Bro mene YMFC-AL wala flight controller bnaya pr jab mene drone ka flight test kiya to arm krte hi drone right side se apne aap utne lagte hai or jab fly krne ki koshish ki to vo balance nahi ho rha tha or crash ho gya samajh nahi arha issue kha pr hai please help
if i build a mini drone follwing this, is it enough for decent performance? as i want it to be cheap. also what is the difference if i use esp32 or arduino nano for the brain thanks, lots of love
hi everything works fine but after sometime my gyro gets reversed like the 3d model in the inav rotates on the opposite direction of my drone after flashing the firmware again it works but switches again
10:39 bhai ye firmware flash ka part ek bar aur samjha do pleasee.... Esp 32 plugin karne ke baad firmware flash karna he ya fir just jaisa he waisa he firmware flash ka button pe click karna he....?
Ye esp 32 pe work nahi karega only stm32 f411 is board pe karega…. Aur aap without stm32 plugin karke bhi kar sakte ho firmware load aur baki sab same hai
In here we use stm32f411 ceu6 board which is used for flight controller, this board is specially used in rc flight controller When you make a drone 1 microcontroller can’t handle 2 programs at a time actually it handle but we make drone so the all parameters need to be accurate so we attached many sensors like GPS, Telemetry, Sonar, led, gyroscope, magnetometer, accelerometer so there is no port remains for our receiver thats why we used 2 different microcontroller
Agar mere apke pass flysky vagre ka receiver hai to usme chalega lekin apne khudse banaya hai to nahi kyu ki wo pwm hai iseliye meri video dekho recently mene 14 channel ka banaya hai wo chalega
i have facing some problem . can you plz help by communicating each other . my FC does not connect . FC can not find Com port (FC= Flight Controller) help plz.........
Joined Telegram Channel For Your doubts And Upcoming Updates Regarding Drone Build - t.me/harshdhanawade16
bhai telegram to join kar lia par tumse baat kaise karu ?? message likhne ka option e nehi aa raha🥲
Bro mene YMFC-AL wala flight controller bnaya pr jab mene drone ka flight test kiya to arm krte hi drone right side se apne aap utne lagte hai or jab fly krne ki koshish ki to vo balance nahi ho rha tha or crash ho gya samajh nahi arha issue kha pr hai please help
Waiting for second partt 🥰
🎉 Really professional bhai. Keep it up
Thank you so much 😀
if i build a mini drone follwing this, is it enough for decent performance? as i want it to be cheap. also what is the difference if i use esp32 or arduino nano for the brain
thanks, lots of love
your content is very good brother but try to make the things compact and small
hi everything works fine but after sometime my gyro gets reversed like the 3d model in the inav rotates on the opposite direction of my drone after flashing the firmware again it works but switches again
10:39 bhai ye firmware flash ka part ek bar aur samjha do pleasee.... Esp 32 plugin karne ke baad firmware flash karna he ya fir just jaisa he waisa he firmware flash ka button pe click karna he....?
Ye esp 32 pe work nahi karega only stm32 f411 is board pe karega…. Aur aap without stm32 plugin karke bhi kar sakte ho firmware load aur baki sab same hai
@@Harsh_Dhanawade sorry sorry typing mistake stm 32 ke jaga esp 32 likh dia galti se....
@@Harsh_Dhanawade bhai flight controller ka total cost kya hai ??
Broo...... I have flysky ct6b transmitter, so how can i connect reciver with this flight controller
Bro can't we use just one STM32 for both receiver and flight controller ?
No brother it’s not possible
@@Harsh_Dhanawade bro can you please explain why ?
@@Harsh_Dhanawade Bro please explain 🥹 .
In here we use stm32f411 ceu6 board which is used for flight controller, this board is specially used in rc flight controller
When you make a drone 1 microcontroller can’t handle 2 programs at a time actually it handle but we make drone so the all parameters need to be accurate so we attached many sensors like GPS, Telemetry, Sonar, led, gyroscope, magnetometer, accelerometer so there is no port remains for our receiver thats why we used 2 different microcontroller
@@Harsh_Dhanawade Thanks ft explaining ❤️😍 .
Cover your barometer because it is light sensitive
Does it work with stm32f103, thank you very much
No Bro
can you please make a video on getting starterd with stm32F411CEU6
In this we can use 8 channel transmitter and receiver 😊😊
Yes you can you but remember your receiver has ppm,sbus or ibus signal pwn signal is not working
@@Harsh_Dhanawade means
Check your receiver output it support PWM output or PPM output? If ppm output is not support then it’s not work
@@Harsh_Dhanawade Matlab ki woh 8 channel wale Rishi var main humne Jo banaya jisne kya tower channel, banayathi NRF Modi Kesha PMM orPWM ka Matlab
Agar mere apke pass flysky vagre ka receiver hai to usme chalega lekin apne khudse banaya hai to nahi kyu ki wo pwm hai iseliye meri video dekho recently mene 14 channel ka banaya hai wo chalega
Bhai humko up ka sate contrake karna hai kaisa kar sakta hou
Ye mere telegram ka link hai -
t.me/harshdhanawade
will this run in STM 32 blue pin?
No it’s only work with stm32 f411ceu6 black pill board
Bhai tumne tho receive pwm banaya hae na ppm ka kab banawoge?
Pehele mene pwm banaya tha jo ki 8 channel ka tha abhi recents video dekho mene 14 channel ka banaya hai wo sbus support karta hai
@@Harsh_Dhanawade thanks bhai much helpful ❣️
Sir meta stm32 inav se connect nhi ho rha com port show nhi ho rha
Follow proper steps
Same issue
Now everything working in my drone..... But it can't fly stable..... Can you share the pid value of your drone
I don’t recommend for my pid values please tray calibrate later or maintain drone weight in centre position
Battery kitna voltage aur mah ka hae?
3s 2200mah 12.60v
Up mobill sa isko cooding karka dhakoy
Kar sakte hai uske liye apko playstore se speedybee application download karna padega
Whats the PID values
Default PID
i have facing some problem . can you plz help by communicating each other .
my FC does not connect . FC can not find Com port (FC= Flight Controller)
help plz.........
Which flight controller you made ? It’s stm32 f411 microcontroller you use ?
@@Harsh_Dhanawade yes , it is and if possible can you email your personal Instagram id or messenger id or what's app id ... for help..🙏
and also vcp driver can not download by their main website . i try a lot. but i fail .if do you have this , can you share the file by google drive..🙏
chat.whatsapp.com/LBtR2jHFGa639sJrWaMkYD
You stole ymfc3d code didn't you?😅
can i use ppm input i have flysky transmitter and reciver??? what changes should i make to use ppm
Yessss, just select ppm protocol in inav
Can i make this for my rc plane f,22 raptor
Yes you can make rc planes and drone also