who else was nodding their head when he mentioned boiling water ...... pressed plastics have a memory , so boiling water would almost certainly spring it back to its pressed state good fix....
@@solveit1304 I would start with a slightly lower temp like 60-80C though. I found that some plastics actually start to quickly deform and almost 'melt' at 100C.
I absolutely love these videos,i like to watch them in the morning before school so i can wake up my brain and feel ready to learn Love the channel please keep it up Love from SA
Vince this video was so useful, not only did you explain how to fix the stick problem but you also explained why every time I try to screw a joycon back together the screws thread! screw left until it clicks, thank you!
When I opened mine, I was upset to find that the peg that holds the thumbstick down had snapped and got stuck inside, however, there was a small hole inside of this that I was able to stick a cut paperclip with some superglue on to fix it, it's working perfectly now. Thanks for showing how to take it apart!
thanks i was trying to figure out how easy it was to fix my dewseign labs controller as the corner of lower outer rubber part by the trigger was knocked loose. you showed me how easy it was and got me over the notion I might break it more
Just downloading your video to watch in the dentists. They don't have WiFi or 4G access for some reason so you get the honor of entertaining me today! (gonna download another of yours as I don't think an 8 minute video will be long enough for their waiting room haha).
HELPFUL: You can literally pull the analog sticks straight out of their slots if you don't have access to a screwdriver/can't open the controller. I was literally able to flex the plastic and replace it all without opening the controller. Saved me $60.
Turn screw anti clockwise until you hear a click then the screw won't strip and will follow the same path in, awesome tip, I stripped many screws u til I learned that gem! Liking vid
There are thermold plastics and thermoset plastics. One will retain a shape memory and can be coaxed back into shape by heating. Some take a permanent plastic deformation when heated. Can't remember which.
And to answer my own question (thanks google) this is likely a thermoset plastic. They are more rigid and not remoldable. Hence heating can reduce stress and return to it's set shape. Something like ABS can be remelted or reshaped with heat and has a less stable form but more flexibility.
My friend. Just pop out the loose joystick, and hold it hard to make an oval put I let back on the stick and use like a kitchen knife thats not sharp and push the stick forward as you fit the joystick over it and it will recenter it
Nice one! PS. The Screwing technics are the same for all bolts nuts and screews! Allways start to unscreew (be awear at left hand threads still used at todays cars) and then when you know start tightneing. day after the day i do tyre change from winter to summer tyres at customers cars ther at least one bolt/nut that has 2 or 3 threads. Nutgun can handel it but its nut ok after while...
Great fix vince great idea with the hot water i would have never thought of that your incredibly skilled and you inspire me alot keep up the amazing work
Hello there, thanks to your content my dialysis of 4 hours every second day flew by. Especially i like the Tea Break Fix, quick and straight to the point. You are saving the enviroment from becoming landfills. Keep up the great work! Greetings from a phone technician.
Hey Vince, Lovely video as always. Do you sell many of the products you fix and if so do you have an ebay shop? I'm sure a lot of your subscribers would buy with confidence if you list products. All the best to you and your family, Pete
I don't Pete, they might get filmed in other 'how to' videos, used by myself or sometimes given away to family/friends 👍 I do need to have a sort out at some stage as the house is getting taken over!
Hi Vince. Great video. I have one which looked the same as this but the analog stick is actually broken. You said could be a 10 min fix but looks like I will have to remove the bottom panel, remove both boards and replace the whole analog mechanism from the board and solder a replacement. Is there an easy fix??
Thanks CLC. The lights behind the monitor are built into it from the manufacturer BUT the lights around the desk were the same ones from the LED light strip video I did a few months ago. Let me know if you can't find it and I will post a link. They were the cheap ones from Amazon, still working fine though 👍 I did an Amazon affiliate link in the description of that video 😁
This video was very helpful my son broke his left joystick and didn't know what he did to it. But this video showed how to fix it I would definitely like and subscribe it
I have a question where did you get the screwdriver I’ve been looking all over my house and I can’t find a screwdriver that small and if you would tell me it would really help
It’s a security screw you can get them off Amazon you could strip the little indent in middle so you just use a regular torque screw driver which is what I did but it won’t always come out the way you’d like
Lovely video, this boiling water trick is perfect! Vince, how about trying to fix video about sawing machine? I recently oiled my girlfriend machine for the first time and boy, this is super clever pure mechanic machine. I think you will love it! Also sounds like interesting video and women will watch it later for constant view increase :)
You’ve helped me fix my controller, but I have another controller that sticks when playing. It’ll zoom through the menu or character will walk on their own when playing. Not broken, but sticky. Would cleaning it fix that or is there a deeper issue needing fixed?
Hey Vince, do you do a teabreak intro for every item? It seems like you'll never know if something will take 10min or 10hrs to fix before you open it to investigate.
Hey 😁 I don't. Sometimes I get caught out on a harder fix, but on those ones I can edit the hell out of them to get the time down. So the gyro ball 'tea break fix' actually should have been a 'trying to fix' as it took a while, but with editing it worked out ok 👍👍
Fantastic! Had a controller with a slightly weird stick and aside from snapping one of the clips on the hand part of the controller, it was incredibly easy and works like a dream!
Vince, do you accept people sending in a broken device repairing it and returning it to the sender? Obviously they’d pay you to do so. But do you do this just wondering or do you always keep the device?
Shape-memory polymers (SMPs) are polymeric smart materials that have the ability to return from a deformed state (temporary shape) to their original (permanent) shape induced by an external stimulus (trigger), such as temperature change. I googled it, had no idea myself so I've learned something here that may come in handy.
so i have a problem with my controller, the problem is in the right joystick top where it can move, theres a slight problem because you can easily move it a bit with a slight touch, while the left joystick takes a little bit more pressure for it to move. and also when i try to "pop" it out (when you lift the joystick up and it makes that pop sound) it doesnt make any noise as the left joystick. is there a problem with the joystick itself or underneath the top joystick? because im not sure if i need to replace the bottom joystick or not and i never soldered or desoldered anything in my young life, most likely from my rage problem but im weak so its not as bad.
How in the world do you find a listing like this and there's not some hidden problem that requires lots of time and/or money to fix. That's a good skill to have, finding easy-fix ebay listings.
When the plastic piece of analog stick is taken off the joystick underneath, are the joysticks still supposed to stick to the top/bottom/sides? I removed the analog plastic piece and the joystick underneath is sticking but in the video you showed the same..
Yeah nice fix. ^^ reminds me of my mask reshaping procedure where I put a mask into the oven which is forced into a certain shape and cool it off with cold water so it keeps the shape on its own. Also somebody please explain to me why Xbox still use batteries instead of an rechargable battery pack? I feel like in this day in age it's so wasteful especially when it comes to newer technology. Obviously an old gameboy f.e. still needs them but if you can choose between batteries and a battery pack I don't quite understand this decision. (I don't want to start a console war again I'm just curious.)
Recently broke my Xbox series X controller left joystick and looking into replace it. I'm looking into ordering joysticks from Amazon or Ebay but wasn't sure if there is a specific model for the series X controller.
Thanks for this, I would like to say I got so mad I went outside and smashed my controller cause I spent two hours peeling that cover off just to find out it’s was connected in the middle so I broke my controller but instead of trying to fix it i smashed it but no need to worry cause it’s in bits and peaces now.
I broke my thumbnail trying to pry the handle part off, lmfao. I purchased a tool kit with knobs because my grips were bad, and this helped me! I was worried if I took it apart, it would just fall apart 🥹 not the case. This was super easy and I had it done in 5 min!
I'm having a random xbox one controller problem that came out of no where when I woke up this morning. My right thumbstick is stuck in the up direction, but it's not physically stuck up. It's definitely not a stick drift problem. I don't know what the hell it wrong with this. An example, when I'm on fortnite, my character is just looking straight up while I can move the right thumbstick in any direction, I only can turn left and right, but still looking straight up. Can't look down. I tried another controller and it's doing the same thing. Is it my Xbox one? I turned everything off completely, unplugged everything and tried again and it didn't work. The Xbox menu movement is like supper fast when navigating through options. I don't know if y'all knew this tho, but if you hold the right stick in any direction in the Xbox guide menu, or the home menu, the selection movement will be twice as fast, and I'm stuck with all this and I don't know what the hell is wrong. Please help!
Hello! I have a question! I bought a brand new xbox series x gamepad recently. I've never used gamepads from Microsoft before. It works fine but I noticed that sticks have some moves. If I pull a stick up it just slightly moves up, when I push it down it moves slightly down and then I can click on it as usual for sure. Is it fine to have such idle? That's really strange for me.
who else was nodding their head when he mentioned boiling water ...... pressed plastics have a memory , so boiling water would almost certainly spring it back to its pressed state
good fix....
Thanks Graham 👍
You stop buying
@@Mymatevince you have big brain
@@Mymatevince what else can I use I don’t have a screw driver to unscrew them
this has to be the first tea break fix that was fixed by literally boiling a kettle for your tea XD
Yep lmao
🤣🤣🤣🤣 So true!
@@Mymatevince now, we just need some teabags. Want some Yorkshire Tea, or Twinings, Vince? 😜
@@abzhuofficial Nah PG Tips is where it's at.
@@rhaib Not a bad choice actually. I'd have that
Ah yes, the old method of pressing something against a table to try and mold it. Also great idea with the boiling water. Great video, Vince!
Cool I agree
agreed
Don't try it I got pissed off because it for jammed and snapped the log stick
That bit with the boiling water was genius Vince!
Couldn't believe how well it worked! 😁
Vince, you are a genius! That boiling water trick proves it. Simply amazing, great job! 👍
I'm also amazed by this trick. Maybe larger scale plastic also apply to this, like bended plasic cover from laptops and other.
🤣🤣 I was well chuffed with the result. Didn't think it would work that well!
@@solveit1304 I would start with a slightly lower temp like 60-80C though. I found that some plastics actually start to quickly deform and almost 'melt' at 100C.
I absolutely love these videos,i like to watch them in the morning before school so i can wake up my brain and feel ready to learn Love the channel please keep it up Love from SA
Glad you like them 👍
Vince this video was so useful, not only did you explain how to fix the stick problem but you also explained why every time I try to screw a joycon back together the screws thread! screw left until it clicks, thank you!
(Spoiler) So all that Xbox series x controller stick needed to do was follow Vinces advice and have a cuppa tea to re shape it's self
My face when the piece came out of the boiling water 😲😁!! Thanks for the straightforward video!
When I opened mine, I was upset to find that the peg that holds the thumbstick down had snapped and got stuck inside, however, there was a small hole inside of this that I was able to stick a cut paperclip with some superglue on to fix it, it's working perfectly now. Thanks for showing how to take it apart!
thanks i was trying to figure out how easy it was to fix my dewseign labs controller as the corner of lower outer rubber part by the trigger was knocked loose. you showed me how easy it was and got me over the notion I might break it more
Just downloading your video to watch in the dentists. They don't have WiFi or 4G access for some reason so you get the honor of entertaining me today! (gonna download another of yours as I don't think an 8 minute video will be long enough for their waiting room haha).
This video saved me a shop trip and i managed to fix my controler on the fly. Added bonus is now i know how the thing works.
HELPFUL: You can literally pull the analog sticks straight out of their slots if you don't have access to a screwdriver/can't open the controller. I was literally able to flex the plastic and replace it all without opening the controller. Saved me $60.
what do you do with the stick after
How did you replace it?
Turn screw anti clockwise until you hear a click then the screw won't strip and will follow the same path in, awesome tip, I stripped many screws u til I learned that gem! Liking vid
Nice little fix there. The trick with the boiling water is very cool.
Wicked mate fixed my sons controller n seconds with your video 👍🏻👍🏻
There are thermold plastics and thermoset plastics. One will retain a shape memory and can be coaxed back into shape by heating. Some take a permanent plastic deformation when heated. Can't remember which.
And to answer my own question (thanks google) this is likely a thermoset plastic. They are more rigid and not remoldable. Hence heating can reduce stress and return to it's set shape. Something like ABS can be remelted or reshaped with heat and has a less stable form but more flexibility.
Cheers Tiporari
I've learnt a new trick there with the boiling water. Cheers Vince!
learnt
@@darkfox2401 Yes, learnt.
=D Loved the way that plastic piece re-shaped itself with the boiling water!!!!
So satisfying Chris. I would happily do that again 👍
My friend. Just pop out the loose joystick, and hold it hard to make an oval put I let back on the stick and use like a kitchen knife thats not sharp and push the stick forward as you fit the joystick over it and it will recenter it
thank you my sisters controller was broken and i was able to fix it with this video
Short and sweet, really liked this one even though it was so simple.
Nice one! PS. The Screwing technics are the same for all bolts nuts and screews! Allways start to unscreew (be awear at left hand threads still used at todays cars) and then when you know start tightneing. day after the day i do tyre change from winter to summer tyres at customers cars ther at least one bolt/nut that has 2 or 3 threads. Nutgun can handel it but its nut ok after while...
Cool! I didn’t know that boiling water can fix an analog stick thank you for showing that awesome fix!
Great fix vince great idea with the hot water i would have never thought of that your incredibly skilled and you inspire me alot keep up the amazing work
A nice easy fix there indeed, the boiling water plastic fix was genius!👍👏
the water trick was amazing!
I love these short videos. :)
Nice trick with the hot water. I would’ve never thought of that. 👍🏼
This was the first fix that was fixed before my tea ran out :-)
🤣
that work mat looks brilliant, all the little cubby holes for bits and pieces! where did you get it?
I always enjoy your vids, Vince. Even better when we get an "ezzactly". Keep up the great work, mate.
🤣 Thanks Hamish 👍
Hello there, thanks to your content my dialysis of 4 hours every second day flew by. Especially i like the Tea Break Fix, quick and straight to the point. You are saving the enviroment from becoming landfills. Keep up the great work! Greetings from a phone technician.
Thank you fellow phone technician 👍👍👍 Glad they helped pass the time.
I work in dialysis I am a Biomed… what company do you receive dialysis with
Thanks man this helped a lot I’ve been trying to fix this for weeks
Hey Vince, Lovely video as always. Do you sell many of the products you fix and if so do you have an ebay shop? I'm sure a lot of your subscribers would buy with confidence if you list products. All the best to you and your family, Pete
I don't Pete, they might get filmed in other 'how to' videos, used by myself or sometimes given away to family/friends 👍 I do need to have a sort out at some stage as the house is getting taken over!
Hi Vince. Great video. I have one which looked the same as this but the analog stick is actually broken. You said could be a 10 min fix but looks like I will have to remove the bottom panel, remove both boards and replace the whole analog mechanism from the board and solder a replacement. Is there an easy fix??
Brilliant video. Love the lights round the monitor when you were testing the controller. Have you got the link where I can buy them?
Thanks CLC. The lights behind the monitor are built into it from the manufacturer BUT the lights around the desk were the same ones from the LED light strip video I did a few months ago. Let me know if you can't find it and I will post a link. They were the cheap ones from Amazon, still working fine though 👍 I did an Amazon affiliate link in the description of that video 😁
@@Mymatevince Thank you so much Vince. 👍
This video was very helpful my son broke his left joystick and didn't know what he did to it. But this video showed how to fix it I would definitely like and subscribe it
I cant take off the cover because i dont have those screwdrivers :( is there another way to open it?
look at that You learn something new everyday that's a cool technique cool trick I need to remember that one
Just fixed my controller that I threw across the room. Thank You!!!
Just replaced nec tokins on a01 thanks to your video thanks
Hope it worked for you 👍
I have a question where did you get the screwdriver I’ve been looking all over my house and I can’t find a screwdriver that small and if you would tell me it would really help
It’s a security screw you can get them off Amazon you could strip the little indent in middle so you just use a regular torque screw driver which is what I did but it won’t always come out the way you’d like
Cool job in fixing the controller. Hopefully yiu can do more fixes like that.
Oh the PTSD from my teenage years and all the Xbox 360-controllers I’ve smashed with rage! They were in the two-digit numbers!
🤣🤣🤣🤣
Remember to put the tea bag in AFTER dunking the thumbstick 👍
🤣
I love me some good ol tea
Lovely video, this boiling water trick is perfect! Vince, how about trying to fix video about sawing machine? I recently oiled my girlfriend machine for the first time and boy, this is super clever pure mechanic machine. I think you will love it! Also sounds like interesting video and women will watch it later for constant view increase :)
Thank you. Great suggestion! 👍
I'm curious; how long does it take for the machine to assemble a girlfriend? What kind of girlfriends can this (I assume) well-oiled machine produce?
You’ve helped me fix my controller, but I have another controller that sticks when playing. It’ll zoom through the menu or character will walk on their own when playing. Not broken, but sticky. Would cleaning it fix that or is there a deeper issue needing fixed?
Where do you get number 9 screwdriver
Hey Vince, do you do a teabreak intro for every item? It seems like you'll never know if something will take 10min or 10hrs to fix before you open it to investigate.
Hey 😁 I don't. Sometimes I get caught out on a harder fix, but on those ones I can edit the hell out of them to get the time down. So the gyro ball 'tea break fix' actually should have been a 'trying to fix' as it took a while, but with editing it worked out ok 👍👍
Nice video Vince very helpful and I actually learned quite a few things that I didn’t know
No views, 83 likes, 2 dislikes and 27 comments. I think UA-cam needs to be fixed by Vince next.
lmaoo same came and saw 18 views with 432 likes
Thanks mate , helped me fix my sons controller after he raged out :)
Appreciated !
Fantastic! Had a controller with a slightly weird stick and aside from snapping one of the clips on the hand part of the controller, it was incredibly easy and works like a dream!
That moment when my mate vince releases a video & you realise it’s only a tea break fix :(
I have the same problem I just don’t have the screw bit for the screws are there any other bits that would work?
Vince, do you accept people sending in a broken device repairing it and returning it to the sender? Obviously they’d pay you to do so. But do you do this just wondering or do you always keep the device?
How does that boiling water trick work?
This looked like magic! =P
Shape-memory polymers (SMPs) are polymeric smart materials that have the ability to return from a deformed state (temporary shape) to their original (permanent) shape induced by an external stimulus (trigger), such as temperature change.
I googled it, had no idea myself so I've learned something here that may come in handy.
@@ClayMann
Thanks for the answer! Very appreciated! =)
Where do you get that software that checks your stick drift?
I'd be very interested in your gaming PC idea
so i have a problem with my controller, the problem is in the right joystick top where it can move, theres a slight problem because you can easily move it a bit with a slight touch, while the left joystick takes a little bit more pressure for it to move. and also when i try to "pop" it out (when you lift the joystick up and it makes that pop sound) it doesnt make any noise as the left joystick. is there a problem with the joystick itself or underneath the top joystick? because im not sure if i need to replace the bottom joystick or not and i never soldered or desoldered anything in my young life, most likely from my rage problem but im weak so its not as bad.
A very nice tea time repair. May I suggest you contact the original seller to see if they would like it back for a reasonable price?
how do you find these things on ebay sir and wonderful break time fix.
How in the world do you find a listing like this and there's not some hidden problem that requires lots of time and/or money to fix. That's a good skill to have, finding easy-fix ebay listings.
Haha, I get lucky sometimes but mostly I endure the same eBay pain as the rest 👍
When the plastic piece of analog stick is taken off the joystick underneath, are the joysticks still supposed to stick to the top/bottom/sides? I removed the analog plastic piece and the joystick underneath is sticking but in the video you showed the same..
Yeah nice fix. ^^ reminds me of my mask reshaping procedure where I put a mask into the oven which is forced into a certain shape and cool it off with cold water so it keeps the shape on its own.
Also somebody please explain to me why Xbox still use batteries instead of an rechargable battery pack? I feel like in this day in age it's so wasteful especially when it comes to newer technology. Obviously an old gameboy f.e. still needs them but if you can choose between batteries and a battery pack I don't quite understand this decision. (I don't want to start a console war again I'm just curious.)
Microsoft want to sell you the battery packs and charging leads. It's shameful really.
Recently broke my Xbox series X controller left joystick and looking into replace it. I'm looking into ordering joysticks from Amazon or Ebay but wasn't sure if there is a specific model for the series X controller.
What happened to the video footage? I had seen some flashing black bars and flashing green bars as well?
Hey you should to a video or a series of videos where you cover what tools you have and why you like or dislike them.
Job well done Vince!
Thanks Todd 👍
My gamesir g7 se right thumstick is loose and it does not want to go back to the center. Can you make a video on how to fix it.
Nice job. I didn't know that trick with hot water.
How do u fix a controller, where the analog stick is physically stuck in place, and will move back to said position
BRO u a real one u saved my butt
not all hero's wear capes
This has to be the shortest video he has done in history
Thanks for this,
I would like to say I got so mad I went outside and smashed my controller cause I spent two hours peeling that cover off just to find out it’s was connected in the middle so I broke my controller but instead of trying to fix it i smashed it but no need to worry cause it’s in bits and peaces now.
Duuuude thank you soooo much you literally saved my ass❤️❤️❤️❤️
YES!! New MMV content :)
Hey Mike, cheers mate 👍👍👍👍
Love the video it does help but I need the tool to take out the screws I dont know what it is
I broke my thumbnail trying to pry the handle part off, lmfao. I purchased a tool kit with knobs because my grips were bad, and this helped me! I was worried if I took it apart, it would just fall apart 🥹 not the case. This was super easy and I had it done in 5 min!
I'm having a random xbox one controller problem that came out of no where when I woke up this morning. My right thumbstick is stuck in the up direction, but it's not physically stuck up. It's definitely not a stick drift problem. I don't know what the hell it wrong with this. An example, when I'm on fortnite, my character is just looking straight up while I can move the right thumbstick in any direction, I only can turn left and right, but still looking straight up. Can't look down. I tried another controller and it's doing the same thing. Is it my Xbox one? I turned everything off completely, unplugged everything and tried again and it didn't work. The Xbox menu movement is like supper fast when navigating through options. I don't know if y'all knew this tho, but if you hold the right stick in any direction in the Xbox guide menu, or the home menu, the selection movement will be twice as fast, and I'm stuck with all this and I don't know what the hell is wrong. Please help!
Bro your a genius my kids loosened up my joystick, now I'm going to play fifa 23
Hello! I have a question! I bought a brand new xbox series x gamepad recently. I've never used gamepads from Microsoft before. It works fine but I noticed that sticks have some moves. If I pull a stick up it just slightly moves up, when I push it down it moves slightly down and then I can click on it as usual for sure. Is it fine to have such idle? That's really strange for me.
If you pull up on the joystick a bit and just let the actual metal part of it reset into place, you can just insert it back in and carry on.
such a great vid to follow along to fixed mine in 5 mins cheers mate!
Me not needing this information but enjoying it
Hey Vince I love your videos
Thanks 😁
What is the name of the tool you used to take the screws out?
How did you fix the analog stick not sticking because I’m having the issue
Hey I have a question how can I open my controller If I don't have that kind of screwdriver?
Great video as always,
Thank you
How do you fix the joystick when it’s stuck like the little peg that the joystick is sitting on top of gets stuck when I push it in any direction
nice fix and great tip with the boiling water :)
When I saw easy fix in the title, I thought I was looking at a shady eBay listing
sometimes when i watch your videos(quite few of them) i see some werid green lines flashes shortley or mybe just me
Great video and nice tip to use boiling water
Can you do a video like a how to connect Bluetooth ear buds to a Nintendo switch
What's the tool called again bro?? Tork spit #9? Maybe I should turn subtitles on. Please help
Nice quick fix, well done.