I did try for the can at 200 yards but was unsuccessful, i was by myself out there and had not spotter to see if i was getting close, my holdover was like 10 ft.
The moderator is a 75mm shorty that i printed, im also testing vent holes on to to help reduce muzzle flip. Its not super quiet but ot does take the bark out and i dont need to use hearing pro.
I just bought a cabelas pellet trap for this pistol. Blew out the back of it in 6 shots….and that’s with it turned down to 750-800fps. I gotta find a better trap! Thanks for posting the vids, fun to watch
@@Boom.Strike ok I’ll get one rated for rimfire, thanks! yeah you have a nice range to shoot at too, I’m jealous. You are getting pretty damn good off hand!
100 yard I just knew the holdover, it's about 9 inches, 200 yards I bag rested the gun till I seen it hit the orange fence it was just a few shots,then just went for it, holdover was about 10ft or about halfway up the trees in the background, probably luck involved but I have hit targets at the distance a few times recently, im still looking for the appropriate fitting slugs then I'll try for a soda can at 200.
The flashing target a Caldwell Flashbang, it was only around $30 and are very bright and can take a few direct hits to the leds and still have others work. I highly recommend.
Thank you very much. i saw your video. I'm sorry but my English is not so good. Can you tell me were i can purchase the same moderation you used? Kind regards, Ron from the Netherlands.
@@rondorland9987 hi, it is custom 3D printed suppressor i made but im not currently selling any. It was a modified free design from Thingiverse 3D site.
A 3 inch long custom 3D printed with muzzle break ports , that i made and testing , its not silent but it definitely takes out the bark and im playing with different size and shape ports to try and keep the muzzle flip to a minimum.
I say yes, I have seen people getting over 80 fpe out of it! Comparable to what you get with .22 LR and that ammo has "done the job" many many times. I have a friend who owns a dispensary who is looking into this gun for self defense because he can't have a gun due to the cannabis.
@@Doobie603 ok that definitely gives me some clarity on it , have you seen the hp max 50 cal , would you go for that or this ! …. I’m torn between the two honestly
@@diontaehickmond9314 I personally would want the Huben GK1 because it is more of a pistol and the Max is really getting close to carbine size, I am on a farm and I am gonna use it for pesting small animals and putting animals fown for slaughter. If I was gonna use it for hunting or if I had larger pest like coyotes I would lean towards the crazy power of the HP (over 300 fpe I heard for about 4 shots). The Huben will kill a coyote with a well placed shot but that .50 will just plain kill it with just about any shot. So it really depends on what you use it for. I think they are coming out with an aftermarket stock for the Huben so you can use it as a carbine also. The magazine capacity is way different too the Huben has 19 mag and the HP Max has a 6 shot mag for obvious reasons lol. HP max goes up to 4500 psi and Huben goes to 5000 psi so with the Huben you will need to have a compressor that goea up that high to get everything out of it, I think alot of them obly go to 4500 psi. lots to think about....
It was a 10 or 12 inch target , I definitely could see it and even make out the soda can, I was holding over about 10 ft for the shots, definitely some luck involved I'm sure. Soda can shots were unsuccessful. Maybe a spotter next time.
This pistol cannot shoot 200 yrd off hand, with a red dot this kind of grouping with pellets. You need slugs, a magnifying optic, a spotter and a bag rest. I have the pistol, I have the trainning (10m target pistol), I have the equipment and the ammo needed, I have shot over 5000 round and I think your video is false because no speciffics are given.
The time from the shot to the impact is way off that’s like 25 yards and 50 you view of the range was done at 50 and 100 everything looks father on video scammer
Incredible! I can't wait to get mine
Grateful for every video of the GK1 you share 👍
Awesome that pistol is definitely in a league of it's own I always wanted the rifle but now I'm leaning more towards the Gk1
I will soon have both! B-)
@@thehaze1972 lekker jy👍
I did try for the can at 200 yards but was unsuccessful, i was by myself out there and had not spotter to see if i was getting close, my holdover was like 10 ft.
Get you the 3d printed kit that allows you to add a stock , scope mount and bipod and you'll be ringing that steel every time at range
For sure, the GK1 is one accurate puppy 🐶. The Macabespeed stock kit looks great.
That is some DAMN fine shooting. Thank you for sharing with us.
Amazing air pistol and the shooter has amazing accuracy. For an air pistol to be effective at 100 yards is super impressive.
Very nice shooting at 100 yards!🤠
Great shooting man.
Wow, excellent shooting! What ldc you have on it? I really enjoy your videos, keep-em coming.
The moderator is a 75mm shorty that i printed, im also testing vent holes on to to help reduce muzzle flip. Its not super quiet but ot does take the bark out and i dont need to use hearing pro.
Just the fact that it is accurate at 100 yards was good enough for me.🤠🇺🇸
Ya, its definitely not a precision long range beast but definitely very accurate to 100 yards
Extremely impressive, and nice views plus sound!! What is the brand/model of the LED indicator attached to the back of the steel plate?
Thanks, light is a Caldwell Flashbang, only about $30 and works very well and can even take a few direct hits and keep working.
Great shooting !!!
I just bought a cabelas pellet trap for this pistol. Blew out the back of it in 6 shots….and that’s with it turned down to 750-800fps. I gotta find a better trap! Thanks for posting the vids, fun to watch
You probably need a rimfire trap or just make your own
All my targets i shoot are rimfire or above rated , most are 1/4 AR500 steel ,nice ring to them.
@@Boom.Strike ok I’ll get one rated for rimfire, thanks! yeah you have a nice range to shoot at too, I’m jealous. You are getting pretty damn good off hand!
Impressive shooting! Be fun to start testing it when it arrives, hopefully in a week or two. :-)
How much head room were you giving each distance. You must have been doing a lot of shots to get the amount of drop off in advance.
100 yard I just knew the holdover, it's about 9 inches, 200 yards I bag rested the gun till I seen it hit the orange fence it was just a few shots,then just went for it, holdover was about 10ft or about halfway up the trees in the background, probably luck involved but I have hit targets at the distance a few times recently, im still looking for the appropriate fitting slugs then I'll try for a soda can at 200.
Wow… You are the perfect match for that gun.
Thanks, it felt right at home the first time I held it. It's definitely in a league of its own.
hello!
Good video!
What is your led target please ?
The flashing target a Caldwell Flashbang, it was only around $30 and are very bright and can take a few direct hits to the leds and still have others work. I highly recommend.
Are you the one who made the mounting rmr mounting plate and loading gate and fill port plug?
Nope,I seen something like that on Airgun Nation forum though .
Yea, I just traded a guy who 3d prints some good quality accessories for this air pistol
Sounds like Michael Myers with that breathing
awesome shootin tex.
Happy to subscribe, my friend.
Thanks
What calibur? 22 or 25
Hello,
would you tell me please witch red dot sight you used?
Truglo tru tac micro and a Monstrum ruger 10/22 mount, i have a video on here with basic installation and details in the description.
Thank you very much. i saw your video. I'm sorry but my English is not so good. Can you tell me were i can purchase the same moderation you used?
Kind regards,
Ron from the Netherlands.
@@rondorland9987 hi, it is custom 3D printed suppressor i made but im not currently selling any. It was a modified free design from Thingiverse 3D site.
Truglo tru tac micro, and a Monstrum ruger 10/22 mount bought bon Amazon. I do have a basic installation video and description of parts on UA-cam
That's a shame.
@@Boom.Strike
What muzzle muffler you have on that .25?
A 3 inch long custom 3D printed with muzzle break ports , that i made and testing , its not silent but it definitely takes out the bark and im playing with different size and shape ports to try and keep the muzzle flip to a minimum.
@@Boom.Strike good shooting, I think I may pull the trigger and get a .25 cal. What size tank are you using for refills?
@@papaonthego5079 my tanks are 74 cu ft, good for about 1000 shots or so.
Could this be a self defense tool
I say yes, I have seen people getting over 80 fpe out of it! Comparable to what you get with .22 LR and that ammo has "done the job" many many times. I have a friend who owns a dispensary who is looking into this gun for self defense because he can't have a gun due to the cannabis.
@@Doobie603 ok that definitely gives me some clarity on it , have you seen the hp max 50 cal , would you go for that or this ! …. I’m torn between the two honestly
@@diontaehickmond9314 I personally would want the Huben GK1 because it is more of a pistol and the Max is really getting close to carbine size, I am on a farm and I am gonna use it for pesting small animals and putting animals fown for slaughter. If I was gonna use it for hunting or if I had larger pest like coyotes I would lean towards the crazy power of the HP (over 300 fpe I heard for about 4 shots). The Huben will kill a coyote with a well placed shot but that .50 will just plain kill it with just about any shot. So it really depends on what you use it for. I think they are coming out with an aftermarket stock for the Huben so you can use it as a carbine also. The magazine capacity is way different too the Huben has 19 mag and the HP Max has a 6 shot mag for obvious reasons lol. HP max goes up to 4500 psi and Huben goes to 5000 psi so with the Huben you will need to have a compressor that goea up that high to get everything out of it, I think alot of them obly go to 4500 psi. lots to think about....
I know it hits at least 50 fpe at 100 I wonder what it carries at 200.
Well, enough to totally flatten pellets 😁
The power can be adjusted to 87fpe.
@@undeadaeon9992 no I mean at 100 yards it still carries enough energy to blow right through 3/4 inch pine boards.
Omg impresionante 🤩 🤩🤩🤩🤩🤩👌🏻
Impressive!
Yep, this pistol is pure awesome 😜
@@Boom.Strike fact! I can’t stop shooting it
Off hand means firing with the non dominant hand. Don't think it qualifies when using both hands. Good shooting from standing though.👍
Thanks, my meaning of "off hand ) was unsupported shooting (no rest)
How could you see so far down without a scope...100 yards is hard enough let alone 200.not possible.
It was a 10 or 12 inch target , I definitely could see it and even make out the soda can, I was holding over about 10 ft for the shots, definitely some luck involved I'm sure. Soda can shots were unsuccessful. Maybe a spotter next time.
Super 👍
Niceeeee respect 👍😉
Crack shot bud
Thanks, im sure its a little bit me but the pistol is Superb.
This pistol cannot shoot 200 yrd off hand, with a red dot this kind of grouping with pellets.
You need slugs, a magnifying optic, a spotter and a bag rest.
I have the pistol, I have the trainning (10m target pistol), I have the equipment and the ammo needed, I have shot over 5000 round and I think your video is false because no speciffics are given.
Topy
The time from the shot to the impact is way off that’s like 25 yards and 50 you view of the range was done at 50 and 100 everything looks father on video scammer