GM HOLDEN 304 V8 ENGINE RE-BUILD [EP1]
Вставка
- Опубліковано 12 сер 2019
- Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfactory.com
Today on The Skid Factory We're kicking off a new build series starting with this 1997 Holden 304 V8 Engine.
The Engine was purchased off Facebook and without knowing the history, Al strips it down to assess the block and cylinder bores for wear.
Don't forget to subscribe and hit the bell for Weekly episodes.
Like these new tunes? Download them here!
/ munro_music
open.spotify.com/artist/3ICX3...
/ heights-single
For updates keep your eye on The Skid Factory (TSF) here:
Facebook Page: / theskidfactory
Instagram: / theskidfactory
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. - Авто та транспорт
![GM HOLDEN 304 V8 ENGINE RE-BUILD [EP2]](http://i.ytimg.com/vi/gg9kjjJPg1w/mqdefault.jpg)
![GM HOLDEN 304 V8 ENGINE RE-BUILD [EP2]](/img/tr.png)
![GM HOLDEN 304 V8 ENGINE RE-BUILD [EP3]](http://i.ytimg.com/vi/56YzPeigvns/mqdefault.jpg)
Al -“I’m not an expert on Holden V8s”, proceeds to explain in intricate detail every GM V8 made in Australia!
Well at least he covered his arse just in case he made a mistake.
What an absolute weapon 💪
One trick is to tell 'em stories that don't go anywhere - like the time I caught the ferry over to Shelbyville. I needed a new heel for my shoe, so, I decided to go to Morganville, which is what they called Shelbyville in those days. So I tied an onion to my belt, which was the style at the time. Now, to take the ferry cost a nickel, and in those days, nickels had pictures of bumblebees on 'em. Give me five bees for a quarter, you'd say.
Now where were we? Oh yeah: the important thing was I had an onion on my belt, which was the style at the time. They didn't have white onions because of the war. The only thing you could get was those big yellow ones...
polishdiapersale most obscure simpsons reference I’ve seen in awhile, kudos to you sir!
Those were the days...not like Gen X Hamsters sipping Lattes.......
@@ReignitedAuto I knew this sounded familiar.
Now my story begins in Nineteen-dickety-two. We had to say "dickety" because the Kaiser had stolen the wold "twenty". I chased that rascal to get it back, but gave up after dickety-six miles.
As an American I’ve no idea what’s being said but I’m laughing and enjoying all the fun slang/words while clapping!
So good to watch, my boyfriend has a 5L VS and I want to help him do a full engine rebuild to thank him for all the amazing things he does, and this has really helped. :)
The bag labeled "bolts" had me rolling
Descriptive!
It's a good job Al labelled the ziplock bag, otherwise he'd be scratching his head for hours during reassembly wondering what they were. S'pose he could always google it 💭
He forgot his nuts too never forget the nuts 😂
Slick with the 8 ball this time! I enjoy its random appearances!
To early, I never watch past the discovery of the ball
3:32 looks like a can a xxxx gold in the motor too, xxxx gold and a 8 ball you can’t go wrong haha.
@@noeleenbatchelor3736 nah mate good ole lemon squash
I was like wtf is that🤔🤔
Feel like i just got schooled for 28 mins! What an Ep, so good mate!
Same. Epic learning. Thanks Al!
I don't know it all but I am happy to chat about what I do know. Thanks for watching.
"Onions on our belts". love the Simpson's reference.
Did you see the Simpsons flag in the background of the whole episode.
It was the style at the time. You could only get yellow onions! Because of the war.
One of the best sounding V8s ever sold here.
Forced induction is an irrelevant question, Al is not known as "naturally aspirated yoda"
Turbskies tend to go well with a Holden 5 litre too, 14 psi is not uncommon for these things to happily handle
@@HotForgeChaos absolutely right mate, I was sarcastically eluding to the fact that "turbo yoda" is not an n/a kinda guy.....
He engraved a turbo on the connectong rod...
Forced induction is awesome but it's also great to check out the Naturally Aspirated side of life too and see how it goes.
@@theskidfactory too much lemon squash tonight mate 🤔🤔😉🍻
Who dropped their guts at 19:23 before the transition lol
It's the little things that make ya smile....
I come into the comments just to see this comment 😂
a really moist one hahah !
HAHA
Not just me so 😂😂😂
I'm going to say that is the best episode you have ever done! The first fifteen minutes, pure history, and Al shining more and more with passion. I really enjoy hearing about all the odd quirks, silly decisions and fascinating past that makes a engine what it is today, or what it was then. Thanks so much for producing content that makes me proud to be an Australian. Great spit too Al.
Cracked open a VB tallie and put my mullet wig on for this one 🤟🏼
I all so cracked open a VB tallie and I didn't put a mullet wig on tho...🍻👍😎...Why...Because I've got a mullet...😂👌...
My old man calls tallies King Browns lol
I call them VB long necks...👍🍻...Cheers Bra...
Victorian
Breakfast
busted your a ford owner us gm boys can grow our own
*sees Al leaning over a V8
Me: Aww yeah, bring on the twin turbo!
Al: Nothin's off the table
:>
Darthane hahahahaha nothing was ever on the table unless he’s tryna cram air onto that too😂
Was 5044, went to 4987cc. This is the modern equivalent of ancient story telling. Passing down the ancient knowledge to the younger generations.
Had one of these, XX3 (195kw). Wasn't massively strong, but was very smooth and with a manual was reasonably efficient. Good cruiser. The problem with a power number alone is that it doesn't always account for drivability. Power, Torque, rev numbers each is achieved at and the vehicle and driveline used are all contributors.
Love this engine archaeology Al. You are a wealth of knowledge. Thanks for sharing.
Al: talks for 25 minutes unscripted about the history and geneology of Holden V8s
Also Al: But i don't know much about them, just a vague interest.
LOL!
@@robmatthewswoodturning4988 And manages to be seriously funny. Just the best channel ever.
I'm amazed of how much knowledge and experience he has, until today I thought he basically messed around with japanese stuff, turns out he knows a shit ton of stuff regarding EVERYTHING.
Yeah we got Holden V8s down here in Tassie ... and yes they usually end up in the bushes !
Straight 6's seem to be the thing ....... they still end up in bushes.
But the difference was how far did the car get wrapped around the tree.
A 304, an 8 ball, and a Simpsons reference. Spoiling us today Al.
Playwme Surname and a xxxx
I mean he’s spoiling everyone with this project of his it’s like mind games with this shit haha I think he’s tryna throw me off from the main focus of this 😂
Best sounding engine ever put in a car. So happy with this already.
It’s a shame all those noise is heard screaming up the street but the cars generally don’t go anywhere fast. Great sound with zero actual go. I’ve owned them too
@@agga3955 yeh, designed for maximum time for hearing them drive by
@@agga3955 who cares there's always something faster. Not many engines are as reliable though.
@@agga3955 uve owned clapped out shit boxes then.mine goes quite nice thank you very much
90% of them make a lot of noise and go nowhere. The rest have some decent money sunk in them 😂
Watching them take the bearings out makes me want to cry. This engine with supposedly 190k looks brand new compared to mine with around 120k. My bearings were so worn that the copper was showing on nearly every crank/piston bearing. I don't even want to think about what the cam will look like when I take the top end apart. SERVICE YOUR ENGINES PEOPLE!!!
"And if i didn't say in inches, no one would know what I was talking about." I wish you knew how much I love you lol
Interesting history of this motor and dear Peter Brock's input to a 304 motor. Nice one.
Methinks the "8 ball " 🎱 is looking for "10 mm" sockets!.
We need a 10 mm socket emoji ?
Looking forward to much Aussie V 8 Ness. Thanks for sharing.
Al's commentary is informative and entertaining. As an american, I find the Australian mannerisms very entertaining
There's something so satisfying about hearing bolts crack loose.
Cant wait to see what this goes in.
Could listen to Al talk about engines and just stuff for hours
Holden engine archaeology class, love it! I was always a crossflow boy, but this is still riveting
You can just see the hope on Al's face, waiting for Woody to ask if he wore brown or red onions on his belt... but alas, nothin'.
Loving the eight ball surprises. Alan's knowledge on engines is outstanding. I learn something every time I watch these videos.
Yeah the skid factory 🏭 Aussie 5L for the win !!
Adam Ridley the Aussie Ford 5.0L was legendary as well. Way before the coyote and after the Windsor.
@@alexcorona WTF! The Windsor was used through to the AU then they went to the mod motor in the BA. When did Ford Australia design a 5.0L of their own!
Ford Built the 302 (5ltr) Cleveland in Australia cast here heads redesigned here , 6 inch rods , crank 3.0 inch. Sure was based on American Cleveland but now USA wants Aussie Cleveland's cause better heads and block.
@@joeycowen7929 lmao nobody in USA wants 30 year old shitty engine parts.What information have you based your comment off? Lmfao
Really enjoyed learning the 304 history 👍.
Don't forget to Subscribe and follow us on Social Media!
ua-cam.com/users/theskidfactory
www.patreon.com/theskidfactory
facebook.com/theskidfactory
instagram.com/theskidfactory
The Skid Factory love from mexico 🇲🇽❤️🇲🇽❤️🇲🇽
From what i can see they look like aftermarket pistons has i have almost the same but in a flat top. ACL are quite a good budget piston
Subbed from the go
hey throw that engine in my ute lol
Something soothing about an engine rebuild
So good to see old school and all the good info. Can't wait to see the turbo on this.
What a complete fountain of knowledge you are Al...bloody amazing
Always love the history lessons included in a teardown
Love the history lessons, you're real good at explaining things
Yes! Finally back on a motor I know, stoked to see some GM stuff from you guys
One of the best channels on UA-cam
Another awesome video - thanks guys! Loved the history lesson with the 304 too.
A truck load of technical info, thanks for everything you do :)
Story time with Al.. loved every minute of it 👌🏻
YESS I AM WATCHING EVERY EPISODE AS ITS RELEASED I LOVE THESE ENGINES SO MUCH
Excellent info with the story of these engines, one of my favourite V8's
Can't wait to hear it run
Love the commentary Turbo Yoda! Very knowledgeable and just pleasant to listen too
Hell yes boys! My first car was a 304 VP Wagon. Stoked on this one.
Thanks guys, Looking forward to this one
i have waited so long for an in depth video on this engine what a great engine builder an person awsum work guys kep it up
Excellent, this is what I've been waiting for.
Very educational thanks for the info I didn't know anything about those engines as an American . Please keep up the great work
Good on ya mate for all ur information and experience
Thanks for the 304 history lesson!
wow guys... stepping up your audio game wit this video - great continuity and general awesomeness!
Unreal video guys..best I’ve seen well done
Great video. Always informative.
And the best history lesson I’ve had in 40 years.
Excellent video lads keep up the good work
Holy shit Al, the knowledge you have is absolutely second to none. Crazy background and passion on everything on the skid factory
one of my favourite sounding engines
love how the 🎱 keeps making an appearance!
This is so cool! Would Love to see more engine teardowns/ Australian motoring history lessons.
Finally a good sounding v8 on the channel
Thank you so much for this I love the Holden V8, my favourite engine.
Driven 304’s as daily’s for many years and have a n/a 355 in the build for my VN Calais.
Currently working on my VR statesman and you sir are a god send
Wish I could like multiple times. Also love the additional video at the end of your episodes. Keep up the great work. Also I’m a mechanic 25k north of Brissy. I dont get to do the kinds of things you guys are doing. Makes watching your videos very interesting and informative thank you guys
Awesome video keen on watching how this build goes
This was the perfect love letter to the Holden V8. To my mind, you showed the engine and what it represented just as much love as it deserved - and not an ounce more 😂
Thanks Al that was very educational
You're onto it with the splayed 4 bolt main caps Al, Steve Morris agrees with you on that and I think he knows a thing or 2 about big strength, high horsepower engine design 👌
I have a couple of VS generation 304s and an old blue 253 sitting in my shed at the moment 🤣
Its good to see u build more v8s on this chennel
Love it when Al gives the detailed history and knowledge. Cool to learn over here in the states. Now put two hair dryers on it.
Great video enjoyed the history lesson !!
Hey lads love the show killa as legends wat dreams are made of
Very interesting and informative thanks for your time and effort.
Love the content boys 👍🏼 keep up the awesome work.
i always look forward to a new build.
Great video TSF!
Going old school! Love it!
Great Stuff
You're the man, Turbo Yoda.
Looks clean!!!!!!!!!
Awesome work @skidfactory this brought back a lot of great memories pulling all nighters helping rebuild a mates 308 which ended up in my hands after he decided to sell his car. I eventually decided to stick this injection head and manifold combo on my VB commodore as they fitted that HQ red block, i still remember the engine number, it was a great little combo that I still miss today
Love the Aussie stuff. Makes me fell old but.
I could listen to this bloke all day>
i knew nothing about Holden 304's before this. Thanks!
Jared Farney aaaand if you believe this guys dribble you still won’t sir😉
BRILLIANT!!! I'm about to build a 304, first ever attempt at building an engine! A box of lemon squash comin to ya after i finish 💪😎
MCM and Skid factory number 8 & 9 on trending, well done lads 👊🏻
Except only one is worthy of that. Skid Factory is the only good thing to come out of MCM. No childish sex jokes or weird tangents; just knowledge and thorough builds.
The venerable Holden V8! I actually miss mine after watching this.
Like this post for Al and Woody to build a 355 stroker outta this!
Aww HELL yea - an old school[based] pushrod V8!!! Gettin' that modern Haltech treatment!
I'm looking forward to this!
A hard day at work is rewarded with a lemon squash and Skid Factory. Aw yiss.
Very cool as always, had a VR with 304 , first engine didnt get real tired til it had over 500000 ks on it. Good old things!
great! I like old motor rebuilds :)
We had one of these at Tafe we pulled apart in our Cert 2 course, nice simple motors to work on!
😂😂😂😂😂😂 The can and the 8 ball :D Amazing the engine ever ran at all. Ahhhh I found that too funny.
I'm very confused by this engine but learned alot gonna have to research these further.
Very informative. I learnt a lot. I have always had Holden V8's. I even had a blueprinted VK 5 liter which ran like a Swiss watch. My favourite.
Totally agree on that one ! I had a mate in the 80's who had a VK with a fully balanced 304 - @ 60 km/h in first gear it was like a sewing-machine - SO SMOOTH !!!
Thanks for sharing your passion and knowledge about this engine Al. I own a 94VR CLUBSPORT 5Ltr my pride and joy for 5year's now and planning to keep it for ever, it sounds awesome and man she's pretty quick. Great video Al, it inspiring me how to look after my baby lol. Cheers bro. From Aotearoa NZ
Good stuff!
Have a vp bt1 after owning a few ls’s the 5 litre sounds so much nicer!