I've got this one and absolutely love it. If you want really, really loud, try: 16 grain full open on 350 bar : will do 1220 fps (MACH 1.1). Funniest part: Did it with the silencer, and it was really really quiet while turning it up, and all of a sudden it became positively deafening. First thought I broke something, but turned out it was the pellet going supersonic. This, is an awsome pistol, much more impressive then its bigger brother (got the .25 K1 as well), given the form factor and the mentioned air efficiency.
I got the buck rail ar grip adapter with a magpul moe k and it’s awesome! I have a folding stock on it too. Then a 1-4 lpvo and the Donny go Yokozuna. I wish I could post pictures cuz it looks soooo good!
I love this thing, and I pretty much always run it on lowest power. Normally get over 60 shots before I bother refilling. I've got a buck rail adapter, little hawke red dot, and sig folding stock still with the beautiful wood grip. Probably my favorite air gun. You're very lucky you didn't jam it though, I've jammed mine, broke an o-ring depressurizing, and it takes quite a while to tear down to fix. Beautifully put together, wonderful video support online for fixing it, but kinda like fixing a clock inside with all the little bits.
Hubrn GK1: Can ANYONE tell me if there's a limit stop for the power adjustment screen? Or does it back out until it falls out? Or blows out under pressure? I am trying to find out just how far the power screw can be adjusted. I have a reconditioned GK1 .25 that seems weak even with the screwed bscked out 2-1/2 turns. I'm shooting 25gr pellets with a full fill yet only getting 720 FPS which is much less than others are claiming. Can I turn it out 3 turns? Out 3-1/2?
Brother love your channel and the information you put out glad you're doing this pistol this is one of the ones I'm looking at in that class. Only thing is it is hard to stay with you for too long your add is killing me. You start out on good information about the gun and then all the sudden you go somewhere else and you lose my attention. I'd rather find to say that is directing to the point. Understand you're doing live. But before you put up video, shoot your test then go back and edit the information on the gun specs and everything and then post video. Just saying I did the same thing when I first would do modifications in car parts. I got same information Anne criticisms. My videos would be 20 25 minutes end up losing a lot of people halfway through. Edit it same exact information instead of being 20-25 minutes went down to 11 or 12. My likes and subscribe went up.. but quality and information is great, keep it up.
Hey there. I appreciate the feedback. It's interesting because when I was doing shorter, more condensed videos, folks complained they were too rushed and just an ad for the product. So, I guess we need to find a middle ground. On another note, live videos are what they are. I don't spend a lot of time editing them because it's simply not in the budget. Based on my recent talks with YT, we are in the process of revamping our filming and production work. Hopefully, we'll find that balance. AGW is going to focus on demos, tutorials, and basic usage, more to help folks who already own the products. We also have GTA, which will focus on enthusiast-level, unsponsored reviews. We will still produce videos to support our pro-tier banner ad sponsors, but our GRiP reviews will be independent and not paid for work. We are in a transition phase. Hopefully, you and others will appreciate our efforts to bring various video formats across multiple channels so that folks can get what they want. We can't please everyone, but we will do our best to maintain our integrity and do what we do for as long as it is practical. Cheers AGW
@@AirGunWeb NEWS FLASH 💥........To anyone whining about free videos. There's actually a way to move forward within the video itself. Just tell them to ask any 7 year old they happen to see. 😂
I've got this one and absolutely love it. If you want really, really loud, try: 16 grain full open on 350 bar : will do 1220 fps (MACH 1.1). Funniest part: Did it with the silencer, and it was really really quiet while turning it up, and all of a sudden it became positively deafening. First thought I broke something, but turned out it was the pellet going supersonic.
This, is an awsome pistol, much more impressive then its bigger brother (got the .25 K1 as well), given the form factor and the mentioned air efficiency.
Love the channel! Had airguns as a kid, huge firearms enthusiast and getting into much more precision airguns in these later years! Keep it up!
Absolutely love my GK1 and my K1, my two favorite pcp's out of the 12 i have.
I love running 14-16 grain pellets at 25-30 FPE. That gives me 2 mags with a about 50 fps spread.
Got both 22 and 25
Buck rail and Bravo 3D Have decent carbine kits.
There is a ton of aftermarket adapters for adding a stock to get a little mini carbine.
I got the buck rail ar grip adapter with a magpul moe k and it’s awesome! I have a folding stock on it too. Then a 1-4 lpvo and the Donny go Yokozuna. I wish I could post pictures cuz it looks soooo good!
I love this thing, and I pretty much always run it on lowest power. Normally get over 60 shots before I bother refilling. I've got a buck rail adapter, little hawke red dot, and sig folding stock still with the beautiful wood grip. Probably my favorite air gun. You're very lucky you didn't jam it though, I've jammed mine, broke an o-ring depressurizing, and it takes quite a while to tear down to fix. Beautifully put together, wonderful video support online for fixing it, but kinda like fixing a clock inside with all the little bits.
I'd like to know where in the UK I can purchase this particular item. I would prefer to see it in person and ask a few questions about it.
Hubrn GK1: Can ANYONE tell me if there's a limit stop for the power adjustment screen? Or does it back out until it falls out? Or blows out under pressure?
I am trying to find out just how far the power screw can be adjusted. I have a reconditioned GK1 .25 that seems weak even with the screwed bscked out 2-1/2 turns. I'm shooting 25gr pellets with a full fill yet only getting 720 FPS which is much less than others are claiming.
Can I turn it out 3 turns? Out 3-1/2?
Bloke in the uk already made a folding stock which is on the market
The maximum Energy i had was with 40gr slug @350 Bar = 97.5 Joule
👍🏻
Always BETTER when you lead with the PRICE.
GK1 is not regulated.. At least not in this stock configuration.
5k/5500 psi fills.
Brother love your channel and the information you put out glad you're doing this pistol this is one of the ones I'm looking at in that class. Only thing is it is hard to stay with you for too long your add is killing me. You start out on good information about the gun and then all the sudden you go somewhere else and you lose my attention. I'd rather find to say that is directing to the point. Understand you're doing live. But before you put up video, shoot your test then go back and edit the information on the gun specs and everything and then post video. Just saying I did the same thing when I first would do modifications in car parts. I got same information Anne criticisms. My videos would be 20 25 minutes end up losing a lot of people halfway through. Edit it same exact information instead of being 20-25 minutes went down to 11 or 12. My likes and subscribe went up.. but quality and information is great, keep it up.
Hey there. I appreciate the feedback. It's interesting because when I was doing shorter, more condensed videos, folks complained they were too rushed and just an ad for the product. So, I guess we need to find a middle ground. On another note, live videos are what they are. I don't spend a lot of time editing them because it's simply not in the budget.
Based on my recent talks with YT, we are in the process of revamping our filming and production work. Hopefully, we'll find that balance. AGW is going to focus on demos, tutorials, and basic usage, more to help folks who already own the products.
We also have GTA, which will focus on enthusiast-level, unsponsored reviews. We will still produce videos to support our pro-tier banner ad sponsors, but our GRiP reviews will be independent and not paid for work.
We are in a transition phase. Hopefully, you and others will appreciate our efforts to bring various video formats across multiple channels so that folks can get what they want. We can't please everyone, but we will do our best to maintain our integrity and do what we do for as long as it is practical.
Cheers
AGW
@@AirGunWeb NEWS FLASH 💥........To anyone whining about free videos. There's actually a way to move forward within the video itself. Just tell them to ask any 7 year old they happen to see. 😂
Bintac t9