Thank you so much for posting this simple little fix. I feel like a weight has been lifted knowing this is something I can fix myself. Thank you very much sir.
I paid about $300 a year ago to get both solenoids replaced on my son's 2013 Malibu with the 2.5L engine. After watching your video, I'm sure I could have replaced them myself. Thank you for your clear video instructions.
My 2015 Malibu is throwing this code. It runs ok when first started and at higher speed, but after driving for like 15 minutes when you slow down it bucks and coughs sometimes stalling. Could this be what is wrong. What are the normal observed symptoms of a vehicle with a bad VCT solenoid.
I'm getting codes P0010 and P0010P. I measured my existing intake VVT solenoid and got a reading of 14.1 ohms, just above the range of 4-12 ohms mentioned in the video but not in the megaohm range like the bad one in the video. Is a reading of 14.1 ohms high enough to indicate that the intake VVT needs to be replaced? I've also seen other UA-cam videos that suggest cleaning the screens and internal portion behind the screens with CCR Mass Airflow Sensor first before buying new solenoids.
If its that close to specs it should be ok...yea, if electronically it checks out ok then u would wanna try cleaning em to see if it helps it out mechanically
Too funny The car I'm working on is a silver 2014 Chevy Malibu it's my mother's and it is the exact one that you have in this video same color same interior everything except my mother's is a lot cleaner no offense 😃
Where do you get the connectors I've talked to AutoZone and advance Auto and neither of them even has a listing for the connectors for the 2014 Chevy Malibu with the 2.5 LS
Oh s*** oh s*** oh s*** I touched mine together. I crossed the f****** streams. What does it mean? I touched him. Is my car going to blow up what I do help?
I mean u dont have to but to be safe in case u drop a tool somewhere it should touch..u can disconnect the negative terminal..the benefit it will also reset the code
I hv a 2013 tht we bought new and iv had to change them twice in till today this will make the 3rd pair.Yes it will cause the car to jerk and cut off at a complete stop.
![2013-2016 Chevy Malibu P0011 Code Repair [Save Big $$$]](http://i.ytimg.com/vi/saDg8P9pu34/mqdefault.jpg)
Thank you so much for posting this simple little fix. I feel like a weight has been lifted knowing this is something I can fix myself. Thank you very much sir.
I paid about $300 a year ago to get both solenoids replaced on my son's 2013 Malibu with the 2.5L engine. After watching your video, I'm sure I could have replaced them myself. Thank you for your clear video instructions.
Thank you🙂 yea it would of been a good amount of money to save
Have he had any more problems with it
Doing this same job today 4/23/21 on my wife's 2014 Malibu. Thanks for the simple but very informative video.
Thank you🙂 hopefully everything goes well
@@backyardchevy328 🤞
My man even included links to the part. Lifesaver.
Thank you🙂
Thank you so much! I feel that I can fix this with ease. and before I didn't know what in the world it was!
Great job on the video. Very clear and precise. Thank you
This video helped! Thanks for the links brought the part and had my mechanic fix it
I need this part done to my 2015 Malibu LS 2.5 engine it looks easy to do
Thanks for posting this video. Great explanation and video shots. Subscribed and I'll be checking out more if your videos.
Very good explanation
Will changing the VVT help with the start and stop
Sometimes it will auto stop but will not start back up.
Awesome, excellent video...thanks!!!
My 2015 Malibu is throwing this code. It runs ok when first started and at higher speed, but after driving for like 15 minutes when you slow down it bucks and coughs sometimes stalling. Could this be what is wrong. What are the normal observed symptoms of a vehicle with a bad VCT solenoid.
I checked the ohms and my old one was 11.55 and the new one was 6.54.
I'm having trouble taking off the connector any tips?
No reply wow same damn boat
Great video!
Thank you🙂
My new one ohmed out at 6.0 is that good?
So what makes the vehicle throw this code?
I'm getting codes P0010 and P0010P. I measured my existing intake VVT solenoid and got a reading of 14.1 ohms, just above the range of 4-12 ohms mentioned in the video but not in the megaohm range like the bad one in the video. Is a reading of 14.1 ohms high enough to indicate that the intake VVT needs to be replaced? I've also seen other UA-cam videos that suggest cleaning the screens and internal portion behind the screens with CCR Mass Airflow Sensor first before buying new solenoids.
If its that close to specs it should be ok...yea, if electronically it checks out ok then u would wanna try cleaning em to see if it helps it out mechanically
Can I do this in my Chevy Malibu 2016?
I got the replace “variable camshaft timing solenoid” would appreciate if you reply :) thank-you.
Yes, do u have the same 2.0t engine?
I have an LS 1.5L and it’s different
@@tipsytoucan981 did you you replace it?
❤❤❤❤❤❤❤❤
If this parts fail, the car won't start? Mine won't start I'd replace starter and both batteries already, somebody please help!!
Too funny The car I'm working on is a silver 2014 Chevy Malibu it's my mother's and it is the exact one that you have in this video same color same interior everything except my mother's is a lot cleaner no offense 😃
Can the connectors be replaced?
Yes, u can slide out the wires individually and slide em into a new connector so u dont have to cut the wires..i should make a video on that
@@backyardchevy328 thanks I replaced them yesterday and the clip on the inside broke, it still connected and runs great but I’m worried it will slip.
@@frankflores6247 yea i know what u mean, any vibration can cause it to disconnect and u wouldnt want that
Where do you get the connectors I've talked to AutoZone and advance Auto and neither of them even has a listing for the connectors for the 2014 Chevy Malibu with the 2.5 LS
@@mikewiley1652 junkyard or ebay is your best bet
Jeep
Oh s*** oh s*** oh s*** I touched mine together. I crossed the f****** streams. What does it mean? I touched him. Is my car going to blow up what I do help?
Hey do I need to unplug battery for this
I mean u dont have to but to be safe in case u drop a tool somewhere it should touch..u can disconnect the negative terminal..the benefit it will also reset the code
Well this make your car cut off cause mines keep cutting off
Mine is jerking at red light after i changed my solenoids.
I hv a 2013 tht we bought new and iv had to change them twice in till today this will make the 3rd pair.Yes it will cause the car to jerk and cut off at a complete stop.
Sounds like you hv some bad parts