should probably get a Klann style compressor though, my current set of two compressors made of a connector nut and a spacer with welded hooks stacked on a long M12 bolt is beyond sketchy.
I would expect the old springs to be a bit shorter as they can sag over the years.
I think that you are trying to give me a heart attack Sledge! No breaks and maybe dead, now potentially exploding springs! Ms Involvo'd would not be happy if you came home with your head in a carrier bag!
Hahaha 😂
Thank you! Love your videos! I'm surprised you've got time for them with a newborn :)
Thanks! It's not easy but I'm taking every opportunity 😄
Those Mercedes front springs are just ridiculous 😂 Shouldn’t be a problem with that quality tool you got, though. I’ve also struggled with the positioning of spring compressor so many times, and not only with Mercedes… Make sure those spring top mounts are good… As you probably already know, they do tend to rust completely off the chassis…
Thanks, it was so frustrating having to keep starting over 😅 I had a good check of the perches and they are solid, looks like someone replaced them already and put down a ton of good weld
Well, I made it through yet another 'Fix my Mercedes' video! 😵💫🥴 lol
I know someone who was changing the springs on his race car when the compressor broke…fortunately it didn’t kill him as it was a glancing blow that pealed back the skin on his forehead…You have every right to feel nervous
Nasty aren't they
Better be save than sorry with these springs... the one time i did them on my Borgward I almost had a cross member in my face - and they didnt even look compressed in the first place
It's crazy isn't it!! I think in future for the coil over strut type on the Volvos I'll just take the strut to a garage and let them swap the springs instead 😅
Scary af, mate. Good job!
Put the Volvo grille on with tyraps 😎 or is that kind of customizing illegal in Germany 🤔🧐 Great Video!!
Probably! 😅 Thanks 👍
I had a very bad experiance with a Citroen C3 at college when removing springs so yeah... just be glad you ended up with an old merc and not a modern French car😂
Ah damn. I once saw a guy get hit by a spring, it was in a Jaguar with a similar set up to this, he didn't use a tool just loosened some suspension arms to remove it but it jumped out of the car and floored him, he was okay just a bit dazed!
I have three different spring compressors, but not one like that! Seems to have done the trick for you. Nice not to have the strut in the way. Cheers!
Thanks, I'll end up like that too as this one won't help on the Volvos
👍👊
Never seen that type of spring compressor before. Looks even sketchier than the usual diy ones! Would the control arm drop down further if you unbolted the damper?
Yes definitely 👍
lmao, if the volvos abs doesnt kill you the volvo hub PPE gear will
Being totally mechanically incompetent I wouldn't wish to risk almost certian personal injury 🤕
No car like volvo 😂
That was stressful to watch…..much less do