This is the exact video I needed. Thank you so much fellas. I have my side, front, and bottom panels completed, and just need to do the straps and back panel. Cannot wait until I get out on the trail with my myog gear, all thanks to Two Fools Walking. Much love from the states.
I make 110L and 90 L DCF backpacks for vol bivouac trips. I am absolutely amazed how great the shoulder strap design with the bottle holders. You are the Maestro. Also huge thanx to share your ideas. Big help for me.
when you're doing a zig zag stich on the elastic stuff, do you run it through twice? stitch one side, flip it over, stitch it again? I'm about to use some elastic webbing that's able to be folded over the edge of a fabric for some stretchy pockets tomorrow, which i think you're only supposed to run a zig zag stitch through once. now I'm thinking I might just fold the fabric over itself. did you forgo to elastic folded over the actual mesh just to save weight?
Eh ya I’m really enjoying your designs! Brilliant to put your creative into actualization!) Bravo Great attitude. Admirable! Thanks for putting together visual videos and sharing the pattern work. Just hit pause as your redoing the shoulder trace to be 90degress...so excuse if said later if being inpatient on commenting, thou I learned thru dcf research that if it’s stretch/weight pulled on its bias will warp so believe it also should be treated the same as fabric grain and take care to not over taunt it diagonally (heard its an issue on tents from weather making them wrap) if have a scrap of dcf try it out to see if true thou k;) Thanks again ⚡️✌🏼
Just been looking for straps for my next backpack and really appreciate the time you have taken to make the video. I like the idea of the longer wider straps as I am also looking to do away with my hip belt. The two over lapping pockets are a great idea how do they work out in practice?
I have looked forward to seeing the new straps...(did I miss something at the end?) Even though I always need a hip belt, I want to make wider straps, too.
Hey guys, downloaded your dxf file for the backpack you made and opened in autodesk, but how do I print out the figures in the file at the proper size? Sorry if this is a stupid question, never worked with autodesk before.
I love your videos ;) Just to confirm, on the CAD file (which I can open because I have a license for Bentley Microstation), these should be shortened by 5 centimeters to match the ones you have on the dyneema pack ? Thanks for your help. Great Videos. Love watching them.
@@twofoolswalking2109 Would not spacer mesh be lighter and provide some ventilation (good for warmer climates)? You could put some taffeta on the skin side to stop the chafing.
Hey ASCII I've seen your other comment (and 100% recommend LibreCAD!), I tried to make a PDF of it for this vid but realised im going to have to explicitly label all the dimensions because they can't just be measured like in CAD on PDF. That means it's gonna take a bit of time but I'll 100% make sure it's up as a pdf or image file for the next video :)
well it took me six months to get around to it but i have finally made a backpack with wide straps. thanks for sharing your ideas in such detail.
This is the exact video I needed. Thank you so much fellas.
I have my side, front, and bottom panels completed, and just need to do the straps and back panel.
Cannot wait until I get out on the trail with my myog gear, all thanks to Two Fools Walking.
Much love from the states.
I make 110L and 90 L DCF backpacks for vol bivouac trips. I am absolutely amazed how great the shoulder strap design with the bottle holders. You are the Maestro. Also huge thanx to share your ideas. Big help for me.
You should try chalk for tracing. It makes a really fine line and can be wiped off and won’t leave a mark.
Fun, as ever, watching you think, design and construct!
thanks for the video. just wondering how to print the dxf file to scale. loaded libreCAD and file open but i can print it. any ideas?
when you're doing a zig zag stich on the elastic stuff, do you run it through twice? stitch one side, flip it over, stitch it again?
I'm about to use some elastic webbing that's able to be folded over the edge of a fabric for some stretchy pockets tomorrow, which i think you're only supposed to run a zig zag stitch through once. now I'm thinking I might just fold the fabric over itself. did you forgo to elastic folded over the actual mesh just to save weight?
Eh ya I’m really enjoying your designs! Brilliant to put your creative into actualization!) Bravo Great attitude. Admirable!
Thanks for putting together visual videos and sharing the pattern work.
Just hit pause as your redoing the shoulder trace to be 90degress...so excuse if said later if being inpatient on commenting, thou I learned thru dcf research that if it’s stretch/weight pulled on its bias will warp so believe it also should be treated the same as fabric grain and take care to not over taunt it diagonally (heard its an issue on tents from weather making them wrap) if have a scrap of dcf try it out to see if true thou k;)
Thanks again ⚡️✌🏼
*warp lol
Superb video...as always! Great job! I love your content and I hope to get into my own DIY backpack soon! :)
Just been looking for straps for my next backpack and really appreciate the time you have taken to make the video. I like the idea of the longer wider straps as I am also looking to do away with my hip belt. The two over lapping pockets are a great idea how do they work out in practice?
Do you remember the thickness of the foam? 4mm?
Absolutely brilliant project ! May I ask which foam did you insert inside the straps ? Looking forward to see what's next, keep it up !
It's and EVA foam from extremtextil but, you can use an old roll mat
@@twofoolswalking2109 Thank you for the reply ! I hope the bag is going well after a year ! Safe travels!
I have looked forward to seeing the new straps...(did I miss something at the end?) Even though I always need a hip belt, I want to make wider straps, too.
I forgot to film them I was so chuffed with them.... now its a cliff hanger though!
Hey guys, downloaded your dxf file for the backpack you made and opened in autodesk, but how do I print out the figures in the file at the proper size? Sorry if this is a stupid question, never worked with autodesk before.
Hey friend, unfortunately I've never used Autodesk so I can't help, sorry
@@twofoolswalking2109 what program do you use?
I love your videos ;) Just to confirm, on the CAD file (which I can open because I have a license for Bentley Microstation), these should be shortened by 5 centimeters to match the ones you have on the dyneema pack ? Thanks for your help. Great Videos. Love watching them.
Cheers friend 🤟, the straps on the CAD file should indeed be shortened by 5cm to math the cuben pack
Really solid content! Where do you guys get your fabrics and other gear? Anyway, great job on the videos, keep it up!
I've bought fabrics from: extremtextil, dutchwaregear and adventurXpert. Glad you enjoyed the video!
A lot of people use spacer mesh for the back of the straps, any particular reason you don’t?
I'm quite a strong advocate against spacer mesh, its heavy, expensive and cheese graters my shoulders when I'm not wearing a shirt.
Yay, weekend!
On a more serious note, does the foam really add much over the wide straps other than weight?
I think you need enough (but not a lot) foam such that the straps don't collapse/narrow on themselves
@@twofoolswalking2109 Would not spacer mesh be lighter and provide some ventilation (good for warmer climates)? You could put some taffeta on the skin side to stop the chafing.
I can't open your jester file because I don't have the s/w that will read it. Could you upload it as a PDF?
NVM. I realize I just need to find librecad. Thanks
Hey ASCII I've seen your other comment (and 100% recommend LibreCAD!), I tried to make a PDF of it for this vid but realised im going to have to explicitly label all the dimensions because they can't just be measured like in CAD on PDF. That means it's gonna take a bit of time but I'll 100% make sure it's up as a pdf or image file for the next video :)
Where do you source your materials, dyneema etc?
Extremtextil, it's a company based in Germany, I believe they are the European distributors of Dyneema.
What kind of sewing foot you're using at 15:51 and why?
Its a walking foot attachment (I talk about it in part I) it makes sewing stretch fabrics easier as pulls the fabric from the top and bottom.
Do you not use a water bladder?
Nope, I'm a bottles man
Supercool
Where did u get the dyneema?
A German website called extremtextil is the European distributor