Great job. Wow is the whole car vinyl wrapped? Just curious as to why the door wasn’t painted instead. Not sure yet on whether to have gloss black on the pillars on my black e90 as I have the chrome window trims already. You should get blacked out side markers though. It makes a huge difference trust me. 👍🏻
@@businessmindset2976 Then perhaps a newer BMW might become bothersome when it comes time to throw money around lol these E90s have a lott of modules that can fail. But a base model will have a more reliable engine I suppose.
Triveni Pillay The low fat one worked for me. I usually apply it with a microfiber towel and let it sink in for about 5 minutes and repeat that 3 times in total. Should look brand new after.
Think I just messaged you about some wheels on FB! Wheels look great! What model are they? The look similar to some BBS's I have run in the past, but with different lips. Keep up the good work.
Lowering a BMW (or, any other car for that matter) is so incredibly dumb! Totally screws up the performance aspects of the original suspension engineering!
@Michael Patrick Moore But this isn’t a performance car 🤔 and what I mean by this is that THIS car is a Stanced car and not meant to be capable of putting down a low time at an Auto-X event. You do realize there is this group of people called “car enthusiast” and within this group there are different car cultures i.e. fans of lowriders, fans of Rat Rod’s etc... or are you that daft and/or self absorbed that you think “me no like car that different. Bmw only go round corner faster, not go slow and low?” 🙄 f**kin retards. I personally dig how this dude does everything. I love working on my cars that’s what this hobby is all about. I’m not a huge fan of stanced BMW’s or really the stanced look but I can appreciate why some people would be, and I know how to keep my mouth shut when I don’t like something. I’m not a little elementary school student that has to $hlt on peoples videos
muffler and resonator delete is the most cost effective way to go. any other exhaust system isn’t worth the money in my opinion. I had the bmw performance exhaust and I can say I like my straight piper setup more 👍
@@esgworks yo just curious since im at that point too you have primary cats off your headers and the rest is streight piping? Any service engine light for you if thats your setup?
I’m almost certain this will hold up better than a vinyl wrap and wrap has an orange peel finish, no where near as close to these piano black mirror-like finish pillars
Try out some trim restorer on some of the faded plastics. Don't know if this is in the US but I used insta finish trim magic and it really brought back the dark new look to the really faded plastics on my car
@@KelsS1k yes id agree however for unpainted plastics that trim restorer is really good. My fiesta had really faded bare plastic door handles and it brought back that nice dark new plastic look. If the door trim is painted on the BMW I'd agree and say to give it a good polish with a machine polisher 👍
@@zaink7037 i used trim restorer and it doesnt really work on that part of the car, its ok on vinyl and plastic but i think those pillars are metal and the trim restorer is useless there
my handles at the door, the rubbererd leatherd ones are melting with the sun and are almost destroyed(I mean the passangers and the rear seats handles) any replacement or DIY method to find a solution?
I’ve seen restorations of the e46 plastic interior parts. It’s the same issue with the e9x. There’s a ton of methods on the e46 forums. I’m sure you’ll find something useful there 👌 I’ll do some research as well, and if i find a great solution I’ll most definitely make a video on it!
The wrap and pillars came out nice bro!!! GOOD JOB...
Looks sick bro, keep putting out those vids!
My favourite car channel!
Need to make more vids man😢
thanks homie got more content coming!!
Pillars really do look great
new bmws have gloss black around the whole thing if u got high gloss shadow line with extended contents
Your content is hella good man keep it up
Love them I just ordered the car in fiber ones
How do you remove the trim around the door/window? Mine is scratching and need to replace it. Back door
"A Must Do" I Will Put Real Carbon On My Door Pillar And No One Can Stop Me.
BTW Nice Video Mate!
Awesome video really enjoy watching
Good work kid.
Keep making videos man!
Thank you mine are all scratched up
Nice vids man keep going💯
Thank you!🙏
Great vid my guy 👏🏾👏🏾
thanks dude!
Getto at its best .
I need to learn how to wrap LOL it looks easy
Mirrors, is there a wrap for them?
Great thing bro
Great job. Wow is the whole car vinyl wrapped? Just curious as to why the door wasn’t painted instead. Not sure yet on whether to have gloss black on the pillars on my black e90 as I have the chrome window trims already. You should get blacked out side markers though. It makes a huge difference trust me. 👍🏻
thank you! yeah the whole car is vinyl wrapped red. original color is titanium silver 😅
Got those, where can I get chrome window trim
@@businessmindset2976 Dealership, ebay, or have a non base model E90 lol
SXE10Gamer can’t afford none base model at 19 years old lol
@@businessmindset2976 Then perhaps a newer BMW might become bothersome when it comes time to throw money around lol these E90s have a lott of modules that can fail. But a base model will have a more reliable engine I suppose.
Fantastic!
Hi . Any suggestions on what product will work to remove light scratches from the gloss black trim ?
milk
HA78 NHAL Thank you for your recommendation. Please tell me, how do I apply? How long do I keep it on ? Can any type of milk be used ? Thanks
Triveni Pillay The low fat one worked for me. I usually apply it with a microfiber towel and let it sink in for about 5 minutes and repeat that 3 times in total. Should look brand new after.
HA78 NHAL Thank you ! I will definitely give this a try !
@@t.p8783 it worked?
Thanks for.letting us know they're mad flimsy before dropping $50 on these for my sc300.
if they were really thick they would look ridiculous on the car
Where’d your brother get the gloss black side mirror trim piece that holds the mirror to the car??
M3 Bimmer It’s factory on the M-Sport equipped E90/E92s, i believe it’s called the shadow line trim
Hi,
What is the material for B pillar trim which is black gloss ?
Think I just messaged you about some wheels on FB! Wheels look great! What model are they? The look similar to some BBS's I have run in the past, but with different lips. Keep up the good work.
damn that’s wild lol, thank you! they’re RS 740, Bmw Style 42s 👍😎
ebay link doesnt work anymore
Did you replace the rear shocks when you went air ride?
Rudedoggy_ 760 yeah bro, i have airlift shocks all around 👌
ESG looks real good dude. Ima get the 3p as well for my e92. Did you order from bag riders?
Rudedoggy_ 760 I ordered from an airlift sales rep @sseuro on ig
ESG did you get the suspension and management too from him? I only see the bag suspension from his website
Rudedoggy_ 760 yeah I got everything bro, you gotta send him a DM 👍
Where did you order your bbs caps from?
I bought them from eBay, they’re Evo 8 BBS caps. Had to custom make them fit
Lowering a BMW (or, any other car for that matter) is so incredibly dumb! Totally screws up the performance aspects of the original suspension engineering!
You’re right!
Not if you get coilovers and tune it for perfection.
AGREED
@Michael Patrick Moore
But this isn’t a performance car 🤔 and what I mean by this is that THIS car is a Stanced car and not meant to be capable of putting down a low time at an Auto-X event. You do realize there is this group of people called “car enthusiast” and within this group there are different car cultures i.e. fans of lowriders, fans of Rat Rod’s etc... or are you that daft and/or self absorbed that you think “me no like car that different. Bmw only go round corner faster, not go slow and low?”
🙄 f**kin retards. I personally dig how this dude does everything. I love working on my cars that’s what this hobby is all about. I’m not a huge fan of stanced BMW’s or really the stanced look but I can appreciate why some people would be, and I know how to keep my mouth shut when I don’t like something. I’m not a little elementary school student that has to $hlt on peoples videos
Sorry that is not true most performance cars are lowered from factory or are lowered to increase performance
How did he do the top with the carbon fibre wrap
It’s wrapped in carbon fiber, I believe the film was made by 3M if I remember correctly
ESG thanks
Fantastic! Do you have some e90 325 performance exhaust to recommend?
muffler and resonator delete is the most cost effective way to go. any other exhaust system isn’t worth the money in my opinion. I had the bmw performance exhaust and I can say I like my straight piper setup more 👍
ESG iam a little bit nervous about cutting in my original exhaust cuz when I sell the car it will drop in price
Teddy Herrlin just save it, you can have it welded back on
ESG okay thanks for replying!! Love your videos!
@@esgworks yo just curious since im at that point too you have primary cats off your headers and the rest is streight piping? Any service engine light for you if thats your setup?
Can u help me find them
Dude you can just vynil wrap them with high quality stuff. Those you stick on are just from China.
I’m almost certain this will hold up better than a vinyl wrap and wrap has an orange peel finish, no where near as close to these piano black mirror-like finish pillars
Try out some trim restorer on some of the faded plastics. Don't know if this is in the US but I used insta finish trim magic and it really brought back the dark new look to the really faded plastics on my car
I’ll look into it, thanks homie!
Right Answer is Polishing it
@@KelsS1k yes id agree however for unpainted plastics that trim restorer is really good. My fiesta had really faded bare plastic door handles and it brought back that nice dark new plastic look. If the door trim is painted on the BMW I'd agree and say to give it a good polish with a machine polisher 👍
@@zaink7037 i used trim restorer and it doesnt really work on that part of the car, its ok on vinyl and plastic but i think those pillars are metal and the trim restorer is useless there
More vids yes!!! Do you mind start vlogging as well?
I’d actually like to once I have a larger audience 👌
@@esgworks I am sure vlogging and more content will boost your audience!
looks terrible because is not flush - replace for original pillars or paint them
Will these fit 2011 bmw328xi
If it’s a sedan yeah!
wow all i have to do is peel?
The pillars come off. Just take the plastic trim inside of the door off and unscrew the torx bits behind it
yeah except I think the actual gloss black pillars themselves are pretty expensive :(
@@esgworks Unfortunately yes, can still be done with the plastic stickers though :)
No lie , looks like shit. Was there now way to tuck under the rubber window trim?
anything you stick on over the top of something with 3m looks cheap AF, just wrap them in gloss black that looks so much better
Black vinyl has a lot of Orange peel and is no where near a mirror finish like these
Do you work or are you still in college ?
took like one or two classes and decided it wasn’t for me. I just work a part time job, and everything else is on the side 👍
@@esgworks mad respect for you bro, fuck school.
those wheels look dumb as fuck with not having tire over it
True fuck boi move, buy a BMW and lower it.
You do not know jack about tire fitment.
M3 wanna-be CF tape on roof is pathetic.
You walking buddy
Nice bit horrible paint job on that car all arou nd
It’s wrapped lol
Soooo ghetto
my handles at the door, the rubbererd leatherd ones are melting with the sun and are almost destroyed(I mean the passangers and the rear seats handles) any replacement or DIY method to find a solution?
I’ve seen restorations of the e46 plastic interior parts. It’s the same issue with the e9x. There’s a ton of methods on the e46 forums. I’m sure you’ll find something useful there 👌 I’ll do some research as well, and if i find a great solution I’ll most definitely make a video on it!