Fuel Pump & Fuel Filter Replacement Chevrolet Cavalier 1995-2005
Вставка
- Опубліковано 5 вер 2024
- In this video we show have to replace a failed fuel pump and plugged fuel filter in a Chevrolet Cavalier 1995-2005.
If you have any further interest please visit www.2carpros.com
*Disclaimer: Please use all safety precautions
One of the best auto repair videos I've seen. It's nice to see someone actually clean things properly!!!
Wow, thanks!
No joke, you guys are the absolute best mechanic tutorial guys out there. You start right away, you do things right, and you keep things moving
I'm doing 2003 model today. hope I can get it done. in a drive way with basic hand tools
You got this! Thanks for watching!
What socket wrench you use to remove the fuel pump on a 1998 Chevy cavalier?
About to embark on this journey... wish me luck!!!
You got this Joe! Thanks for watching!
How did it go. Anything you wish you knew then that you know now
It's a shame that what seems to be about 90% of the time no one ever responds to anything @@jamiebrewer1877
After replacing a fuel pump, why would there be a high pitch sound when inside my car? It goes away when i turn my AC on, but the sound comes back after a brief second. (Replaced by an auto shop, and they replaced the filter and did a fuel system clean.)
I love you guys. I've been sending questions to your free tech support which is sooo helpful and this is a good, explanatory video.
We love you! Thanks for watching!
on my 2004 chevrolet cavalier do i have to put the wiring harness on my new fuel sending unit like you did on yours cause my new unit is square help out thanks.
Looks like I might have to do this. Cuz OBD2 scanners don't know what they're talking about and neither do mechanics. The dtc code is p0340 faulty camshaft position sensor which supposably shut off fuel pump and spark. But I replaced the camshaft position sensor and still won't start. When my car failed to start p0340 was the code and no buzzing sound from the fuel pump. SO therefore bad fuel pump. Which means p0340 for a 01 cavalier is a bad fuel pump not a bad camshaft position sensor or crankshaft position sensor. Engine won't start. I did try to add fuel additive in it did start but shut off immediately and hasn't started ever since then. And I replace the alternator the starter and the battery as well as the spark plugs. But still car won't start. It's obvious it's a bad fuel pump. I don't have access to that lift you have In the video so changing out the fuel pump and dropping the fuel tank is gonna be a challenge with just a jack and Jack stand.
I have replaced my fuel pump twice already and everytime I have to fuel pump runs for about a month and then it stops.Do you know of any possible reasons that the pump is not going through
did you replace the relay as well? It could be causing high resistance which causes premature failure of the pump.
Awesome video wish all video explantions can be like this. ...any other unshown small things on this video is just just common sence.
Is this for an LS 2.4L as well?
tnx 4 excellent vid ! 🔧🔩🔨👍📚😀
Thanks for watching!
Did you have to take out the gas tank? And how long min wise did it take you from start to finish to replace the fuel pump?
I just saw the videos so forget about my 1st question. But how long did it end up taking you?
A few hours or so. Not bad. Thanks for watching!
so I just go ahead and put the fuel pump in place even if there is no place for the strainer then?
Yes, the strainer is in there you just cant see it
+2CarPros OK thanks
Thank you buddy! Great help! 👍
No problem 👍
اذا ممكن اريد مقطع فديو عن السيارة ساسوكي فرونزا 2006 فتح قاعدة فيت بام
I just finished installing the pump the find out my fuel filter doesn’t fit the new pump. Is it not the same size connector and if not can someone direct me to one that’ll fit my 2000 Chevy cavalier
Check out Amazon, they have a pretty good parts fitter tool. Thanks for watching!
2CarPros thanks for the reply. I actually just finished and the car is running thanks to you!
Awesome! Nice work!
did this exactly the way you did it except my tank was almost full of gas. Now car starts! BUT.. gas gauge reads full when you first start the car then about 30 seconds later drops to E??? please need to figure this out help would be much appreciated. thanks!
It didn't do that before? I'm thinking it may be a defective unit. So the pump works which is great! But the unit that sends a signal to the gauge may be defective. It does happen.
Ok thanks!
2CarPros no b4 I changed the fuel pump and it was working the gas gauge was fine
im jamming out to this like doug funny!
Your video is not helpful. You did not show removal of the heat shield or what holds the tank in place once the straps are removed. I have watched your clip twice and it looks like this gas tank was removed previously and reinstalled so you can make the removal simpler on the video.
Mark Dressler also doesn’t explain the wire crimping bs that he’s doing
im glad it shows what it does because theres not to many vids out there on this . i gotta to take my tank down
Crimp connectors? Seriously? On top of the fuel tank...wow.
Yep. Thanks for watching!
@@2carpros NO heat no heat shrink tubing ????
Those are heat shrink connections oh well. They forgot or did not know. Still decent video. Thanks guys.
Not sure what vehicle this is showing but my 2004 cavalier Base model 2.2 ecotech is NOTHING like this video shows.
Very Good Video
No pos guau yono me animo acambiarla👏👏
I have EFG0085 fuel pump but it has no place for a strainer
The strainer on some replacements are inside of thefuel pump module.
what about the fuel strainer?
Yes the strainer should be replaced, it attaches onto the bottom of the pump.
Hello!
I need some help with chevy 2.2, 2002, opturator and its hoses!
Great video. Nice and simple will this work on a 2003 cavalier?
Also my tank is full of fuel when my pump went. I know it doesn't hold much fuel. Can a guy support it with a jack and lower it slowly to get the tank out and drain fuel out the tank while its out into a gas can?
+Steve Dvernichuk Using a floor jack can help you lower the full tank just make sure it doesn't slide of the jack. Yes it will work for your 2003. Please subscribe!
Great job, fellow-Americans! Liked and Subscribed with the bell activated for more videos from you! Thank you! Thank you!
Awesome! Thank you!
Ok. So the first step is to remove the rear seat and cut a hole to get to the top of the fuel tank....
Could you imagine the complaining if I told people that is how it's done? Then people would cut into the fuel line a spark ignites the fumes and now you have a huge problem. I have to go be the book. Thanks for watching!
@@2carpros yeah.. the term "exceptionally non brilliant" springs to mind.... I was in fact being sarcastic.
How would you get to the fuel line clamp to reroute the new lines??
They wanted 648$ to do this job. I think I can do it myself.
The price is insane. I ain’t got a bmw!
You got this! Thanks for watching!
It would be great if we had a hoist as well
A jack and stands will work as well. Thanks for watching!
2CarPros Do you happen to know if extreme cold weather would affect the the fuel filter?
Why do people use brain dead music on any video when it's not needed
It is free to use. People complained when there wasn't music. Thanks for watching!
@@2carpros I like the music!