what a piece of equipment! i wouldn't want to work on that. looks too complicated for me 😂. i gives those guys props. and you too for knowing your field so good. Thank you for sharing your knowledge of wells and pumps with us.
60% duty cycle at the full rated 200A. Depending on the task, 100% duty cycle at 60-75% rated amps. That sounds pretty good for a consumer rated welder. If the thing has some longevity, it will be a fantastic tool.
Couple suggestions, when turning the gas on, don’t face the gauge. It’s a ton of psi and people have been seriously hurt from the gauge exploding. Not super common but a good practice. Also no need to open the valve so much, one full turn is all you need. This is also for safety, if something goes wrong you need to turn the gas off very quickly. So if you have the valve wide open it will take to long to close. One full turn takes a second to close.
For the life of me I can't understand why any company would send their equipment to UA-camrs that are not professionally trained in that field here is the perfect example.
You are just a guy who owns a dull welding machine I know how to weld as well practice makes perfect 👍 so keep on going with it I enjoy your videos I wish I could work alone with yall
I enjoyed your video I really like your honesty and you reallycan weld pretty good for a newbie. Keep practising and you will become a really good welder. You are a great instructor and you make the videos so enjoyable. God Bless You richly!!!
Between mig and tig , both run well on straight argon . Arc welding , a good all around rod will be 6011 1/8” . It burns through rust and painted surfaces. Wish I lived closer so I could show you how to weld better . You beads look good for a newbe
My employee was a Welder for 12 years, he was supposed to help me with this Vid but he quit a week earlier to go to a better paying job. So I had to stumble threw it. It's always better on 220v Imo
We had to read the work orders first to see what type they wanted us to use . Straight argon , 75/ 25 . Argon with 10% helium . Some stainless jobs we had to use a mix of argon / oxygen
17:05 you were running way too hot, I’m pretty sure you could knock 5-15 amps off and still get a good weld. If you’re gonna use a glass flux rod, I’d use a 7018 for making your own tools or repairs.
Stickler about safety? Come on, bud. Where's the pants and long sleeves? Not a bad little bead, though, for a 110 welder. Looks like a good little machine.
On your stick learn to do U.U.U. NIce little machine. Long ago a friend in another shop bought a new miller 304 cc/cv and carbon arc on these electrical units and it would not weld right after. I think there is one setting for pushing wire through without gas and another for different mixtrues ar 100 percent aluminum. For stainless tri mix where argon/helium. Out here they could not figure out why their welding was not penetrating 1 inch aluminum plate 20 percent helium fixed a 40,000 mess up. You can take that cup and flip it so you can see what you are doing with the arc and you can also use a straight edge also with cutting to not burn up your boots/shoe laces leather chaps had a woman welder one time not listen to me and she burnt her who ha.... never seen a woman run around that fast in a shop to the hose in all my life. Tried to warn her. And no piercings or rings. Seen fingers come off in my life one man had a grinder ex.plode and spent many hours in surgery. Plasma cutter get old gloves and try the pin hole method to show you what it can do those things can do some damage to flesh/skin. Like any wea.pon treat it with respect. Esab,hypertherm,miller,lincoln its good to see competition. Try sending out for a repair on one of their machines cost almost 2 of these at 1400 dollars. insanity can you imagine the price tag if these were made in the states.
Simder does not honor their warrenty! My daughters 2nd 10 in 1 has stopped high frequency start went out in less tah a year, been over a month and they will not reply to warrenty claim. Beware of this company. If the respond to her I will update this comment
I see $999 today, so I think you are mistaken. If you want the works, that is $1450, but a lot of folks don't need everything all at once. And the everything package is very worth the price if you need the extras.
@@karlhansen5253 I have a whole shop of neat things just i saw there was looking for an older buddy of mine. One thing i recommend on the leash or anything near the plasma cutter is a velco 50 dollar cover for all your plastic leads will save from burning and use sip ties at the end. What they need to include in these units as an offer for sale. Re wrote my comment not sure why it deleted i pushed a button.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Very good products. I'd be overwhelmed with another welding product.
what a piece of equipment! i wouldn't want to work on that. looks too complicated for me 😂. i gives those guys props. and you too for knowing your field so good. Thank you for sharing your knowledge of wells and pumps with us.
60% duty cycle at the full rated 200A. Depending on the task, 100% duty cycle at 60-75% rated amps. That sounds pretty good for a consumer rated welder. If the thing has some longevity, it will be a fantastic tool.
Cool little machine. Thanks for showing it to us
A welder and plasma cutter will definitely come in handy in a shop...
Couple suggestions, when turning the gas on, don’t face the gauge. It’s a ton of psi and people have been seriously hurt from the gauge exploding. Not super common but a good practice. Also no need to open the valve so much, one full turn is all you need. This is also for safety, if something goes wrong you need to turn the gas off very quickly. So if you have the valve wide open it will take to long to close. One full turn takes a second to close.
For the life of me I can't understand why any company would send their equipment to UA-camrs that are not professionally trained in that field here is the perfect example.
Nice looking little machine with lots of features.
You are just a guy who owns a dull welding machine I know how to weld as well practice makes perfect 👍 so keep on going with it I enjoy your videos I wish I could work alone with yall
I enjoyed your video I really like your honesty and you reallycan weld pretty good for a newbie. Keep practising and you will become a really good welder. You are a great instructor and you make the videos so enjoyable. God Bless You richly!!!
Between mig and tig , both run well on straight argon .
Arc welding , a good all around rod will be 6011 1/8” . It burns through rust and painted surfaces.
Wish I lived closer so I could show you how to weld better .
You beads look good for a newbe
My employee was a Welder for 12 years, he was supposed to help me with this Vid but he quit a week earlier to go to a better paying job. So I had to stumble threw it. It's always better on 220v
Imo
Is it rip off when every fabricator in Denver runs 100 percent co2, will that corrupt the weld.
We had to read the work orders first to see what type they wanted us to use . Straight argon , 75/ 25 . Argon with 10% helium . Some stainless jobs we had to use a mix of argon / oxygen
I just bought the pro luxury package and got it for around $1000 with your code.
7:57 “I’m a stickler about safety” as he’s welding on a wood table. lol. Just thought that was funny. Great video though!
😂 the first thing that came to my mind was a Ginger Billy video. Good stuff.
New UA-cam channel coming ' welding with the well driller ' 👍😂🤣😂
Try dual shield flux core
Thanks for the video!
Mig is like hot melt glue with metal. And I'm sure this little machine can do dual shield Mig which is even more awesome.
Keep up the good work
Can you do tig ac with it?
Well, how's it holding up?
Does that unit have a foot pedal option for tig?
Mine also did not come with a foot pedal for the tig welder. But with your discount code I got it for 749.00
Nice! I just used it again yesterday. Solid unit!
17:05 you were running way too hot, I’m pretty sure you could knock 5-15 amps off and still get a good weld. If you’re gonna use a glass flux rod, I’d use a 7018 for making your own tools or repairs.
did it ever overheat when using the plasma feature?
Is that a flame proof rug on the floor 😊 it is a nice welder. I bought one with my own money
Can it do 150 amp act for 5 minutes at a time?
Stickler about safety? Come on, bud. Where's the pants and long sleeves? Not a bad little bead, though, for a 110 welder. Looks like a good little machine.
What about long sleeves
Every machine is different always have to play and adjust the settings depending on type of material and thickness of material....
Advise me on a more name brand combo for this price.
Tig is fairly easy
Nice.............. was waiting patiently for your next vid. BTW, all of US is 240 VAC.............. not 220.
Cool!
Dont have to be an expect at a welder... its a good skill to have.. just practice. More you practice better you will be...
I'm more of a grinder than a welder.
Like you said, you're not professional, but an excellent review of the equipment. TY
On your stick learn to do U.U.U. NIce little machine. Long ago a friend in another shop bought a new miller 304 cc/cv and carbon arc on these electrical units and it would not weld right after. I think there is one setting for pushing wire through without gas and another for different mixtrues ar 100 percent aluminum. For stainless tri mix where argon/helium. Out here they could not figure out why their welding was not penetrating 1 inch aluminum plate 20 percent helium fixed a 40,000 mess up. You can take that cup and flip it so you can see what you are doing with the arc and you can also use a straight edge also with cutting to not burn up your boots/shoe laces leather chaps had a woman welder one time not listen to me and she burnt her who ha.... never seen a woman run around that fast in a shop to the hose in all my life. Tried to warn her. And no piercings or rings. Seen fingers come off in my life one man had a grinder ex.plode and spent many hours in surgery. Plasma cutter get old gloves and try the pin hole method to show you what it can do those things can do some damage to flesh/skin. Like any wea.pon treat it with respect. Esab,hypertherm,miller,lincoln its good to see competition. Try sending out for a repair on one of their machines cost almost 2 of these at 1400 dollars. insanity can you imagine the price tag if these were made in the states.
Looks like my booger welding! LOL!
US$1300 ?????
Welding in shorts? Not very safe!
Never ever use a plasma gun like a hammer to knock your cut metal loose. You will mess up the tip in the gun .
Simder does not honor their warrenty! My daughters 2nd 10 in 1 has stopped high frequency start went out in less tah a year, been over a month and they will not reply to warrenty claim. Beware of this company. If the respond to her I will update this comment
Nope back up to 1400 bucks.
I see $999 today, so I think you are mistaken. If you want the works, that is $1450, but a lot of folks don't need everything all at once. And the everything package is very worth the price if you need the extras.
@@karlhansen5253 I have a whole shop of neat things just i saw there was looking for an older buddy of mine. One thing i recommend on the leash or anything near the plasma cutter is a velco 50 dollar cover for all your plastic leads will save from burning and use sip ties at the end. What they need to include in these units as an offer for sale. Re wrote my comment not sure why it deleted i pushed a button.
Why would someone make a video on something....To get it for free thats why lol. Its no secret
Here's a link to a free Welder Below
👌
I have companies send me stuff all the time to review, I will only make videos on products I truly like and will recommend
@@h2omechanic LMAO
Have you not welded enough to burn your neck and arms, by not wearing long sleeves and a neck protector?.
When I built my race car I learned that lesson in a bad way. But 3 minutes of welding won't hurt ya.
👍
Sounds like you are not running it hot enough.