Tiger Sport 1050 12K Service Part 4 - Spark Plugs, Air Filter and Throttle Body Balance

Поділитися
Вставка
  • Опубліковано 12 сер 2023
  • Tiger Sport 1050 2019 Model
    12K Service Part 4
    Spark Plugs, Air Filter and Throttle Body Balance
    Parts
    Spark Plug NGK CR8EIA-9
    Spark Plug Gap 0.7 mm +0.05/-0.1 mm
    Air Filter T2204820
    Tools
    4 MM Allen Key
    5 MM Allen Key
    8 MM Socket
    10 MM Socket
    T15 Torx Bit
    10MM Sparkplug Socket
    Torque Settings
    Spark Plug torque 12 Nm
    Airbox Trumpet Screws 6 Nm
    Airbox Cover Screws 1.5 Nm
    Map Sensor Screws 1.5 Nm
    Immobiliser/TPMS Module Screws 1.5 Nm
    Fuel Tank Front Mount 9 Nm
    Fuel Tank Rear Fixings 7 Nm

КОМЕНТАРІ • 23

  • @user-mz4yc8kt6z
    @user-mz4yc8kt6z 2 місяці тому +1

    Thank for this vídeo

  • @davidseery4388
    @davidseery4388 4 місяці тому +1

    Well done learned something from ur video

  • @gvybin
    @gvybin 9 місяців тому +1

    Thank you for this very clear tutorial. It helped me out. I noticed that my 2016 Tiger sport 1050 had a set of NGK CR8EIA9 iridium sparkplugs installed at 20.000km. These have a longevity of 160.000 km( 100.000 miles) so I ended up replacing them without changing. The sparkplugs only have 20.000km on the counter, so even if I decide to change them at halve their livespan, I can ride another 60.000km with them.

  • @zzzpip
    @zzzpip 4 місяці тому

    nice vids,do the tanks bubble like the earlier version cheers.

  • @michaelwinstanley2849
    @michaelwinstanley2849 10 місяців тому

    Thanks for the video made life much easier especially that far left cylinder, regards from Melbourne Australia.

    • @upnorthbiker
      @upnorthbiker  10 місяців тому

      Yep that cylinder is a pain. Glad it helped

  • @NikitaChe76
    @NikitaChe76 4 місяці тому

    nice clock on the wall ).

    • @upnorthbiker
      @upnorthbiker  4 місяці тому

      Made it a while ago. There is a video of it being made on my channel

  • @philhart3878
    @philhart3878 11 місяців тому

    Nice one UNB. I’ve had my fairings off several times now and it does become a doddle. The tang and grommet idea is great in my opinion. Always take the big fairing off first. Just the one screw under the headlight, then slide forward like you showed. Brilliant! Suggest those trying this job understand how it works before sliding the fairings back on.(Mine had been mullered by some cretin too). £248 for a replacement.
    That left spark plug removal. CHEAP DOUBLE ENDED SHORT BOX SPANNERS! First one will drop down onto the plug. Second one will fit into the first and stick out so’s you can get a spanner on it. Worked nicely for me.
    Another way to lift the spark plugs out is to use a length of rubber hose that is a snug fit over the ceramic. Also good for starting the plugs when replacing. No chance of cross threading.
    (That fuel connector can be a bastard ‘till you know how it works can’t it!)😊

    • @upnorthbiker
      @upnorthbiker  11 місяців тому

      When I finish this series I will do a follow up video called Phil’s tiger tips as you have lots of good ideas.

    • @mcflid81
      @mcflid81 7 місяців тому +1

      @@upnorthbiker True to your word. Thanks for the Phil's Tiger Tips video 👏

  • @user-mz4yc8kt6z
    @user-mz4yc8kt6z 2 місяці тому

    Sou do Brasil e vou fazer a troca

    • @upnorthbiker
      @upnorthbiker  2 місяці тому

      Good news. I worked in Brazil for a short while in Curitiba. I really enjoyed the country and the people were so friendly.

  • @chrishumbert6399
    @chrishumbert6399 8 місяців тому

    Thanks for the video, very clear and useful as usual. However, it would habe been interesting to know the values of the throttle balancing and a quick explanation of how to balance them with the screws. Thanks. Chris

    • @upnorthbiker
      @upnorthbiker  8 місяців тому

      Agreed. I expected to have to adjust them but they were spot on. If you have to adjust them it is trial and error. Adjust one only and see if it looks like they can be balanced, if not try a different one. I am sure there will be other videos showing this on a tiger or a speed triple which is a very similar engine.

    • @chrishumbert6399
      @chrishumbert6399 8 місяців тому

      Is there not a standard value to adjust them from the repair manual?

    • @upnorthbiker
      @upnorthbiker  7 місяців тому

      Not that I am aware of but they should be around 440-470 mmHG. The key is to get them all the same rather than a specific value.

  • @jimdawson3395
    @jimdawson3395 11 місяців тому

    Get a swivel socket head, sometimes called a universal socket head. Makes getting that last plug out a non-issue.

    • @upnorthbiker
      @upnorthbiker  11 місяців тому

      Thanks Jim. I tried mine but with it all being 1/2 inch drive everything was a little too wide or the extension bars were too long or too short. I will try the box spanner idea from Phil to see if that works next time or buy a spark plug socket for my 3/8 or 1/4 set if I can get one.

    • @jimdawson3395
      @jimdawson3395 11 місяців тому +1

      @@upnorthbiker I got a set of 3 different size swivel heads. Think I use the 3/8 inch one on the Tiger plugs

  • @Massi1986
    @Massi1986 20 годин тому

    Hi dear, have a 2015 version of the Tiger Sport, what are your thoughts about a sport air filter like BMC or K&N? Any improvement maybe with a central update? Thanks! You did a good job here! 🫱🏻‍🫲🏼

    • @upnorthbiker
      @upnorthbiker  18 годин тому

      Anything that helps the bike breathe easier will improve the performance. I doubt it would need remapping if that was the only change.