Guys please make sure to wear a organic vapor face mask while using the stuff it can cause brain damage! Please make sure you had the correct filters when using the stuff is very dangerous!
I used it for my sink before watching this I did it too thick and have runs is this product able to be sanded to remove runs and then put a coat on top after sanded and cleaned ?
Hi your video. Doing the tub was very informative. For me, 1st should be how you cleaned the tub 3 times, sanding then the 3 times alcohol and brillow thing.. So I'm important.
So my kitchen is a older style sink, cast iron ( and green ) I was wanting to give it a more updated look ( white ) I did the appliance epoxy, but that didn’t work. Several weeks later and it has scuff marks and peals. I was thinking about getting paint thinner and starting over with homax tough as tile. How is this product against hot water? And pots and pans ? What do you think? Any suggestions? Ty sir
Thanks for watching. Im not sure about sinks i have only used in tubs and showers before. I have used the spray epoxy and it does peel on sinks i havent tried this roll on stuff on a sink yet . If it were me i would give it a try i think the prep is key to it sticking not peeling
you say 3 or 4 coat , does it mean I have to use 3 or 4 fresh box of thse product , when I mix two part how long it will can be use when lit was covered or these is Like opoxy hen mix two part havve to use and no storage option for second or third coat using agin left over epoxy or paint what ever was call .
I’m about to use the spray can version on my kitchen sink. It says to let it cure for a 48 hours. Do you think I should let it cure longer? Also is my N95 respirator good enough?
@@BryanBuilt Sick I'm subscribed, I'm Jesse the owner of Tulsa Hills Renovations in Tulsa. How does that tub kit hold up after time? I'm looking into doing a tub this weekend
@@tulsahillsrenovations4506 nice! Thanks for watching. I have used it 2 times once in this video which was a flip so i cant really tell and one other time on my downstairs bathroom . I think we had it for like 2 years and didnt have issues with it . But it was a standing shower so we just painted the walls on that one . Not sure about the tub
That stuff is strong speacily the one that comes in a quarts half gallon dammn i got so high with in like five minutes and i stop painting b cuz i thought i was going die i got so light headed i felt like i was going faint so i stop i had a mask and it was night time . Im going start again in the morning during the day when everybody is out and about so they dont have breath all that paint .but yeah that paint seems like it will be a very good paint once im done .
@BryanBuilt i wanna do a 3rd coat on mine, but it says not to after 6 hours. But it isn't glossy so I think it needs another. Any idea why they so not to after 6 hours?
Hi this is what i got from their website “• for use on Ceramic, porcelain, fiberglass, and acrylic composites. some surfaces may require specific prep requirements. Reference surface matrix for best results. if questions remain, please contact Homax, 1-800-729-9029. • Do not use on surfaces that will be exposed to flame or very high temperatures, kitchen sinks, toilet bowl interiors or places continually immersed in water. also not for hot tubs or stainless steel applications. Do not apply to stone, concrete, or other aggregate surfaces.”
Rustoleum does have a countertop paint that can be tinted but i have never used it . And i also painted my countertops a few months ago heres how i did it ua-cam.com/video/TD5X7_EVPBw/v-deo.html
Don’t waste you money or your time. This crap is hope in can. I do bodywork for a living and tried this. It doesn’t work. It winds up peeling every time and you have a bigger mess on your hands.
Guys please make sure to wear a organic vapor face mask while using the stuff it can cause brain damage! Please make sure you had the correct filters when using the stuff is very dangerous!
You are right! Sorry guys I used an N95 but be sure to use the correct respirator with correct filters
Thank you so much for the information, I’m about to paint my pink bathtub using this product and I had already bought foam paint rollers. lol
Is this product good for resurfacing the shower base? Not sure what material is made of.
Will it work to cover regular primer? The shower tile im working on already had primer on it? Thanks
Not sure but i would probably sand it fown
I painted my tiles 2 years ago with this product. I am going to repost it. Do I have to do 2 coats?
Hmm... Good Question. I'm not sure, but if it was mine, I would probably do one, then see how it looks and decide if the 2nd is necessary.
@@BryanBuilt good idea. I will do that. Thanks for the vid and the reply
I used it for my sink before watching this I did it too thick and have runs is this product able to be sanded to remove runs and then put a coat on top after sanded and cleaned ?
Yeah you should be able to sand once it fully cures and then reapply
Put too much on first coat and get some wrinkles. Dried faster than expected. Should I just sand everything down and start back over ?
I had a few areas like that i sanded them and did an extra coat
Hi your video. Doing the tub was very informative. For me, 1st should be how you cleaned the tub 3 times, sanding then the 3 times alcohol and brillow thing.. So I'm important.
Very important ! I would say spend as much time sanding and cleaning as needed
I just did my tub, and after following the prep instructions as exactly as I could I let it cure and it looks flat. Any suggestions?
Sorry to hear that! Maybe a bad batch i would reach out to manufacturer
Thanks for the realistic approaches!
Thanks for watching !
I did the spray paint with this brand turned out horrible can I go over it with the the same brand roll on ?
i would think you could but maybe a quick email to the manufacturer and they could tell you for sure
So my kitchen is a older style sink, cast iron ( and green ) I was wanting to give it a more updated look ( white ) I did the appliance epoxy, but that didn’t work. Several weeks later and it has scuff marks and peals. I was thinking about getting paint thinner and starting over with homax tough as tile. How is this product against hot water? And pots and pans ? What do you think? Any suggestions? Ty sir
Thanks for watching. Im not sure about sinks i have only used in tubs and showers before. I have used the spray epoxy and it does peel on sinks i havent tried this roll on stuff on a sink yet . If it were me i would give it a try i think the prep is key to it sticking not peeling
How long in between second and third coat
I waited like a week but only because i was busy on other things i think it says 12-24 hours on the can
Roller, paint brush or sponge brush
Foam roller and a throwaway brush preferably sponge
Great Video. Thank You.
Hope it helps on your tub!
you say 3 or 4 coat , does it mean I have to use 3 or 4 fresh box of thse product , when I mix two part how long it will can be use when lit was covered or these is Like opoxy hen mix two part havve to use and no storage option for second or third coat using agin left over epoxy or paint what ever was call .
No thankfully this is a 1 part epoxy coating as long as you cover the can well you can keep using the same can i was able to get 3 costs from 1 can
I’m about to use the spray can version on my kitchen sink. It says to let it cure for a 48 hours. Do you think I should let it cure longer? Also is my N95 respirator good enough?
The longer the better . And for the respirator i believe you need the pink cartridges
Wish you could do mine
bro are you in tulsa, asking because i know gomez maintenance
Yessir here in Tulsa
@@BryanBuilt Sick I'm subscribed, I'm Jesse the owner of Tulsa Hills Renovations in Tulsa. How does that tub kit hold up after time? I'm looking into doing a tub this weekend
@@tulsahillsrenovations4506 nice! Thanks for watching. I have used it 2 times once in this video which was a flip so i cant really tell and one other time on my downstairs bathroom . I think we had it for like 2 years and didnt have issues with it . But it was a standing shower so we just painted the walls on that one . Not sure about the tub
Ah no manches y como haces el mix
I'm bought a house that has tan/brown tile in the shower and I'm thinking about painting it white
I only got a can of paint! What is up with that?
Sorry to hear! Someone must have opened your box
That’s because they sell it primarily as only a can of paint. He is using the delux kit.
That stuff is strong speacily the one that comes in a quarts half gallon dammn i got so high with in like five minutes and i stop painting b cuz i thought i was going die i got so light headed i felt like i was going faint so i stop i had a mask and it was night time . Im going start again in the morning during the day when everybody is out and about so they dont have breath all that paint .but yeah that paint seems like it will be a very good paint once im done .
You don’t say how long to wait between coats?
I think the instructions say 4 hours. I did one coat in the morning and a second coat in the afternoon. and a 3rd coat like a week later
@BryanBuilt i wanna do a 3rd coat on mine, but it says not to after 6 hours. But it isn't glossy so I think it needs another. Any idea why they so not to after 6 hours?
Can I use this product for my kitchen counter in my RV?
Hi this is what i got from their website
“• for use on Ceramic, porcelain, fiberglass, and acrylic composites. some surfaces may require specific prep requirements. Reference surface matrix for best results. if questions remain, please contact Homax, 1-800-729-9029.
• Do not use on surfaces that will be exposed to flame or very high temperatures, kitchen sinks, toilet bowl interiors or places continually immersed in water. also not for hot tubs or stainless steel applications. Do not apply to stone, concrete, or other aggregate surfaces.”
Rustoleum does have a countertop paint that can be tinted but i have never used it . And i also painted my countertops a few months ago heres how i did it
ua-cam.com/video/TD5X7_EVPBw/v-deo.html
Thanks
Doing my shower today thank you for the advice
Thats awesome! Dnt forget your respirator
Talk about loving yourself
Ty off to Home Depot for respirator
Absolutely wrong kind of mask. That first one will NOT protect you from the fumes at all.
Don’t waste you money or your time. This crap is hope in can. I do bodywork for a living and tried this. It doesn’t work. It winds up peeling every time and you have a bigger mess on your hands.
thanks for sharing your experienece
Towel~e~ban 🤣🤣🤣
Classic