Stunning rifle,Great and informative video as usual specially for me my compact version has arrived today and watching this video is great, helps to find out the best way to mount it in the Centre and how tight to tighten the screws for the barrel clamp👍🏼
I fitted one of these to my impact and all seemed OK, then after a week I noticed that I could not zero my slugs, but pellets were unaffected. I tried many things to correct this but to no avail then some makes of pellets started to play up, in the end I removed the barrel clip and all want back to normal. The clip was under no strain and the screws were only finger tight but it just didn't like it being on. So if anyone has a zero problem take the clip off and try it.
Awesome video. This rail itself do look cool - but I dunno if Id ever install one, if gotten this rifle that is. These Impacts look cool even without them. I'd never bother to buy a bipod for the top rail cuz I think Id just get a mess of poi changes - as even got a mention in the video. But if getting one - the screw tightness for accuracy test shown here was definitely very informative for any FX M3 owner. Probably just a small dab of PTFE pipe sealant on the screw threads to keep em locked when in use - and to get em out easily when eventually needed.. Btw.. This rifle setup looked way cool! Loved the buttstock piece and all cool mods done to the rifle overall. Way cool!👍🏻👍🏻
I just added a longer screw to the picattiny rail to stop the barrel moving, but a chap with your talent could come up with something much better , it certainly makes a world of difference to my delta wolf 👍
Great vid. Have watched everything you have posted. I have just installed a 720 power plenum on my fx m3. I now have a leak from the 2nd reg. Have replaced all Orings including the hard one. Still have a leak. I have degassed the M3. Closed the reg 2 valve. Reattached the bottle. Bottle reg and reg 1 registering. Left the M3 for 24 hours no creep or leaks. I then open the reg 2 valve very slowly not even 1/4 turn and air just rushes out of the regulator/ adjuster screw. Any help or ideas..
Hello, I really enjoy watching your videos and learning from you. I'm amazed by your skills I have stripped one of the bolts that holds the rail the two in the back. How do I fix it? Can you please make a video about fixing stripped bolts on air guns please
Loved the video! I've just purchased the M3 in sub12. I'm looking to extend the shroud to 700mm as you have done in this video. Do you know if the 700mm integrated tuner shroud will screw on just like you demonstrated with the standard one in the video? Thank you!
awesome video the gun looks awesome but I do have a lot of problems with aftermarket bubble levels but they do work if you get them right thanks for sharing bsafe buddy 👍
Have just fitted one but scope now doesn’t fit, did u go high mounts for 56mm scope?? I originally had low and the scope is just touching rail, thought I may get away with medium.
Watch another vid where an element titan mounted with FX high mounts wouldn't fit on the longer trs, Also just received my compact trs from B&K the shroud clamp does not have the 2 delrin washers is this correct please. BRGDS Chris
@@baghdadmerc69 I have a vortex strike eagle 56mm on eagle vision mounts and it first perfect with bout 15mm gap and this is the longer standard rail, the screws in the delrin clamp don't fit there too short, sabre are aware of this I've been told, tbh poor effort from sabre, didn't even make it right length for 600s you'd of thought that they'd think these things thru
It must just have been his mounts he said they were high but maybe he was mistaken, also the screws fit nicely into the clamp with no delrin washers so should be ok, I'll mount it shortly just wanted to check if they're not needed with the compact trs or are indeed missing and need to be used 😎👊👍
Hey I have a question I wanted to ask you For doing the same changes you did to the Impact to make the sub 12ft to be like the normal one you need the parts from: 1. FX 20603 And 2. The complete x3 parts-group from the spare parts right? Am I missing something or are those the parts that are changed? Thanks in advance
Yep those are some of the parts, I also but the valve adjuster on mine, C41 to C51, although some of the kits bundle them with the 720 power plenum. Thanks for watching
Stunning rifle,Great and informative video as usual specially for me
my compact version has arrived today and watching this video is great, helps to find out the best way to mount it in the Centre and how tight to tighten the screws for the barrel clamp👍🏼
No problem, glad you liked it. Thanks for watching.
Use a screwdriver Bash 🤣
Hey Bash M, did your compact trs come with the delrin washers for the shroud clamp please.
BRGDS
Chris
@@baghdadmerc69 yes it did, exactly same as the full length with all accessories just shorter👍🏼
I fitted one of these to my impact and all seemed OK, then after a week I noticed that I could not zero my slugs, but pellets were unaffected.
I tried many things to correct this but to no avail then some makes of pellets started to play up, in the end I removed the barrel clip and all want back to normal. The clip was under no strain and the screws were only finger tight but it just didn't like it being on. So if anyone has a zero problem take the clip off and try it.
This another I missed bloody marvellous.
thank you 😀
@sub12airgunners mate they are all worth watching, 👌
Awesome video.
This rail itself do look cool - but I dunno if Id ever install one, if gotten this rifle that is. These Impacts look cool even without them. I'd never bother to buy a bipod for the top rail cuz I think Id just get a mess of poi changes - as even got a mention in the video. But if getting one - the screw tightness for accuracy test shown here was definitely very informative for any FX M3 owner. Probably just a small dab of PTFE pipe sealant on the screw threads to keep em locked when in use - and to get em out easily when eventually needed..
Btw.. This rifle setup looked way cool! Loved the buttstock piece and all cool mods done to the rifle overall. Way cool!👍🏻👍🏻
Thanks much appreciated, yeah bi-pod seems like a little liability, but thanks for the comment. Thanks for watching.
Good video i will stick to what I got on my sub 12 ft thanks again for putting your time and effort in to the video 👍
No problem, glad it helped. Thanks for watching.
That’s what the delta wolf needs , the barrel clamp , great vid as always
A barrel clamp may be a good upgrade for the DW, I might have to try making one and experimenting. Thanks for watching.
I just added a longer screw to the picattiny rail to stop the barrel moving, but a chap with your talent could come up with something much better , it certainly makes a world of difference to my delta wolf 👍
Very nice. Turns an already handsome rifle into a bit of a stunner 😍
Cheers Tony, its turned into a real nice rifle now. Thanks for watching.
Great vid. Have watched everything you have posted.
I have just installed a 720 power plenum on my fx m3. I now have a leak from the 2nd reg.
Have replaced all Orings including the hard one. Still have a leak.
I have degassed the M3. Closed the reg 2 valve. Reattached the bottle. Bottle reg and reg 1 registering. Left the M3 for 24 hours no creep or leaks. I then open the reg 2 valve very slowly not even 1/4 turn and air just rushes out of the regulator/ adjuster screw. Any help or ideas..
Another excellent video guys.
Thanks much appreciated. Thanks for watching.
Hi Jeff, great video as usual buddy, thanks.
I’m loving and a bit jealous of your own M3 mods. 👍
Cheers, it looks like it should now, the sub 12 ones always look a little spindly but I am really happy with how it looks now. Thanks for watching.
Congrats on hitting 8K subs Jake 👊👍
Cheers Matt, 8k coming up steady hopefully 10k soon. Thanks for watching.
Hello, I really enjoy watching your videos and learning from you. I'm amazed by your skills I have stripped one of the bolts that holds the rail the two in the back. How do I fix it? Can you please make a video about fixing stripped bolts on air guns please
I mean I stripped the stock where the screw goes in
As always really informative video loads of detail but you didn't mention the single shot loader or where you got it from.
thanks for watching 😀 that's the rowan ssl 👍 the best one i have found
Would love to know how the long rail looks on compact m3
Looks amazing mate I really like it 👍
Cheers yep its a real nice looking bit of kit. Thanks for watching.
Loved the video! I've just purchased the M3 in sub12. I'm looking to extend the shroud to 700mm as you have done in this video. Do you know if the 700mm integrated tuner shroud will screw on just like you demonstrated with the standard one in the video? Thank you!
no i don't think so, i have a 700 shroud but i made a spacer to extend the barrel so the shroud had something screw on to
awesome video the gun looks awesome but I do have a lot of problems with aftermarket bubble levels but they do work if you get them right thanks for sharing bsafe buddy 👍
Cheers, they can be dodgy but the one on the rifle doesn't look bad, Thanks for watching.
Brilliant video thank you
Glad you enjoyed it
Great video keep em coming
Thanks will do. Thanks for watching.
Thanks for this. I prefer the long one, looks good. 😁
Cheers, Thanks for watching.
This looks great, does anybody know if this rail would fit a dreamline tactical, or crown tactical.
Have just fitted one but scope now doesn’t fit, did u go high mounts for 56mm scope?? I originally had low and the scope is just touching rail, thought I may get away with medium.
i used the FX adjustable mounts and they seem to work ok 😀
Good information a as usual..
cheers much appreciated. Thanks for watching.
Looks good 👍🏻👍🏻
Thanks much appreciated. thanks for watching.
With that being sub 12, what is the shot count per fill?
I have not counted but easily 400+ from a 250bar fill. Thanks for watching
@@sub12airgunners that's incredible lol
Would you happen to know if a 56mm objective scope will fit with eagle vision rings with the TRS rail
No idea sorry, best bet is to mount it on a pic rail and use a ruler or straight edge to see if the scope is lower than the rail. Thanks for watching.
Watch another vid where an element titan mounted with FX high mounts wouldn't fit on the longer trs,
Also just received my compact trs from B&K the shroud clamp does not have the 2 delrin washers is this correct please.
BRGDS
Chris
@@baghdadmerc69 I have a vortex strike eagle 56mm on eagle vision mounts and it first perfect with bout 15mm gap and this is the longer standard rail, the screws in the delrin clamp don't fit there too short, sabre are aware of this I've been told, tbh poor effort from sabre, didn't even make it right length for 600s you'd of thought that they'd think these things thru
It must just have been his mounts he said they were high but maybe he was mistaken, also the screws fit nicely into the clamp with no delrin washers so should be ok, I'll mount it shortly just wanted to check if they're not needed with the compact trs or are indeed missing and need to be used 😎👊👍
very nice
thank you 👍
Hey I have a question I wanted to ask you
For doing the same changes you did to the Impact to make the sub 12ft to be like the normal one you need the parts from:
1. FX 20603
And
2. The complete x3 parts-group from the spare parts right?
Am I missing something or are those the parts that are changed?
Thanks in advance
Yep those are some of the parts, I also but the valve adjuster on mine, C41 to C51, although some of the kits bundle them with the 720 power plenum. Thanks for watching
Makes it look really mean - it helps that you have arms like popeye to lift it 😁😁 You just need to get the 700cc bottle on there now
Heavy is an understatement, although with dual 700cc bottles and we might just get a range day without needing to fill up, thanks for watching
👌👍😊
Thanks for watching.
😁