it looks correct to me! In the beginning shots, it's correct, but later in the video I see what youre saying. It is incorrect 1/2 way through when you are pulling the guard off the carbon frame.
Thanks for this. I've decided to upgrade my Mob8 w/O3 to the Pavo25 v2. I'll move the O3 and retire the Mob8. The Mob8 really isn't strong enough to carry an O3 especially if there is much wind, but it was fun for my first quad. I got a lot of great hours with it.
GREAT review Gal. Do you know if the frame will accommodate a 30X30 FC or 20X20 FC? I'm thinking about building my own with 1507 motors and chopping 3" props down to size...
@@KremerFPV I already figured it out but now I’m trying to make the osd work on my goggles 2 and I would appreciate your help with that. I’m confused what needs to be done in beta flight
@@mazivco easiest option is to use the DJI O3 preset (under presets tab on BF). You need to select the UART that is connected to the O3 unit. Make sure that RX is wired to TX from thr O3 unit to the FC (And vice versa).
Please note that I installed the propellers guard upside down by mistake. Happy flying!
it looks correct to me! In the beginning shots, it's correct, but later in the video I see what youre saying. It is incorrect 1/2 way through when you are pulling the guard off the carbon frame.
@@WEEBER13 Yes I made a mistake when putting it back the last time :-)
Awesome flying and review, Gal! 😃
Really nice little quad!
Stay safe there with your family! 🖖😊
Thanks Mario!
Thanks for this. I've decided to upgrade my Mob8 w/O3 to the Pavo25 v2. I'll move the O3 and retire the Mob8. The Mob8 really isn't strong enough to carry an O3 especially if there is much wind, but it was fun for my first quad. I got a lot of great hours with it.
Looks great. Thanks for sharing, Gal 🙏
My pleasure!
Omg.. it is so good quad... 👍👍👍
Lucky you 👏👏
Muito bom e melhor do que a Aurora 90
Yes indeed :-)
best whoop for 4s batery
Nice review. Did you see any jellowing? Although the dampening seesm stiff, I did not see any jellowing in your video. Or did I miss it?
Thanks. Flight footage was quite smooth actually.
How does this compare to the Flywoo Flylens85? I'm on the fence between the 2.
Is this drone capable of carrying a full size gopro camera and djio o3 system for indoor filming? Thanks for the video!
Yes it might be possible but it will be too heavy. I recommend going for a naked GoPro or similar.
your prop guards are installed upside down.... hehe
GREAT review Gal. Do you know if the frame will accommodate a 30X30 FC or 20X20 FC? I'm thinking about building my own with 1507 motors and chopping 3" props down to size...
Thank you! It supports 16,20 and 25mm stacks.
Thanks, @@KremerFPV !! Really appreciate your reply! I was thinking about maybe sticking a DJI Vista in there, if it fit!
@@WEEBER13 no worries. Sure, it will fit :-)
los ductos no estan el revez?
I wondered the same thing! @jonatancruz3238
@@WEEBER13 yes, I made a mistake :-)
Where did you purchase the data cable device and the 90 degree micro usb device. I’m having to take my motor off to connect my data cable.
You need a USB-C extension cable such as this one: s.click.aliexpress.com/e/_ol6bVdm
Hello Gal. Which extension specific? I saw in the video U had a blue one not flexible? Thank you.
@@panosfpv Hi, I don’t have a link to the specific version that I have. The TYPE-C version from the link above should work.
the prop guards looks weird, and found that you install the prop guards in wrong side Gal 😃
Yes, my bad :-)
I just configured the Pavo and couldn’t figure out how to turn off the led
Do you still need help with that?
@@KremerFPV I already figured it out but now I’m trying to make the osd work on my goggles 2 and I would appreciate your help with that. I’m confused what needs to be done in beta flight
@@mazivco easiest option is to use the DJI O3 preset (under presets tab on BF). You need to select the UART that is connected to the O3 unit. Make sure that RX is wired to TX from thr O3 unit to the FC (And vice versa).
@@KremerFPV I’m gonna try that, thanks
BWhoop Duct roll ???
The frame was assembled upside down.
Yes - my bad.
Hello Kremerfpv
👋