Great video. I am just getting into cloning modules and have so much to learn. Have done nothing but program new/ some used ecus for the past 8 years. Can you show GM cloning?
I would like to know is how to decode the tear tag to know what eeprom and micro chip it has. I have obdstar and VVDI prog and VVDI multiprog and the number they show doesn't match the number on my ecu and bcm. But the picture they show matches them . But even the tag on their picture doesn't match any number they show
Getting ready to purchase kess3 or hexprog2. Right now I do cloning with im608, obdstar dc706, and ecuhero. My primary focus is cloning used modules for shops, and programming using Cardaq. I don’t do performance tuning. I know there’s no tool that does it all, but If it’s one or the other, which would you recommend? Just trying to step up my business. Any input is appreciated. My market area is a good mix of domestic, Asian, and euro.
Can you fix a radio out of a dodge ? It turns off randomly and not volume control.. I can get more info Monday when I go back to work dont remember year or model off top of my head
I think that I did buy an L! computer for my 1999 dodge ram van, 3500 5.9 gas truck. This computer did not last long. Apparently the soldering is insufficient to take the engine bay heat. Components de solder. I need to put the PCM inside the cab and that needs a extension for the computer cord. Six ft. would do. I constantly get the NO BUS warning. When it feels like it wants to work it will start. This is unacceptable. I could get a donner PCM from a junkyard and use it for a connection box. Or I could cut all 59 wires and extend each one. I would use but connectors with the solder option. The new location would be under the air conditioning.
Global commerce on UA-cam is another real smart guy cloning and programming
Is not about to be smart
It’s just decision to invest in tools
All of this tools is self explanatory
😂😂😂😂😂@@julioalay7004
That software download is blocked and flagged as virus or malware
Great video. I am just getting into cloning modules and have so much to learn. Have done nothing but program new/ some used ecus for the past 8 years. Can you show GM cloning?
I would like to know is how to decode the tear tag to know what eeprom and micro chip it has. I have obdstar and VVDI prog and VVDI multiprog and the number they show doesn't match the number on my ecu and bcm. But the picture they show matches them . But even the tag on their picture doesn't match any number they show
what did the EcuHero rep do?
That's nice to know that hexprog can read 2014 gpec 3 hw2
Awesome video... "like a fat kid trying to get into a duct taped pancake" . Gold lol
I have a question, please, it is possible to clone a rack pinion or also be able to change the Bin number.?in a bench mode
Getting ready to purchase kess3 or hexprog2. Right now I do cloning with im608, obdstar dc706, and ecuhero. My primary focus is cloning used modules for shops, and programming using Cardaq. I don’t do performance tuning. I know there’s no tool that does it all, but If it’s one or the other, which would you recommend? Just trying to step up my business. Any input is appreciated. My market area is a good mix of domestic, Asian, and euro.
What is the worst module to reprogram or to repair? I’m sure they all have the corks.
Does hex prog have illustrations on wherethe Eeproms are located on various boards?
Where do you find info for eeprom locations.
Keith is my Hero! 😮😅
Keith can I learn what you doing now on your website, eeprom work, cloning
yep
I have a jeepgrand cherokee 3.0 diesel I need my pcm flashed how do I get ahold of you to do it
does your company repair or refurbish vehicles computers, 1992-1996 ford trucks?
Can you fix a radio out of a dodge ? It turns off randomly and not volume control.. I can get more info Monday when I go back to work dont remember year or model off top of my head
What would you use to clone a 2019 Dodge Ram BCM
When I download ecuvillian it says Trojan virus detected?
yep, its not signed by microsoft so that happens.
I think that I did buy an L! computer for my 1999 dodge ram van, 3500 5.9 gas truck. This computer did not last long. Apparently the soldering is insufficient to take the engine bay heat. Components de solder. I need to put the PCM inside the cab and that needs a extension for the computer cord. Six ft. would do. I constantly get the NO BUS warning. When it feels like it wants to work it will start. This is unacceptable. I could get a donner PCM from a junkyard and use it for a connection box. Or I could cut all 59 wires and extend each one. I would use but connectors with the solder option. The new location would be under the air conditioning.
This is extremely interesting and informative. (EEPROM: Electronically Erasable Programmable Read-Only Memory)
what is ecuvillain??
A free version of some paid software represented by a person with a vendetta against me. LOL.
@@L1Training ecu hero? i've tried ecuvillain on two different laptops, whats required for the program to work? like windows 10? .netframework? etc
Great Channel Kieth.
Can you say what Pcmflash Module Can Read GPEC2 Or GPEC3 Without Opening.
Thanks
I subscribed for your interesting content, but as an archive video, it's hard to follow your process.
💥💥💥💥
Hello my friend please what kind of microscope do you use in your work can you put the link and also is this programming tool good . 💐💥💥 Thanks
No chat replay. Well crap. Still good tho.
Good morning my frind u can do that jop buy obd2