Great video man! I was stuck with my tie rod not being able to remove it no matter how much I hit it with a hammer. After watching your video and applying a torch to it the tie rod bolt finally came off. Thanks for sharing!
This helped me. However I had to hit it several times after heating the outer tie rod for 1.5 to 2 minutes. A tip is turn the steering avd Get proper access for hitting with higher force. Mine were really stuck!
It's not an exact science heat it up see if it'll come out if it doesn't then heat it up more or for longer see if it'll come out it still doesn't then heat it up even longer and so on till it comes out if you get it hot enough should come right out with a few bangs of a hammer
He was using a 1lb hammer that won’t do Squat. U need 3lb or 4 it would be out in an instant. Also pickle fork cheap to buy. But not thinking is fine too 😂
Cut it off with angle grinder such as this amzn.to/3i236lj I linked example of this power tool you can get on Amazon I'm talking about you'll want to use to remove that spinning tie rod nut / bolt that just spins & won't come off!!!! I really hope this helps good luck I'm 100% sure this well work for u cut off or grind off nut then remove as shown in this video with hammer & heat!!!! my 2 cents
Just hit the side of the A frame, where the outer tie rod bolts into, with a heavy hammer, very hard. The vibration will shock the tie rod out of the hole. Old mechanics trick.
Tool Shown In Video Linked Below
amzn.to/3jG4H04
Tie Rod End Removal Tool Universal 1-in-5 Linked Below
amzn.to/3g1k14W
Great video man! I was stuck with my tie rod not being able to remove it no matter how much I hit it with a hammer. After watching your video and applying a torch to it the tie rod bolt finally came off. Thanks for sharing!
Hell ya glad video was able to help point you in right direction!!!!
Worked like a charm, thank you very much! This should be the top video for this problem.
100% Agreed!!!!! LOL Glad It Helped!!!!
wow... can confirm.. this worked way better than trying a pry bar and hammer - thanks!
Thanks for the feedback glad to hear it worked for you & video was able to help get her done!!!!
Thank you for the suggestion to use heat. It worked great once I put it on there for 2 minutes.
This worked so well for me, thank you for sharing 👍🏻
Glad to hear it worked for you & thanks for feedback glad it helped!!!
Perfect! Exactly what I needed. THANKS
Nice i will try it tomorrow, my outer tie rod end is really siezed on there, hope this works
Heck ya do it!!!
Ive tried everything. Ill get the torch tomorrow and see what happens. Ill try to update if itvworks... thanks
I also did this here in Philippines,,it worked!
Hell ya glad to hear video was able to help!!!
u are 100% correct thanks alot besafe always
This helped me. However I had to hit it several times after heating the outer tie rod for 1.5 to 2 minutes. A tip is turn the steering avd Get proper access for hitting with higher force. Mine were really stuck!
Imma try it. Thanks bossman!
This is my option now, thanks mate
No worries mate glad video was able to help :) !!!!
How long did you heat it for because mine has broken right on the steering knuckle side
It's not an exact science heat it up see if it'll come out if it doesn't then heat it up more or for longer see if it'll come out it still doesn't then heat it up even longer and so on till it comes out if you get it hot enough should come right out with a few bangs of a hammer
I may only have half the tools I need to get the job done but at least I have a butane torch laying around because I’m a pothead 🤣
lol 🤣
Thank you very much sir
No problem happy it helped!!
Don't need to heat just hit the sides of the cast it will pop off
He was using a 1lb hammer that won’t do
Squat. U need 3lb or 4 it would be out in an instant. Also pickle fork cheap to buy. But not thinking is fine too 😂
@@jecrpalier 3lb hammer didn't even work in my case.
how long did you keep heat on it?
How do you remove a nut on a tie rod? All the nut and bolt did is spin
Cut it off with angle grinder such as this amzn.to/3i236lj I linked example of this power tool you can get on Amazon I'm talking about you'll want to use to remove that spinning tie rod nut / bolt that just spins & won't come off!!!! I really hope this helps good luck I'm 100% sure this well work for u cut off or grind off nut then remove as shown in this video with hammer & heat!!!! my 2 cents
Use the handsaw to cut a grove at the tie rod thread end. Put the flat screw driver in the cut grove as a stopper and loosen the tie rod nut.
So tell me please because I can't see where you are applying the heat. Is it on the knuckle or on the threaded tie rod stud?!
Yes sir apply heat all around the knuckle where the bolts goes through & is stuck top & bottom of knuckle!!!
@@EverydayImTECHnIt thank you I will try that
@@mariolibertad9972 Sounds good let me know if it works for u make sure you get it hot hot hot & should come right out.
Worked! Fk that was frustrating. Hopefully the other side is easy
No one ever explain which part to heat up. The bolt or the A frame?
not the bolt.
Just hit the side of the A frame, where the outer tie rod bolts into, with a heavy hammer, very hard. The vibration will shock the tie rod out of the hole. Old mechanics trick.
Yeah old trick that doesn't work everytime.