Showing you the new TRS rail by Saber Tactical up and close , going over the features aswel as how to install it. Music credits : Epidemic sounds Cut the Mustard - Tigerblood Jewel
I am still debating which way to go . The lower extended rail or this new extended shroud. My reasoning is the weak point on the the three top rail screws from FX. Especially the two smaller long Allen screws . You are asking those screws to hold the scope and the load on a bipod . The lower rail has beefier screws to do the job and it only has to support the bipod . The other question would be if you have seen any improvement in accuracy between the two ? Bling is one thing , reliable function and accuracy is another . Then there is the price of $150.00 vs. $250.00 . I’m leaning more to the lower rail unless you have seen any improvements down range with one over the other .
I see what you mean 👍 I am not worried about the screws that hold the rail in place , almost the 3 of them the can hold a lot specially in the direction the forces will be applied in my opinion. I haven’t had the chance to see if I get different results between a bottom mounted bipod or a over the barrel one simple because I don’t have a over the barrel one …. Just yet 😉
Airbuks, When do you think Saber Tactical will come up with a dolly wheel attachment so I can haul my highly modified 50 pound Impact around . 😁 Kidding aside , nice video and sharp looking rail .
🤣🤣 you are 100% right , a dolly could come in handy to go to the range. But once at the bench it’s all beneficial 😉 they do make some great accessories 👍
Interesting part. But I believe this directly impacts barrel harmonics. Free floating barrel is gone then. I think the barrel tuner is after installing the rail and 12 o'clock bipod obsolete. What do you think?
Indeed the barrel clamp fixes the barrel and not free floating anymore, if the barrel tuner still has a affect I still have to test . But it will be interesting to see what will be more accurate with clamp and without barreltuner or without clamp and with tuner 🤔
Thank you for the fast response .Im super excited what will be the outcome of this test. Do you think this rail housing can be used reliable without the barrel support inlet? That would keep the barrel free float or?
🤔 for me I only have experience with 2 brands and that’s Donny and Huma . If you go for most quite I would always look for the biggest expansion chamber so a Ronin / Emperor or a Huma mod 50 ( you can make it longer or shorter) . I know these are huge moderators but if you can live with a little big more noise and not the quietest a fat boy 2.0 or a shorter mod 50 is a good middle ground
First happy new year mate, Great video. Question so looking at trs rail the only thing I worry about my .25 m3 shooting great at the moment but obviously I've not taken my barrel off yet , Is the a special way it goes in as there is a slug and pellets port. Also what do you think of the clamps that just go round the bottle and barrel do you think that would stiffen the barrel ..? Thank you..
Hi , happy new year to you aswel! The clamp doesn’t stiffen the barrel it’s there to hold it and make sure the poi doesn’t change when conditions change and the barrel is in line with the scope rail . Works great as long as you don’t use the clamp and a over the barrel bipod, if you understand what I mean . The barrel is easy to turn around and flip from pellet side to slug side . What is the question about that actually
@Airbuks Hi mate , yes the barrel when you slide it back in , I wasn't sure if there was a correct way to put it in? Or it dosnt matter which way it goes in I am shooting pellets and slugs at the moment. Thank you..
What about 500with standard shroud, (not compact shroud) because i will use 22 500mm and 25cal 700mm if i install the standard TRS shall i be able to use the original 500mm shroud and the hollow silencer that came with the gun?
@@Airbuksokay. I ordered the TRS with Krale yesterday and had them send an extra clamp. Just curious what it does with an extra clamp. I’ll let you know. 👍🏻
@@nickvanderheijden5574 Interesting! I’ve heard the TRS with the band does help keeping a good POI incase of accidental knocks to the barrel out in the field, which would make sense.
@@Airbuks Krale in Holland promissed they would arive soon but still nothing there... I need the power block, tungsten hammer, upgrade pin in brass for regulator, 800mm barrel, barrel tensioner kit... you name it ... and you can not buy it... 🤣
@@MasonStormSunny hi mate , thx for the advice 👍 but sadly enough there are no paid promotion. From time to time I get the product send to me but most of them are marked as promotional
Saber Tactical should have given the shroud extender to customers that originally bought this for their 600mm barreled Impacts. Originally their website said that this fit a 600mm barreled impact then they changed their website giving the length of rail but not saying it wouldn’t fit a 600mm barrel without some modification. I feel this was a cheesy way of shirking responsibility for bad information to their customers. I wrote to them about it and never heard back.
🤔 I also don’t see it , but as I explained in the video the adapter piece will be a limited run as in there next batch they make the TRS rail a touch shorter to eliminate that adapter. If you need it you can send them a mail I guess
@@Airbuks i appreciate the info. I had already bought the full trail for my father in law which is why I'm looking for the adapter. He came across your video when it wouldn't fit.
@@Airbuks can you pair trs with tension barrel? I have CF instaled too. Do you think all those three improvments work hand in hand together? Thanks for help!
@@SHOOTER3258 yes you can pair it but you need the correct barrel clamp as the tensioning kit is thinner . They work hand in had and should give you a improvement 👊
looks incredible! thank you for sharing...
Thx 🙏
Man wat heb jij leuk speelgoed. bedankt voor de informatieve video....keep them comin
Ik weet het 🤩 prijs mezelf gelukkig 😁
Bad ass looking setup my friend!
Thx 🙏
I am still debating which way to go . The lower extended rail or this new extended shroud. My reasoning is the weak point on the the three top rail screws from FX. Especially the two smaller long Allen screws . You are asking those screws to hold the scope and the load on a bipod . The lower rail has beefier screws to do the job and it only has to support the bipod .
The other question would be if you have seen any improvement in accuracy between the two ?
Bling is one thing , reliable function and accuracy is another . Then there is the price of $150.00 vs. $250.00 .
I’m leaning more to the lower rail unless you have seen any improvements down range with one over the other .
I see what you mean 👍 I am not worried about the screws that hold the rail in place , almost the 3 of them the can hold a lot specially in the direction the forces will be applied in my opinion.
I haven’t had the chance to see if I get different results between a bottom mounted bipod or a over the barrel one simple because I don’t have a over the barrel one …. Just yet 😉
Just ordered one 👍
Kool looks like a star wars gun thanks for sharing bsafe buddy 👍
😁 yes it does make it look more Star Wars like 😉
@@Airbuks but it looks badass 😎 my friend with the 600mm barrel
No thread lock is necessary?
Great video.🤠🇺🇸
Airbuks,
When do you think Saber Tactical will come up with a dolly wheel attachment so I can haul my highly modified 50 pound Impact around . 😁
Kidding aside , nice video and sharp looking rail .
🤣🤣 you are 100% right , a dolly could come in handy to go to the range. But once at the bench it’s all beneficial 😉 they do make some great accessories 👍
nice product and video
Thx 🙏
Interesting part. But I believe this directly impacts barrel harmonics. Free floating barrel is gone then. I think the barrel tuner is after installing the rail and 12 o'clock bipod obsolete. What do you think?
Indeed the barrel clamp fixes the barrel and not free floating anymore, if the barrel tuner still has a affect I still have to test . But it will be interesting to see what will be more accurate with clamp and without barreltuner or without clamp and with tuner 🤔
Thank you for the fast response .Im super excited what will be the outcome of this test. Do you think this rail housing can be used reliable without the barrel support inlet? That would keep the barrel free float or?
Very good ! 👏🏻👏🏻👏🏻👏🏻👍🏻🤝🏻
Thx
Very nice...please where can i have like your carbon fibre shroud?
That is a DIY project I made from a harmonic barrel tuner
Great step by step video. I just ordered mine. What brand is the bipod that mounts on the top rail?
Thx , i guess the bipod you are referring to is the GRS bipod
Airbuks
I would like to see different configurations of bipod attachments with this rail . Eliminating the bottom rail if that’s possible .
🤔 if I could get my hands on a few different models yes , but that will be costly 😬😉
Issue: ua-cam.com/video/wdkI5c01uTI/v-deo.html
Hey, brother, I follow you all the timeI recommend a suppressor for my fx impact m3 caliber 30??
🤔 for me I only have experience with 2 brands and that’s Donny and Huma .
If you go for most quite I would always look for the biggest expansion chamber so a Ronin / Emperor or a Huma mod 50 ( you can make it longer or shorter) .
I know these are huge moderators but if you can live with a little big more noise and not the quietest a fat boy 2.0 or a shorter mod 50 is a good middle ground
First happy new year mate, Great video.
Question so looking at trs rail the only thing I worry about my .25 m3 shooting great at the moment but obviously I've not taken my barrel off yet , Is the a special way it goes in as there is a slug and pellets port. Also what do you think of the clamps that just go round the bottle and barrel do you think that would stiffen the barrel ..?
Thank you..
Hi , happy new year to you aswel!
The clamp doesn’t stiffen the barrel it’s there to hold it and make sure the poi doesn’t change when conditions change and the barrel is in line with the scope rail . Works great as long as you don’t use the clamp and a over the barrel bipod, if you understand what I mean .
The barrel is easy to turn around and flip from pellet side to slug side . What is the question about that actually
@Airbuks Hi mate , yes the barrel when you slide it back in , I wasn't sure if there was a correct way to put it in? Or it dosnt matter which way it goes in I am shooting pellets and slugs at the moment. Thank you..
@@simoncoher4841 if you shoot pellets and slugs you can use the dual port
@Airbuks Thanks mate, I've just ordered the trs rail . Keep the videos coming especially the M3 🙌👍
Mantap jiwa bosku smoga bisa punya yunit impian aminnn... 😭😭😭
Does the compact version cover the whole 500mm barrel? Would really like to know
Didn’t I show this in the video 🤔 I don’t have it installed at the moment I will check when I am back from holiday
Thanks for this video. Do you think it is possible to adapt it to the FX Maverick?
Hi , saber tactical has released one for the Maverick now 👍
Hi I have the 600mm harmonic shroud and tuner ild like to see what it looks like in compact and standards lengths please
What scope mount with quick release do you have? Thx.
That wil be a Spuhr mount 👍
Great video. Thank you. Does the compact come with the delrin clip for the barrel.
Yes it does 👍
@@Airbuks thank you
Great Video, what is the make of the quick release scope mounts - I take it they don't come with the Element Nexus?
Thx , I indeed that doesn’t come with the scope 😉 it’s from a company called Spuhr . Very good but very pricey 😬
@@Airbuks Thanks for the reply - do you know the Model number for the quick release scope mount you have?
@@brianpotts9899 don’t remember 🤔 but I have made a video about it 😉
What about 500with standard shroud, (not compact shroud) because i will use 22 500mm and 25cal 700mm if i install the standard TRS shall i be able to use the original 500mm shroud and the hollow silencer that came with the gun?
What do you mean mate , 500mm shroud is a compact shroud ? For the 500mm there is only one size shroud as far as I know ?
@@Airbuks the original shroud is longer than the compact version shroud
@@biakmawia ?? Do you mean the extendable one . My 500 barrel all have the same original FX shroud
Do you think there might be a positive effect on accuracy and rigidity when I install a second shroud support halfway on the TRS using an M-Loc slot?
Personally I would keep it free floating for best accuracy
@@Airbuksokay. I ordered the TRS with Krale yesterday and had them send an extra clamp. Just curious what it does with an extra clamp.
I’ll let you know. 👍🏻
@@nickvanderheijden5574How did you go? Tighter grouping at all?
@@CoDSniper34324Hi, no difference. I have no barrelband at all at the moment. Just to see if that changes anything.
@@nickvanderheijden5574 Interesting!
I’ve heard the TRS with the band does help keeping a good POI incase of accidental knocks to the barrel out in the field, which would make sense.
Hi friend, I have m3 sniper 700mm if I would like to buy a TRS rail like your how much it would cost me ? & where to order
Hi , I buy all my stuff at Krale Schietsport and the standard rail will set you back about 299€
Which rail is this model because on NET the standard rail has 6 lower windows?
In the video I show the standard and compact rail . I believe these are the only ones 🤷♂️
looks great but i'm still waiting for the power block and whatever fx makes to power up the M3... 🙂
Me to buddy 😉 can get the parts just yet
@@Airbuks Krale in Holland promissed they would arive soon but still nothing there... I need the power block, tungsten hammer, upgrade pin in brass for regulator, 800mm barrel, barrel tensioner kit... you name it ... and you can not buy it... 🤣
@@moekakke indeed , I guess they will have it in stock soon
@@Airbuks Please always mark a movie if there was any paid promotion, otherwise you can get a permanent ban from YT.
@@MasonStormSunny hi mate , thx for the advice 👍 but sadly enough there are no paid promotion. From time to time I get the product send to me but most of them are marked as promotional
Saber Tactical should have given the shroud extender to customers that originally bought this for their 600mm barreled Impacts. Originally their website said that this fit a 600mm barreled impact then they changed their website giving the length of rail but not saying it wouldn’t fit a 600mm barrel without some modification. I feel this was a cheesy way of shirking responsibility for bad information to their customers. I wrote to them about it and never heard back.
I have been told that they have modified the length of the second batch to suit the 600mm and eliminates the need of the adapter
usable for fxmaverick ?
Yes indeed only fits the impact
Why didn’t you installed the spur mount?. It doesn’t fit or what?
You have to take a closer look at the video 😉 the Spuhr mount is still on it
Do you think it will fit on a maverick ?
No it won’t fit the Maverick, the mounting points are different
Hello,will it fit the Maverick? Thanks
No this is specific for the impact
Hello, thanks for the reply
Is that adapter available? I don't see it on ST's website
🤔 I also don’t see it , but as I explained in the video the adapter piece will be a limited run as in there next batch they make the TRS rail a touch shorter to eliminate that adapter.
If you need it you can send them a mail I guess
@@Airbuks i appreciate the info. I had already bought the full trail for my father in law which is why I'm looking for the adapter. He came across your video when it wouldn't fit.
@@DD-gq1uq try emailing them if you need it
my compact version i didnt use the shroud parts made poi shift
Interesting 🤔
👍
Can you instal them on mk2 impacts?
Yes no problem 👍
@@Airbuks can you pair trs with tension barrel?
I have CF instaled too.
Do you think all those three improvments work hand in hand together?
Thanks for help!
@@SHOOTER3258 yes you can pair it but you need the correct barrel clamp as the tensioning kit is thinner .
They work hand in had and should give you a improvement 👊
Thebest
Thx
Cud you try it on a maverick
This rail is only for the impact 👍
😎
Nice rail, but morbidly expensive !!
Yes indeed , it’s about the same price as other options for the impact .
A very appropriate word in my opinion 😂
Pesannya bagaimana apakah di Indonesia sudah ada
yes
I live in Thailand Where can I order?
I don’t know that 🤔
Heavier......
Yes a little bit , but with more rail added it’s normal 😉
@@Airbuks 😁
Cek berapa harganya
Saber Tactical is the most over triced parts out there.
Mau