Great video PJ! I’d personally verify overall length as some storm doors are thicker than others. If a customers door is less than 5 years old the manufacturer may cover replacement of a damaged lock and or damaged hardware if bought through a big box store. The aftermarket profile locks are usually more rekey friendly so good to have in stock. Great to know you carry them! Thanks for sharing! #lockboss
Wish I had heard all this earlier in life! We had bought a house, and didn't even have a key to the storm door-and the lock was an older one without the hex screws. More or less lucky to have managed to get it rekeyed up with the rest of the house, as you suggested, without messing it up! #lockboss
Thank you so much you don’t know how helpful you are. I don’t know you at all personally but I feel as if we’re both pretty good friends just because you’ve been teaching me a lot and I’ve been learning a lot. Thank you again my buddy have a great week.🎉
I see a lot of patio doors with multi-point locks having profile cylinders - good to know GMS has a great offering of keyways & finish options! Thanks, PJ! #AccessLockKeyLLC #HaulinBrass #LockBoss
Fantastic video pj ..I have absolutely installed 1000 of storm doors and you are spot on the big orange store will rekey to match your existing key or you can do it your self if I can remember..ya mind is going ..but it's really great to know you stock them ...#lockboss 🏝😎
Great information and timely. Just installed a storm door on my house. It is Kwikset. My house is Schlage. Will be ordering one in the near future!!!! #LockBoss.
This is very spot on! Before becoming a Locksmith I rekeyed a few dozen KW1 Euro Profile Cylinders in the retail setting, they are really easy! #LockBoss
I find these locks very interesting and I was surprised to have ran into them in the field a couple of times. Andy Perrin on the #lockswood UA-cam channel does a lot of work on these in England..great guy, Locksmith and channel! #lockboss
I have used these often. It is always good to be able to match all the locks on a customer's house so they can use just one key. I usually carry a variety of rim cylinders so I can also match the roll up garage door if there is one. Thanks for the video! #Lockboss
Thanks for the info, PJ! I haven't encountered a euro-style cylinder yet, but this helps for when I do. I've discovered that when you know how a lock works, you can often figure out the disassembly or install process. #Lockboss
One of the very few instances in America where we use profile cylinders. I love those little things though. The old ones make great training locks. #lockboss
Awesome information for any #lockboss I sometimes run into these Euro Profile cylinders and it's great to know there are GMS replacements available in various common US keyways, which apparently are stocked at CLK Supplies. Thanks for the .pdf -- very useful information PJ.
I didn't know GMS made a universal replacement for these. Good to know. Definitely can use a couple of duranotic finish. Common on storm doors around here for some reason. #Lockboss
always have a lot of people asking to do screen doors now thank to CLK I can always offer my customer the option to have one key for both doors #lockboss
If you are ever trying to identify a screen/storm door Euro profile cylinder that is 23mm inside / 31mm outside, it's for an Andersen Windows door, and replacements are available from them in KW1 and SC1 and in several finishes. They're they only ones who do that size, as far as I know. #lockboss
I had an issue for 1 client where Andersen didn't have a kw1 replacement but it was the French inswing and had a rim cylinder dressed up for the profile mechanism.
So I got a new house last year and the keys only worked on the front door. So pulled the rest of the locks and rekeyed them all the same. Except the screen door. Researched euro locks only to see they were only rekeyable with special tools. So I just pulled out the Lishi and picked to read the bitting to make a key. Ended up having a issues with the door handle and pull the lock a few weeks after to find the set screws that top each pin chamber. I felt stupid not pulling it before. But keyed it the same as the rest of the house now. Lesson learned. #Lockboss.
Hey PJ, you should do more product reviews of your inventory at CLKsupplies. I like buying from there and when I'm unsure on an item a video review makes my decision much easier. #Lockboss - Daniel
Many of those locks won’t come out the door without pushing on the retainer on the inside side. I use the Kwikset smart reset tool to get inside the small hole to do this. #Lockboss
I use them all the time. but it is hard to find the right size. the one that works on most storm door is 2 1/8" long with only 3/4 in on thump turn size. and 1in on key side. PJ you may what to bring this up to GMS Thanks #lockboss
Can I order this to fit my new Larson storm door? I asked A local locksmith they have no answers , please tell me what I need ,I can take it to A locksmith.Thanks
Neat. Just curious, even with it being a 5 pin lock, would a 6 pin key (SC4) fit? You forgot to mention Gates, which use these alot as well. #Lockboss. Welcome to the itchy and scratchy Show.
I’ve pinned so many profile cylinders in my locksmith career but not lately though but here’s a little tip for my fellow locksmiths. When rekeying profile cylinders not GMS I think the popular one here in CA are I think a brand called CES and to key them up you have to go one pin down from your normal pinning number. So if it’s a sc keyway like say something easy like 47538 you have to pin it 36427. I honestly don’t know why I’ve always done it that way. Also when you remove the plastic cap on top sometimes they break, so I use the rubber seal from window screens to replace that plastic cap. I carry some with me all the time I shove it in the area where the plastic cap was then I use a razor to cut off the excess off and boom. You have a new cap that won’t come off at all unless you pull it off to rekey it again. GMS profile cylinders are awesome but sometimes won’t fit correctly so I’ve have to grind away a little bit if the metal or aluminum on the door to slide the new lock in. Or the cam is thick and I’ve filed down both sides of the cam so it turns inside the lock/door. Anyways that’s just my two cents! #LockBoss
Man…I have worked on so many of these. The biggest issue I have come across is rusted set screws in chambers 1 and 2 making them such a challenge to rekey. That’s why I keep a bunch on my van. #lockboss
I pin up one chamber at a time and check the key, that way if there is a pin that’s too high/low I am not hunting for the problem chamber or chambers. #LOCKBOSS
They’re pretty simple locks. Some aren’t made to be Rekeyed. They technically can still be Rekeyed but not worth the effort. Tell the customer you can order replacement cylinders that will be rekeyable
@@riplikable they’re a standard rekey if they have the hex screws otherwise I might charge a little more if I had to use a pinning shoe and disassemble. I have the kit from Peterson’s and it makes easy work of it. Maybe takes 5 mins longer than with the hex screws.
I live in a market that has lots of Europeans immigrating some of them have even developed a company that produces multipoint doors that are a hybrid design with north American hardware so these euro profile cylinders are not that surprising the biggest issue I have is finding key supplier and if can they tend to be very pricy to import. #Lockboss challanges
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Great video PJ! I’d personally verify overall length as some storm doors are thicker than others. If a customers door is less than 5 years old the manufacturer may cover replacement of a damaged lock and or damaged hardware if bought through a big box store. The aftermarket profile locks are usually more rekey friendly so good to have in stock. Great to know you carry them! Thanks for sharing! #lockboss
Wish I had heard all this earlier in life! We had bought a house, and didn't even have a key to the storm door-and the lock was an older one without the hex screws. More or less lucky to have managed to get it rekeyed up with the rest of the house, as you suggested, without messing it up! #lockboss
I have rekeyed many of these in various finishes. I like the simplicity and easy keying. Love these as a #Lockboss should!!!
I've dealt with a few of these. This #Lockboss is happy to know that you have them as I require new ones. Thank You PJ.
👊-PJ
Thank you so much you don’t know how helpful you are. I don’t know you at all personally but I feel as if we’re both pretty good friends just because you’ve been teaching me a lot and I’ve been learning a lot. Thank you again my buddy have a great week.🎉
We are friends in my book! -PJ
I see a lot of patio doors with multi-point locks having profile cylinders - good to know GMS has a great offering of keyways & finish options! Thanks, PJ! #AccessLockKeyLLC #HaulinBrass #LockBoss
Great information. Glad to know you have these in stock. Was wondering where to get these. Now I know. Thanks PJ
#Lockboss
I love the comments helping everyone out with the different types and styles. Truly lockbosses. #Lockboss
Thanks for taking the time to do these information videos! #Lockboss
Fantastic video pj ..I have absolutely installed 1000 of storm doors and you are spot on the big orange store will rekey to match your existing key or you can do it your self if I can remember..ya mind is going ..but it's really great to know you stock them ...#lockboss 🏝😎
Good to know GMS make these, I just rekeyed one of these and wondered where I could buy them. #Lockboss
Great information and timely. Just installed a storm door on my house. It is Kwikset. My house is Schlage. Will be ordering one in the near future!!!! #LockBoss.
use them all the time great to know you have them in stock a Lockfather
Great #lockboss video. It's funny I've got one I should change out at home, and this video reminded me to do it. Thanks!
This is very spot on! Before becoming a Locksmith I rekeyed a few dozen KW1 Euro Profile Cylinders in the retail setting, they are really easy! #LockBoss
Nice-PJ
I find these locks very interesting and I was surprised to have ran into them in the field a couple of times. Andy Perrin on the #lockswood UA-cam channel does a lot of work on these in England..great guy, Locksmith and channel! #lockboss
I haven't used any. Of these yet and I don't have any in my buildings. But I found this video was very helpful. Thanks #lockboss.
I have used these often. It is always good to be able to match all the locks on a customer's house so they can use just one key. I usually carry a variety of rim cylinders so I can also match the roll up garage door if there is one. Thanks for the video! #Lockboss
You bet-PJ
Sometimes they can definitely be a pain. Thanks PJ I appreciate you guys!!!! #LOCKBOSS
Thanks for the info, PJ! I haven't encountered a euro-style cylinder yet, but this helps for when I do. I've discovered that when you know how a lock works, you can often figure out the disassembly or install process. #Lockboss
Great video as always!!
One of the very few instances in America where we use profile cylinders. I love those little things though. The old ones make great training locks. #lockboss
Awesome information for any #lockboss I sometimes run into these Euro Profile cylinders and it's great to know there are GMS replacements available in various common US keyways, which apparently are stocked at CLK Supplies. Thanks for the .pdf -- very useful information PJ.
Thanks Ken-PJ
Always great to learn something new, thanks! #Lockboss
Good demo PJ! Thank you for the video and demo! #Lockboss
Good to know you are stocking these. #Lockboss
🤝-PJ
I didn't know GMS made a universal replacement for these.
Good to know. Definitely can use a couple of duranotic finish. Common on storm doors around here for some reason.
#Lockboss
always have a lot of people asking to do screen doors now thank to CLK I can always offer my customer the option to have one key for both doors #lockboss
Awesome, thank you-PJ
The bloopers made my day. Itch itch. #lockboss
Lol-PJ
I like using these aftermarket ones as they are easy to rekey to a customers existing locks so they only need one key. #LockBoss
these can be an adventure at times! #LOCKBOSS
Right!-PJ
Thanks for the info/education PJ. Always appreciate it! #lockboss
🤝-PJ
Great video PJ! #Lockboss
Replacement storm door locks video. Good to see different finishes. James estep locksmith n Tennessee. #lockboss#lockboss
Great #lockboss info
If you are ever trying to identify a screen/storm door Euro profile cylinder that is 23mm inside / 31mm outside, it's for an Andersen Windows door, and replacements are available from them in KW1 and SC1 and in several finishes. They're they only ones who do that size, as far as I know. #lockboss
I had an issue for 1 client where Andersen didn't have a kw1 replacement but it was the French inswing and had a rim cylinder dressed up for the profile mechanism.
Great bit of information on these cylinders. #lockboss
Cool ..... Now I know even more ... Thank you PJ ......#LockBoss
So I got a new house last year and the keys only worked on the front door. So pulled the rest of the locks and rekeyed them all the same. Except the screen door. Researched euro locks only to see they were only rekeyable with special tools. So I just pulled out the Lishi and picked to read the bitting to make a key. Ended up having a issues with the door handle and pull the lock a few weeks after to find the set screws that top each pin chamber. I felt stupid not pulling it before. But keyed it the same as the rest of the house now. Lesson learned. #Lockboss.
Good to know use them quite often in our area #lockboss
I’ve rekeyed some of these in the past. They are easy not much of a challenge. #lockboss
The euro type with the hex screw are also great to practice picking! #lockboss
Great information to know!!! Eastern Oklahoma #LockBoss
not too common here, but there are some and seem to be gaining ground. good to know GMS has them in various keyways. #Lockboss
Good information. I wish I knew this months ago. #lockboss
Hey PJ, you should do more product reviews of your inventory at CLKsupplies. I like buying from there and when I'm unsure on an item a video review makes my decision much easier. #Lockboss
- Daniel
Great suggestion, thank you-PJ
Many of those locks won’t come out the door without pushing on the retainer on the inside side. I use the Kwikset smart reset tool to get inside the small hole to do this. #Lockboss
Excellent video. Does GMS have any plans on offering these in a 10b or 19 finish? #lockboss
great info as always #lockboss
Great video lots of knowledge. #lockboss
I use them all the time. but it is hard to find the right size. the one that works on most storm door is 2 1/8" long with only 3/4 in on thump turn size. and 1in on key side. PJ you may what to bring this up to GMS Thanks #lockboss
Great product for a wide variety of storms doors. #Lockboss
very interesting and very helpful thank you #Lockboss
Awesome 🍭 #lockboss 🐻❄️🍭
I always rekey these one at a time and check the lock with the key.
#Lockboss
Do these fit the 3 point locks #LOCKBOSS
Yes-PJ
Nice Stuff To Help The Customer Spend Money And The Lockboss Make Money #lockboss
Can I order this to fit my new Larson storm door? I asked A local locksmith they have no answers , please tell me what I need ,I can take it to A locksmith.Thanks
If it looks the same, highly possible it will work
Neat. Just curious, even with it being a 5 pin lock, would a 6 pin key (SC4) fit? You forgot to mention Gates, which use these alot as well. #Lockboss. Welcome to the itchy and scratchy Show.
Yes it well, but of couse you can only pin to 5. Lol-PJ
I’ve pinned so many profile cylinders in my locksmith career but not lately though but here’s a little tip for my fellow locksmiths. When rekeying profile cylinders not GMS I think the popular one here in CA are I think a brand called CES and to key them up you have to go one pin down from your normal pinning number. So if it’s a sc keyway like say something easy like 47538 you have to pin it 36427. I honestly don’t know why I’ve always done it that way. Also when you remove the plastic cap on top sometimes they break, so I use the rubber seal from window screens to replace that plastic cap. I carry some with me all the time I shove it in the area where the plastic cap was then I use a razor to cut off the excess off and boom. You have a new cap that won’t come off at all unless you pull it off to rekey it again. GMS profile cylinders are awesome but sometimes won’t fit correctly so I’ve have to grind away a little bit if the metal or aluminum on the door to slide the new lock in. Or the cam is thick and I’ve filed down both sides of the cam so it turns inside the lock/door. Anyways that’s just my two cents! #LockBoss
Thanks for the add-PJ
Good info #lockboss
Missing PDF link...😒
Sorry, it's in the notes section now-PJ
Like the info #lockboss
Good info # lockboss
where's the PDF?
Sorry, it's in the notes section now-PJ
Where is the NOTES section. Please
@@tomcason5399 video description
@@clksupplies I give up.
@@tomcason5399 cdn.shopify.com/s/files/1/0839/9519/files/GMS_Profile_Catalog_PDF_d9285c94-2782-4058-a208-244d3a1eaa5b.pdf?v=1653006384
First
Pdf??? #Lockboss
Sorry, it's in the notes section now-PJ
Good to know, thanks.#Lockboss
Man…I have worked on so many of these. The biggest issue I have come across is rusted set screws in chambers 1 and 2 making them such a challenge to rekey. That’s why I keep a bunch on my van. #lockboss
Good info, thx-PJ
Damn it Wayne...#Lockboss
I pin up one chamber at a time and check the key, that way if there is a pin that’s too high/low I am not hunting for the problem chamber or chambers. #LOCKBOSS
Nice!-PJ
For some reason, my boss won't touch profile cylinder locks. Maybe I can point out these as an option. #Lockboss
They’re pretty simple locks. Some aren’t made to be Rekeyed. They technically can still be Rekeyed but not worth the effort. Tell the customer you can order replacement cylinders that will be rekeyable
There’s plenty of vids out there on how to do the rekeys. I did a vid awhile back on the variations and special tools.
Yeah, I rekeyed a few before he found out. They all had the hex screws. He says they take too long to rekey for normal rates.
He also doesn't trust that the mechanism won't fail during our service.
@@riplikable they’re a standard rekey if they have the hex screws otherwise I might charge a little more if I had to use a pinning shoe and disassemble. I have the kit from Peterson’s and it makes easy work of it. Maybe takes 5 mins longer than with the hex screws.
I live in a market that has lots of Europeans immigrating some of them have even developed a company that produces multipoint doors that are a hybrid design with north American hardware so these euro profile cylinders are not that surprising the biggest issue I have is finding key supplier and if can they tend to be very pricy to import. #Lockboss challanges
I Hear Of Profile Cylinders. I Know You Can Rekey Them To A Key You Want To. Make Life Easy One Key To Door Lock & Profile Cylinder. #lockboss
2nd , but I don't care , I'm a #Lockboss, ;)
Have a great day!!!!
Who knew? Not this guy. Hope that doesn't make me any less of a #lockboss 🤔
That’s a fix Cam euro.