Це відео не доступне.
Перепрошуємо.
One Day Your BMW E90 WILL Require This | Quarter Window DIY
Вставка
- Опубліковано 18 жов 2019
- In this video I show you how to replace the rear quarter glass window seal that is built into the rear door.
Over time this seal crumbles away and becomes an eye store. It deteriorates in a similar way to the rear window seal and the front upper seal.
Plan for this to take a few hours and to have your car down for about a day.
You can purchase the door seals here (affiliate):
bit.ly/32unB0P
bit.ly/2BpNdQu
The black door trims (affiliate):
bit.ly/35El1r0
bit.ly/2VRw77w
bit.ly/35KwpSn
bit.ly/2MQAHPr
The 3M Urethane (affiliate):
amzn.to/32CCyhD
The Black Plasti Dip (Affiliate):
amzn.to/2qlHxol
The Door Moulding Clips (affiliate):
bit.ly/2nXPr6J
If this is the first video you're catching of mine consider subscribing. I upload regularly.
Thanks for watching! When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!
Great video, after a break-in my right quarter window was smashed. Ordered parts and within one hour it was done. Saved some serious Euro's. Thanks!
Finally found exactly what I was looking for my E90 has the same issue along with rear window and I couldn't find any DIY stuff...Thx.
Thanks for all the great E9x content my friend! I have saved every single video no joke.
Thank you so much for this video! I bought the replacement trim about 3 months ago and I just haven’t had the time to do the research on getting it installed.
The final piece of my jigsaw puzzle. I bought a used rear door from a breaker. It was a bare door but still had a tinted rear quarter glass. What a job to strip my old door of all the seals, lift motor and lock assembly. It came with tinted quarter glass so I needed to swap it for my clear original. I spent a long time puzzling until I found your video. Thanks very much.
Keep up the good content sir, hopefully your channel gets lots of subscribers one day. I really like all your DIY and upgrades to your e9x although i have a e92 it still give me an idea to all the DIY and upgrades. 👍🏼
Love all you’re content it’s really helpful it gives me so much more insight and information then any other person doing it thank you 🙏🏼 so much for the content
I bought the trim but been too lazy to do it because I couldn't find a DIY. Thanks for taking the time to show us.
Excellent Job as well as the video! Mad props! What a pain in the ass with all the trim rotting out on these cars.
Great job as always man . FYI I used to use plasti dip for black trim . Then i discovered trim and bumper black from rustoleum . Finish looks amazing . I know u will love . If u haven’t tried already .
Dude, you’re an AMAZING DIYer! Your information and knowledge behind why you do something is invaluable and honestly so very much appreciated. I’m one of those people that when asked to do something I say “Why?” Not to be an asshole but because I really want to know for what reason logically. That being said your painting/spaying of the plasti-dip was killing me to watch. Just in case you were curious as to why sprayers start and stop pressing the button. It’s so as to not create spotting on the piece they’re painting. You have to start and stop pressing that button PAST the piece not in the middle. You’ll either have dark and light contrasting color in the paint or texture that is unlike the rest. Just figured I’d let you know...Otherwise another fantastic diy. Thanks again
I watch every one of your videos bro. Great videos!
Very helpful man saved me a bunch of time
Nice DIY! Thanks for doing this!
Yup I gotta do this too! Thanks for sharing! Nice cars!!
Content never fails to please the die hard enthusiast, looking forward to the next video
Thanks for the info, it help me on replacing the small glass!
That would have been a perfect candidate to wrap the trim vs plastidip. Metrorestyling sells a nice semigloss 3M wrap cut specific for that job. Did mine a few ears ago and it’s still looking great. Maybe a future video when the plastidip gives up.
Thanks very much - well produced video.
Professional. Well done video!
Dope ty for this video 👍
Thank you so Much I now owe you a Beer !!!! Now I can tackle my X5 with that problem
I need to do this and was hoping it would be simpler… ooohh bmw
This will help me out on how to replace my E60 rear quarter glass. Got stuck when I realised I needed to cut into the silicon weld.
"... becomes an eye store."
... becomes an eye sore.
Good video. I hope I do not have to do this on the rear quarter windows of my coupe.
Couldnt be better timing! Great video! Thanks
Thank you.
Just as an informative note, you can fully slide the chrome piece out, so you don't have to lift up and risk bending it.
I’ve been looking for your video on the inside trim piece with felt. My windows keep getting scratched and want to fix it.
Great video! I didn’t have this exact issue on my E90 but my entire window trim that runs from the rear quarter window to the front window needed to be replaced (the part you painted in the video). I can’t remember how much it cost but I think the part cost close to $200. Specifically the shorter piece that connects to the longer piece was falling off and it was definitely an eye sore!
Good content. 👍 Your voice sounds to Dexter Morgan. 😀
I have watched this video so many times trying to decide if i want to do this fix on my e90. I wish someone would just 3d print the outer trim piece and sell it. That way we could avoid such a big job for such a small issue.
How is it holding up ??? Curious to see since others usually put primer
Vehicular DIY Thanks, please can you make video how to code the ECU for using Ethanol E85 instead of standard gasoline.
would this apply to the e60 as well? i just did my rear window upper seal that was completely disintegrated. thanks for the content!
I have a similar issue on my e70 x5. I haven't been able to find instructions for replacing that. Can you help ?
The trimming at the 7:47 mark ,where can I get the foam/rubber seal that goes behind it I was able to a very good set of the trims for both sides but it’s missing the plastic trim an also the rubber foamish trim
If my seals are perfect but I need to replace the small window can i re use the seals or should I buy new ones?
Nice
Hey man thanks for this video. I am jelous watching it because on my E71 I am told that there is no way I can replace these crumbling rubber seals without replacing the whole rear triangular window!!! 400 Euro each side!
Do you have any advise?
Ware did you get the seals ?
What’s the frame panel above that called? I’m trying to replace mines
Not the weather stripping but the plastic around it that goes around the rear small window came off What can I do?
Do you know how to remove the roof rack trim pieces, they run Front to Back, on each sides of the roof. One right above the drivers side doors and the other right between the passenger doors and the actual metal roof panel itself..
I dont know what they would be called, maybe roof rail trims.
They have the little access "doors" to get to the mounting point for the oem roof rack bars, they bolt into the threads in the roof of the car, theres 4 mounting points on the E90 & E92. All E90s, E91s, & E92 have them..
Anyway mine are oem style aluminum trim and its oxidizing alittle in spots if i dont keep up with the trim often, and plus id like to paint the plast dip black or just have them painted gloss black to match the body color of my car. But im sure theres a bunch of people out there with that same issue also. I couldn't tell in this video, of the condition of your Roof Rail Trim Pieces..
How much will charge if you would change my seals?
At 6:47 you mention silicone “adhesive” but appears to be lubricant. Pointing this out so people don’t go glueing their rubber seals on!
The one that it’s gone it’s the e30 right ?😞
Suggest painting the interior of your headlights black.... The oem grey looks kinda awkward on a black car
Hello so for a BMW X3
Great video. Thanks! What happens if you don’t replace it? Is it gonna be leaking or is this rubber more for esthetic purposes?
Hi, it won't leak. Just for esthetic purposes.
All the weather stripping on the car of the same material does the same thing, its really annoying and very fast wearing.
My windshield outer rubber and my sunroof trim rubber was crumbling off...
Great!
Does this part fit an E60 5 Series as well?
No. Different part number but same process i believe.
Where you located at?
I need this done on my E46 and E53. Dealer said they can't guarantee that they won't break the glass taking it out. Ouch!?!?
If they told you that they trash 😒 take it to a auto glass shop probably better deals...BMW always saying they can't guarantee breaking something doing else they told me that when I came in for a simple light fixture recall 😂😂😂
@@Bone4444 Yeah good idea. My local stealership wanted to charge me $500 on a bad turn signal socket. It was just a cheap bulb that lead melted onto the socket from arcing. I replaced the socket and bulb no problems since. They wanted to replace those 2 things and the housing too. Of course it wouldn't match the other side so then I would need it replaced also. SMH
Someone shattered my rear quarter window with their door so this should be a decent video guide on how to replace it rather than paying 400$ for a glass company to fix that little window.
When you gonna swap the engine???
For what, exactly?
@@machtschnell7452 For the sake of building a serious race car?
E60s babies do this as well unfortunately 😔
E60,s are just as bad.
You would think such a prestigious car manufacturer could at least get the UV recipe for a rubber compound , even lada does better .
Hello so for a BMW X3