Thanks for the video. Im doing a 14 yukon denali awd. As i leave this comment and did a 13 silverado rwd already. Keep up the good work and dont let negative comments get you down. Thats just how some people are.
Never pull the pan without replacing the oil pressure relief that is just above the oil filter, screwed into the pan itself (easily seen at 35:11 of the video) . IF the pump was replaced because of suspected oil pressure issues, chances are a new oil pump will NOT fix the problem. This oil pressure relief I mentioned is probably the issue - the spring weakens over time. Also, NEVER install the crank pulley with the front cover tight. Doing so can easily cause a misalignment with the crank oil seal in the front cover. Front cover should be tightened AFTER pulley is installed (or use a special tool for this). This will surely leak in a few thousand miles. Other than those things - this is really the proper way to replace the oil pump. The pick up tube o-ring and it's seating in the pump is the most important part. For a DIY, it's extremely difficult to get this properly installed without dropping the pan.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks for the video. Im doing a 14 yukon denali awd. As i leave this comment and did a 13 silverado rwd already. Keep up the good work and dont let negative comments get you down. Thats just how some people are.
You guys are awesome for uploading these... Thank You!!👍👍
Book calls
4 19 to 22 hours kids these guys are professional do try it yourself if you aint mechanically inclined 😊
Never pull the pan without replacing the oil pressure relief that is just above the oil filter, screwed into the pan itself (easily seen at 35:11 of the video) . IF the pump was replaced because of suspected oil pressure issues, chances are a new oil pump will NOT fix the problem. This oil pressure relief I mentioned is probably the issue - the spring weakens over time. Also, NEVER install the crank pulley with the front cover tight. Doing so can easily cause a misalignment with the crank oil seal in the front cover. Front cover should be tightened AFTER pulley is installed (or use a special tool for this). This will surely leak in a few thousand miles. Other than those things - this is really the proper way to replace the oil pump. The pick up tube o-ring and it's seating in the pump is the most important part. For a DIY, it's extremely difficult to get this properly installed without dropping the pan.
Need more videos of the 4wd variances. Not everyone is lucky enough to be working on a 2wd and I see most of the videos lean for 2wd more so thab 4wd.
thank you for the video the thing I notice on my top camshaft sprocket doesn't have a timing mark
Awesome video Thanks 😁☕👍
How do you know if you need to change the timing chain?
Aren’t you the same guy that was with A1 auto parts?
I'm looking for the part number of the "Cam Bolt". Does know the GM part number?
The thermostat need to come out too while you at it😮😂😂 good job tho bro ,keep it up( heater hose😂😂)
15 mins into video I’m like I thought that we were just replacing the timing chain???
IS THIS THE SAME PROCESS FOR A 2015 CHEVY TAHOE? THANKS
Greetings, excellent work, could you help me with the tightening torques, or where I could get them, thanks in advance
Good job, 👍
how many miles a timing chain which has 80 links can last if a Pontiac Aztek truck has been replaced oil regularly? Thank you so much!
About how many hours should a shop take to complete a job like this?
Doest the timing marks have to be at 12 o clock position on #1 compression stroke?
Do you loose oil when taking the differential out!? Mine making noise after re assembly! Thanks
Is there no Oil pump gasket to block gasket?
Do you have to use same dampener on chain w 3 bolt cam swap..can you use the ls6 black one...thx
thanks
No need to replace the two rivets you drilled out at 35:38?
Hello my truck cranks but will start but sometimes it won’t and is sluggish sometimes i here no slap but could this be issue?
Could you tag me in a video of changing the timing chain on a 07 impala lt 3.9 L
title isn't accurate 2011 on uses vvt whole different experience butch
Have to do this job at work very soon. Not looking forward to it.
What is the size of the engine?
Mine don’t line up. How do correct it?
for vvt version?
What type of puller is that called ?
+curtis brunner Specialty Tools
Bearing Puller
Belt Wrench
Engine Hoist
Harmonic Balancer Installer
Harmonic Balancer Puller
Stretch Belt Tool
Trim Tool Set
Taking every damn thing off
Mine is stuck
This is not necessary why did you take the whole truck apart?
+Travis McPherson We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
This is ridiculous.. lol is this a video
Of timing chain swap or a whole rebuild
Of the front end? Lmao good lord
I would just replace the chain only.
To much wrk for a do it urselfer...shop is gonna cost u big...
Probably would have been easier to just pull the whole Engine 😂