You definetly should turn the ignition on when you replaced the pump cause of screen cleaning while refilling. Did this as well and 50ml more went into the Haldex...
Hi just gonna give some info that might help some people. My haldex stopped working so I did this in the video and still didn't work so I replaced the pump and it still didn't work I then took it to a vw specialist who updated the software on the haldex controlle module still didn't work it turned out that the control module was broken but still acted like it was OK. It would communicate fine perform output test and no codes would show hope this helps people looking as I had a nightmare with mine.
2016 Audi A3 owner here. The previous owner of the vehicle that I have now didn't keep up with the maintenance of the fluid for the Haldex. Cost me $174 (CAD) plus $96 (CAD) for the Haldex Fluid to replace the damn thing.
I will give it a thumbs up but it would be helpful to see what the plug connector looked like so I know how to get it off what type of plug and also don’t you start the car run it get it warm and then check the fluid and probably add more
Does my B5 A4 2.8 Quattro have this as well? I changed my trans filter and fluid, and im getting ready to drain and fill the differentials. Do I also have this pump too?
Hello guys What difference is between 0CQ525010F and 0CQ525010K? Because my "F" has broke down and i bought "K"... Now and I'd like to know will it work ? :P I hope F and K is the same haldex... Of course K i newest. My AUDI a3 8v 2.0 TDI 2014 Sporback. 170kkm
feel free to email your VIN to sales@jhmotorsports.com & let us know what part you are looking for. We can check what the most revised part number is specific to your VIN.
The cost of the repair will vary on the shops labor rate. Generally this job should be under 2 hours of labor & OEM Halex pump we offer is currently $152.96 jhmotorsports.com/haldex-pump-oem-for-mqb-8v-mk7-1-8t-2-0t-2-5t.html
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You definetly should turn the ignition on when you replaced the pump cause of screen cleaning while refilling. Did this as well and 50ml more went into the Haldex...
On Volvo, they say drive 5-10 minutes to really circulate all the oil through all the plates and system.
Sharan II gen 4 haldex, replaced filter, cleaned pump, after ignition on for 2 mins I was able to add extra 90ml
Hi just gonna give some info that might help some people. My haldex stopped working so I did this in the video and still didn't work so I replaced the pump and it still didn't work I then took it to a vw specialist who updated the software on the haldex controlle module still didn't work it turned out that the control module was broken but still acted like it was OK. It would communicate fine perform output test and no codes would show hope this helps people looking as I had a nightmare with mine.
Jamie Ellerington I think I’m going through a similar nightmare.
Did you end up getting a rear differential?
2016 Audi A3 owner here. The previous owner of the vehicle that I have now didn't keep up with the maintenance of the fluid for the Haldex. Cost me $174 (CAD) plus $96 (CAD) for the Haldex Fluid to replace the damn thing.
I will give it a thumbs up but it would be helpful to see what the plug connector looked like so I know how to get it off what type of plug and also don’t you start the car run it get it warm and then check the fluid and probably add more
Great video!
Should always prime the pump by running engine for 30 secs then top up...
Do you know what gen haldex this is? I need to replace the motor on my 2010 TT which has Gen 4 - hopefully it's as easy as this!
This is a gen 5 haldex.
First. Thank a guys!!
No problem!
Does my B5 A4 2.8 Quattro have this as well? I changed my trans filter and fluid, and im getting ready to drain and fill the differentials. Do I also have this pump too?
Fox Mulder no, you have a torsen differential
Heii I have S3 8v 2014 and i have problem with AWD only the front tiers run, I will be happy if tou can help me with that...
we would be more than happy to assist, send an email to sales@jhmotorsports.com and our tech support can help.
Нажмите на фрагмент, чтобы вставить его в текстовое поле.
Hello guys
What difference is between 0CQ525010F and 0CQ525010K? Because my "F" has broke down and
i bought "K"... Now and I'd like to know will it work
? :P
I hope F and K is the same haldex... Of course K i newest.
My AUDI a3 8v 2.0 TDI 2014 Sporback. 170kkm
feel free to email your VIN to sales@jhmotorsports.com & let us know what part you are looking for. We can check what the most revised part number is specific to your VIN.
@@JHMotorsportsInc spierdalaj.
So how much should a job like that cost
The cost of the repair will vary on the shops labor rate. Generally this job should be under 2 hours of labor & OEM Halex pump we offer is currently $152.96 jhmotorsports.com/haldex-pump-oem-for-mqb-8v-mk7-1-8t-2-0t-2-5t.html